Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1SVR730831R1400 ABB CM-ESS.2S Voltage Monitoring Relay 220–240 V AC
ABB CM-ESS.2S (1SVR730831R1400) single-phase voltage monitoring relay with 220–240 V AC control supply, four selectable AC/DC voltage measuring ranges from 3 V to 600 V, configurable overvoltage or undervoltage monitoring, adjustable hysteresis, 0.1–30 s tripping delay and two changeover contacts for industrial electrical control and automation applications.
£125.93
Why Choose the ABB CM-ESS.2S Voltage Monitoring Relay?
The ABB CM-ESS.2S (1SVR730831R1400) is a compact and reliable single-phase voltage monitoring relay designed to detect overvoltage and undervoltage conditions in industrial electrical systems. As part of the ABB CM-ESS voltage monitoring relay series, it provides accurate voltage supervision for electrical equipment, machinery and automation applications requiring dependable monitoring and fault detection.
This monitoring relay features a True RMS measuring principle for AC and DC voltages, with four selectable measuring ranges covering 3–600 V. Its configurable overvoltage and undervoltage monitoring functions, adjustable switching threshold, hysteresis and tripping delay allow engineers to adapt the relay to different operating requirements. Two changeover output contacts provide flexible signalling and straightforward integration with industrial control systems.
With a rated control supply voltage of 220–240 V AC and four selectable voltage measuring ranges of 3–30 V, 6–60 V, 30–300 V and 60–600 V, the CM-ESS.2S is suitable for monitoring electrical supply conditions, control circuits and industrial equipment. Its compact 22.5 mm housing and DIN rail mounting design enable straightforward installation inside electrical control panels and automation cabinets.
Key Advantages
- Reliable single-phase voltage monitoring relay for industrial electrical systems.
- 220–240 V AC control supply suitable for industrial control circuits.
- Four selectable voltage measuring ranges covering 3–600 V AC/DC.
- Configurable overvoltage and undervoltage monitoring functions.
- True RMS measurement for dependable AC and DC voltage supervision.
- Two changeover (SPDT) output contacts rated at 250 V / 4 A.
- Adjustable hysteresis from 3–30% helps prevent unwanted switching around the threshold.
- Adjustable tripping delay from 0.1–30 s, with an instantaneous setting.
- Front-mounted adjustment controls simplify configuration and commissioning.
- Three LED indicators provide convenient visual operating status information.
- Compact DIN rail mounting design helps conserve space inside electrical control cabinets.
- Secure screw terminal connections simplify installation and maintenance.
Key Features
- ABB CM-ESS.2 voltage monitoring relay series.
- Manufacturer part number: 1SVR730831R1400.
- 220–240 V AC rated control supply voltage.
- Four selectable voltage measuring ranges: 3–30 V, 6–60 V, 30–300 V and 60–600 V.
- True RMS measuring principle for AC and DC voltages.
- Selectable overvoltage or undervoltage monitoring.
- Adjustable hysteresis: 3–30% of the threshold value.
- Adjustable tripping delay: 0 s or 0.1–30 s.
- Two changeover (SPDT) output contacts rated at 250 V / 4 A.
- Open-circuit operating principle.
- Three LED indicators for operating and relay status.
- Precise adjustment using front-face operating controls.
- Double-chamber cage connection terminals with screw connections.
- 22.5 mm housing width for space-efficient installation.
- Tool-free mounting and removal from DIN rails.
- Flame-retardant housing material classified UL 94 V-0.
- Optional sealable transparent cover for protection against unauthorised adjustments.
Technical Specifications
- Manufacturer: ABB
- Series: CM-ESS.2 Voltage Monitoring Relays
- Model: CM-ESS.2S
- ABB order code: 1SVR730831R1400
- ABB product group: 310921-Measuring & Monitoring Relays
- Product type: Single-phase voltage monitoring relay
- Rated control supply voltage: 220–240 V AC
- Monitoring function: Overvoltage or undervoltage
- Measuring principle: True RMS measurement for AC and DC voltages
- Measuring range 1: 3–30 V
- Measuring range 2: 6–60 V
- Measuring range 3: 30–300 V
- Measuring range 4: 60–600 V
- Hysteresis: Adjustable, 3–30% of threshold value
- Tripping delay: 0 s or adjustable 0.1–30 s
- Output contacts: 2 changeover (SPDT) contacts
- Contact rating: 250 V / 4 A
- UL/CSA contact rating: B300
- Maximum operating voltage (UL/CSA): 300 V AC, output circuit
- Operating principle: Open-circuit principle
- Status indication: 3 LEDs
- Terminal type: Screw terminals with double-chamber cage connections
- Terminal tightening torque: 0.8 N·m
- Protection rating: IP50 housing / IP20 terminals
- Mounting type: DIN rail mounting
- Housing flammability classification: UL 94 V-0
- Operating ambient temperature: −20 to +60 °C
- Storage temperature: −40 to +85 °C
- Dimensions (H × W × D): 85.6 × 22.5 × 103.7 mm
- Net weight: 0.181 kg
- EAN: 4016779852210
Reliable Voltage Monitoring for Industrial Electrical Systems
Voltage monitoring relays such as the ABB CM-ESS.2S continuously supervise electrical voltage and respond when the measured value crosses a configured threshold. By detecting overvoltage or undervoltage conditions, the relay helps identify abnormal electrical supply conditions that could affect the performance, reliability or service life of connected equipment.
