Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB UA16-30-10RA-240 is a 3-pole capacitor switching contactor with built-in damping resistors, a 12.5 kvar AC-6b rating at 400–415 V AC and a 230–240 V AC 50 Hz control coil.
£87.22
The ABB UA16-30-10RA-240 is a 3-pole capacitor switching contactor with built-in damping resistors, designed for reliable switching of capacitor banks in power factor correction systems. As part of the ABB UA..RA capacitor contactor series, it is engineered to limit the high inrush currents associated with capacitor energisation.
The UA16-30-10RA uses early-make auxiliary poles connected through damping resistors to pre-charge the capacitors before the main contacts close. This arrangement helps damp the highest current peak during capacitor switching and makes the UA..RA design suitable for applications where very high capacitor inrush currents can occur.
ABB order code 1SBL181024R8810 provides 3 normally open main poles, an integrated 1NO auxiliary contact and a 230–240 V AC, 50 Hz control coil. The UA16-30-10RA is rated at 12.5 kvar at 400–415 V AC, 40 °C under AC-6b capacitor-switching duty.
Capacitor banks can draw very high transient currents when energised. The ABB UA..RA contactor design addresses this by using auxiliary poles and damping resistors to pre-charge the capacitors before the main poles close, reducing the severity of the initial current peak and supporting dependable repetitive switching.
The UA16-30-10RA is specifically intended for capacitor switching duty and provides a compact three-pole solution for automatic power factor correction equipment. Its integrated resistor arrangement eliminates the need to treat it as a conventional motor contactor and provides switching characteristics tailored to capacitive loads.
Tick the specs you need, then view products that match.
| Terminal Type | Screw | |
|---|---|---|
| Series | UA..RA Capacitor Switching Contactors | |
| ABB order code | 1SBL181024R8810 | |
| Product type | Capacitor switching contactor with damping resistors | |
| Number of poles | 3 | |
| Main contact configuration | 3NO | |
| Built-in auxiliary contacts | 1NO + 0NC | |
| Utilisation category | AC-6b | |
| Rated operational power at 400–415 V AC, 40 °C | 12.5 kvar | |
| Rated operational power at 230–240 V AC, 40 °C | 8 kvar | |
| Maximum rated operational voltage | 690 V AC | |
| Rated control circuit voltage at 50 Hz | 230–240 V AC | |
| Rated control circuit voltage at 60 Hz | 240–260 V AC | |
| Rated frequency | 50 / 60 Hz | |
| Terminal type | Screw terminals | |
| Dimensions (H × W × D) | approx. 120 × 44 × 107 mm | |
| Weight | approx. 0.46 kg | |
| ABB product group | 311503-Contactors A Small (Frctl) |
The ABB UA16-30-10RA-240 is designed for switching capacitor banks, particularly in automatic power factor correction and reactive power compensation systems.
The UA16-30-10RA is rated at 12.5 kvar at 400–415 V AC and 40 °C under AC-6b capacitor-switching duty.
The built-in damping resistors work with early-make auxiliary poles to pre-charge the capacitor before the main contacts close, helping limit the high inrush-current peak associated with capacitor energisation.
This exact version is rated for a 230–240 V AC, 50 Hz control supply; ABB also specifies 240–260 V AC at 60 Hz for this coil code.
The contactor has three normally open main contacts and one built-in normally open auxiliary contact.
ABB UA..RA capacitor switching contactors are purpose-designed for power factor correction applications where capacitor inrush current must be effectively controlled. The UA16-30-10RA-240 combines three-pole switching, built-in damping resistors and a 230–240 V AC, 50 Hz control coil in a compact industrial contactor.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.