Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Lovato 11BGP0901A02460 BGP09 three-pole minicontactor with a 9 A AC-3 rating, 4 kW motor rating at 400 V AC, 24 V AC 60 Hz coil, 1NC auxiliary contact and rear PCB solder pins.
£32.12
The Lovato 11BGP0901A02460 is a compact three-pole power minicontactor with rear PCB solder pins designed for reliable motor and load switching in industrial automation, machinery and OEM electronic assemblies. Part of the Lovato BGP09 series, it combines three normally open main power contacts with an integrated normally closed auxiliary contact in a compact contactor format.
The contactor provides an AC-3 operational current of 9 A at up to 440 V and supports three-phase motor loads up to 4 kW at 400 V AC. Its conventional free-air thermal current is 20 A, while the integrated 1NC auxiliary contact provides a convenient interface for signalling, interlocking and control functions.
This specific 11BGP0901A02460 version uses a 24 V AC, 60 Hz control coil and rear PCB solder-pin connections for direct integration with printed circuit board assemblies. With a rated insulation voltage of 500 V and compact BGP09 construction, it is particularly well suited to OEM machinery and control equipment where efficient PCB integration and dependable contactor switching are required.
Minicontactors such as the Lovato BGP09 provide electromagnetic switching between low-power control circuitry and higher-power motor or load circuits. Energising the contactor coil closes the three normally open main contacts, allowing automated control systems to switch three-phase loads without carrying the full load current through the electronic control circuitry.
The BGP09 configuration is particularly suited to OEM equipment requiring direct printed circuit board integration. Rear solder pins allow the contactor to interface directly with a PCB, while the integrated 1NC auxiliary contact can be used for signalling, electrical interlocking and control feedback within machinery and automation systems.
Tick the specs you need, then view products that match.
| Terminal Type | PCB / pins | |
|---|---|---|
| Coil Voltage Range | 24 V | |
| Power | 4 kW | |
| Current | 9 A | |
| Poles | 3-pole | |
| Coil / Supply Voltage | 24 V AC | |
| Device Type | Mini contactor | |
| Auxiliary Contacts | 1NC | |
| Coil Type | AC | |
| Current AC-1 | 20 A | |
| HS Code | 85365080 | |
| Manufacturer | Lovato Electric | |
| Series | BGP09 | |
| Product designation | BGP09 | |
| Model / order code | 11BGP0901A02460 | |
| Product type | Three-pole power minicontactor | |
| Number of poles | 3 | |
| Main contact configuration | 3NO | |
| Built-in auxiliary contacts | 1NC | |
| Conventional free-air thermal current Ith at ≤40 °C | 20 A | |
| AC-1 operational current at ≤40 °C | 20 A | |
| AC-1 operational current at ≤55 °C | 18 A | |
| AC-1 operational current at ≤70 °C | 15 A | |
| AC-3 operational current at ≤440 V | 9 A | |
| AC-4 operational current at 400 V | 4 A | |
| AC-3 motor power at 230 V | 2.2 kW | |
| AC-3 motor power at 400 V | 4 kW | |
| AC-3 motor power at 415 V | 4.3 kW | |
| AC-3 motor power at 440 V | 4.5 kW | |
| AC-3 motor power at 500 V | 5 kW | |
| Rated coil voltage | 24 V AC | |
| Coil frequency | 60 Hz | |
| Rated insulation voltage | 500 V | |
| Rated impulse withstand voltage | 6 kV | |
| Short-time allowable current for 10 s | 96 A | |
| Making capacity | 92 A RMS | |
| Breaking capacity at 440 V | 72 A | |
| Electrical connection | Rear PCB solder pin | |
| Operating temperature | -50 to +70 °C | |
| Dimensions (H × W × D) | 58 × 44 × 57 mm | |
| Weight | approx. 200 g | |
| Standards | IEC/EN 60947-1, IEC/EN 60947-4-1, UL 60947-1, UL 60947-4-1, CSA C22.2 No. 60947-1 and CSA C22.2 No. 60947-4-1 |
The Lovato 11BGP0901A02460 is a three-pole minicontactor designed for switching motors and other electrical loads, particularly in industrial and OEM applications requiring direct PCB integration.
The contactor has an AC-3 operational current of 9 A and supports three-phase motor loads up to 4 kW at 400 V AC.
This specific BGP09 version uses a 24 V AC control coil designed for 60 Hz operation.
Yes. It includes one built-in normally closed (1NC) auxiliary contact for signalling, feedback and electrical interlocking functions.
The 11BGP0901A02460 uses rear PCB solder pins, allowing the contactor to be integrated directly into printed circuit board assemblies used in industrial and OEM equipment.
Lovato BGP series minicontactors provide compact and dependable motor and load switching with PCB-compatible connections, making them well suited to industrial automation, machinery and high-volume OEM control equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.