Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB CM-MSS.41P thermistor motor protection relay 1SVR740712R1200 with one PTC sensor circuit, configurable fault monitoring, 24–240 V AC/DC supply, two changeover outputs and push-in terminals.
£107.22
The ABB CM-MSS.41P is a configurable thermistor motor protection relay designed to monitor PTC temperature sensors embedded in electric motor windings. Supplied under ABB order code 1SVR740712R1200, it belongs to the ABB CM-MSS thermistor motor protection relay series and helps protect motors against excessive winding temperatures caused by overload, heavy starting, frequent switching, high ambient temperature or insufficient cooling.
The CM-MSS.41P features one PTC sensor circuit with configurable short-circuit detection, dynamic interrupted-wire monitoring and non-volatile fault storage. It supports automatic, manual or remote reset and incorporates a reset/test button, providing flexible configuration for demanding motor protection and industrial safety applications.
Operating from a wide 24–240 V AC/DC control supply, the CM-MSS.41P provides two changeover (SPDT) output contacts rated at 250 V / 4 A. Its compact 22.5 mm DIN rail housing and maintenance-free Easy Connect push-in terminals simplify installation in motor control centres, machinery and industrial control panels.
PTC thermistors installed within motor windings provide direct temperature supervision by changing resistance as the winding temperature approaches a defined response point. The ABB CM-MSS.41P evaluates this sensor circuit and changes the state of its output contacts when an overtemperature condition is detected, allowing the associated control system to stop the motor or initiate an alarm.
In addition to temperature monitoring, the CM-MSS.41P supervises the sensor circuit for wiring faults and provides configurable fault storage and reset behaviour. These capabilities make it suitable for demanding motor protection systems where dependable thermal monitoring and diagnostic functionality are required.
Tick the specs you need, then view products that match.
| Reset Type | Manual or automatic | |
|---|---|---|
| Monitoring Function | Temperature / thermistor | |
| Series | CM-MSS | |
| ABB order code | 1SVR740712R1200 | |
| Product group | 310921-Measuring & Monitoring Relays | |
| Product type | Thermistor motor protection relay | |
| Sensor type | PTC Type A thermistor | |
| Number of sensor circuits | 1 | |
| Overtemperature switch-off resistance | 2.8 kΩ ±1% | |
| Overtemperature switch-on resistance | 1.1 kΩ ±1% | |
| Maximum total cold-state sensor resistance | <750 Ω | |
| Short-circuit detection | Configurable | |
| Interrupted-wire detection | Dynamic | |
| Fault storage | Configurable, non-volatile | |
| Reset functions | Automatic, manual or remote | |
| Test function | Yes | |
| Rated control supply voltage | 24–240 V AC/DC | |
| Rated frequency | 15–400 Hz | |
| Outputs | 2 changeover (SPDT) contacts | |
| Contact rating | 250 V / 4 A | |
| Reaction time of safety function | <100 ms | |
| Connection technology | Push-in / screwless terminals | |
| Protection rating | Housing IP50, terminals IP20 | |
| Operating temperature | -25 to +60 °C | |
| Storage temperature | -40 to +85 °C | |
| Mounting | DIN rail | |
| Width | 22.5 mm | |
| Height | 85.6 mm | |
| Depth | 103.7 mm | |
| Net weight | approx. 0.13 kg | |
| EAN | 4013614496561 |
The CM-MSS.41P monitors PTC temperature sensors installed in electric motor windings and provides protection against excessive motor temperatures.
The CM-MSS.41P operates from a wide 24–240 V AC/DC control supply.
The relay provides two changeover (SPDT) output contacts, enabling flexible integration with motor shutdown, alarm and control circuits.
Yes. The CM-MSS.41P provides configurable short-circuit detection and dynamic interrupted-wire detection for supervision of the PTC sensor circuit.
The CM-MSS.41P supports automatic, manual and remote reset, allowing its reset behaviour to be configured for the application.
ABB CM-MSS thermistor motor protection relays provide dependable PTC temperature monitoring, sensor-circuit supervision and flexible control functions for protecting electric motors in industrial machinery and automation systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.