The CM-ESS.2S uses True RMS measurement to monitor AC and DC voltages across four selectable measuring ranges. Engineers can configure the monitoring function, voltage threshold, hysteresis and tripping delay to match the requirements of the monitored circuit. When the configured switching conditions are met, the relay changes the state of its output contacts, allowing connected control systems to activate alarms, initiate shutdown sequences or perform other protective actions.
The adjustable tripping delay allows engineers to select instantaneous operation or introduce a delay of up to 30 s, helping to avoid unnecessary switching caused by temporary voltage fluctuations. Adjustable hysteresis further improves operational stability by reducing repeated switching when the monitored voltage remains close to the configured threshold.
Its two changeover contacts provide flexible integration with PLC inputs, contactor control circuits and industrial alarm systems. The compact DIN rail housing, front-mounted controls, three LED status indicators and screw terminal connections make the CM-ESS.2S a practical solution for voltage supervision in industrial automation and electrical distribution installations.
Typical Applications
- Industrial single-phase voltage monitoring and supervision.
- Overvoltage and undervoltage detection in electrical control circuits.
- AC and DC voltage monitoring in industrial equipment.
- Electrical supply monitoring for machinery and automation systems.
- Voltage supervision in control panels and distribution cabinets.
- PLC-based monitoring and alarm signalling applications.
- Power supply condition monitoring for industrial control equipment.
- Voltage fault detection in manufacturing and production machinery.
- Monitoring of electrical supplies in pumps, fans and processing equipment.
- OEM machine building and automated control systems.
Technical Specifications
Tick the specs you need, then view products that match.
| Monitoring Function | Voltage | |
|---|---|---|
| Monitored Supply | Single-phase | |
| Signal / Input Range | 3–30 V | |
| Time Delay | Adjustable |
Frequently Asked Questions
What is the ABB CM-ESS.2S used for?
The ABB CM-ESS.2S is a single-phase voltage monitoring relay used to detect overvoltage and undervoltage conditions in industrial electrical systems. It monitors AC or DC voltage and switches its output contacts when the configured threshold and timing conditions are met.
What supply voltage does the ABB CM-ESS.2S require?
The CM-ESS.2S, order code 1SVR730831R1400, requires a rated control supply voltage of 220–240 V AC. This is the supply voltage for the relay itself and is separate from its selectable voltage measuring ranges.
What voltage measuring ranges are available?
The relay provides four selectable voltage measuring ranges: 3–30 V, 6–60 V, 30–300 V and 60–600 V. These ranges allow the device to monitor different AC and DC voltage levels.
Can the CM-ESS.2S monitor both overvoltage and undervoltage?
Yes. The relay can be configured for either overvoltage or undervoltage monitoring. It also provides adjustable hysteresis from 3–30% of the threshold value and an adjustable tripping delay to help prevent unwanted switching caused by temporary voltage fluctuations.
What is the adjustable tripping delay range?
The ABB CM-ESS.2S provides an instantaneous 0 s setting or an adjustable tripping delay from 0.1–30 s. This allows the relay response to be configured according to the requirements of the monitored electrical circuit.
How many output contacts does the relay have?
The ABB CM-ESS.2S features two changeover (SPDT) output contacts rated at 250 V / 4 A. These contacts can be connected to industrial control circuits, alarm systems, contactors or PLC inputs.
Does the ABB CM-ESS.2S measure AC and DC voltage?
Yes. The CM-ESS.2S uses a True RMS measuring principle and supports monitoring of both AC and DC voltages within its specified measuring ranges. The relay itself requires a separate 220–240 V AC control supply.
What is the protection rating of the CM-ESS.2S?
The relay features an IP50 housing protection rating and IP20 terminal protection rating. It is designed for installation inside suitable electrical control panels and cabinets.
Where is the ABB CM-ESS.2S typically installed?
The relay is designed for DIN rail mounting inside electrical control panels, automation cabinets and distribution enclosures. Its compact 22.5 mm width helps minimise the space required in industrial installations.
Trusted by Industrial Automation Professionals Worldwide
ABB CM-ESS.2 voltage monitoring relays provide dependable voltage supervision for industrial automation, electrical control and equipment monitoring applications. With configurable overvoltage and undervoltage functions, four selectable measuring ranges, True RMS measurement, adjustable tripping delay and two changeover contacts, the CM-ESS.2S offers a reliable solution for detecting abnormal voltage conditions and supporting efficient industrial equipment operation.
