Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB AD1NO-15m analogue electromechanical daily time switch with one normally open contact, 15-minute programming intervals, 16(4) A switching capacity and a 230 V AC supply for automatic electrical load control.
£71.29
The ABB AD1NO-15m is an analogue electromechanical 24-hour daily time switch designed for automatic control of electrical loads according to a repeating daily programme. Its straightforward mechanical programming and compact single-module construction make it suitable for lighting, heating, ventilation, irrigation and other scheduled electrical equipment.
The AD1NO-15m uses a 96-pin programming dial with a minimum switching interval of 15 minutes. It provides one normally open (1NO) contact and a three-position manual selector for permanent OFF, automatic and permanent ON operation, allowing convenient manual control when the programmed schedule needs to be overridden.
Operating from a 230 V AC, 50/60 Hz supply, the timer provides a 16(4) A at 250 V AC switching capacity. This non-reserve version uses mains-synchronised timekeeping and occupies only one DIN module, providing a simple and space-efficient solution where continuous mains power is available.
The ABB AD1NO-15m provides automatic switching according to a repeating 24-hour schedule without requiring digital menus or external programming equipment. Its mechanical dial divides each day into 96 programmable 15-minute intervals, making recurring operating periods quick and straightforward to configure.
The single normally open contact and three-position manual selector provide practical circuit control, while the compact one-module DIN-rail enclosure minimises panel-space requirements. As the non-reserve version of the AD1NO series, it is particularly suitable for installations where continuous mains power is available and backup timekeeping is not required.
Tick the specs you need, then view products that match.
| Mounting Type | DIN rail | |
|---|---|---|
| Device Type | Time switch | |
| ABB order code | 2CSM222471R1000 | |
| Product type | Analogue electromechanical daily time switch | |
| Product group | Time Switches | |
| Programme | Daily / 24 hours | |
| Number of channels | 1 | |
| Contact type | 1 normally open (1NO) | |
| Supply voltage | 230 V AC | |
| Rated frequency | 50/60 Hz | |
| Switching capacity | 16(4) A at 250 V AC | |
| Resistive load capacity | 16 A | |
| Inductive load capacity | 4 A | |
| Maximum switching power | 4000 VA | |
| Incandescent lamp load | 2500 W | |
| Fluorescent lamp load | 1200 VA | |
| Low-voltage halogen load | 2000 VA | |
| 230 V halogen load | 2500 W | |
| CFL load | 900 VA | |
| LED load | 100 VA | |
| Power consumption | ≤0.5 W | |
| Minimum switching interval | 15 minutes | |
| Number of switching intervals | 96 | |
| Switching accuracy | ±5 minutes | |
| Operating accuracy | ±1 second/day at 23 °C | |
| Running reserve | None | |
| Manual control | Permanent OFF / Automatic / Permanent ON | |
| Protection rating | IP20 | |
| Protection class | Class II | |
| Pollution degree | 2 | |
| Operating temperature | -10 to +45 °C | |
| Storage temperature | -20 to +60 °C | |
| Maximum terminal cross-section | 4 mm² | |
| Terminal type | Captive screw terminals | |
| Terminal tightening torque | 0.3 N·m | |
| Mounting type | DIN rail | |
| Modular width | 1 DIN module | |
| Width | 17.5 mm | |
| Height | 66 mm | |
| Depth | 90 mm | |
| Net weight | approx. 0.072 kg | |
| Standard | EN 60730-2-7 | |
| EAN | 8012542224716 |
The AD1NO-15m automatically switches electrical loads according to a repeating 24-hour daily programme, making it suitable for lighting, heating, ventilation, irrigation and other scheduled equipment.
The minimum switching interval is 15 minutes, with 96 switching intervals available around the 24-hour programming dial.
The AD1NO-15m provides one normally open (1NO) contact with a switching capacity of 16(4) A at 250 V AC.
No. The AD1NO-15m is the non-reserve version and relies on the mains supply for timekeeping. The AD1NO-R-15m is the corresponding version with a running reserve.
The AD1NO-15m operates from a 230 V AC, 50/60 Hz supply.
ABB analogue time switches provide dependable automatic load control, combining straightforward mechanical programming, practical manual operation and compact DIN-rail installation for residential, commercial and building-services applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.