Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB CM-PBE (1SVR550881R9400) is a phase loss monitoring relay with neutral monitoring for 380–440 V AC phase-to-phase and 220–240 V AC phase-to-neutral supplies, featuring a normally open output contact, fixed phase failure detection threshold and automatic recovery for industrial electrical control systems.
£50.26
The ABB CM-PBE (1SVR550881R9400) is a compact and dependable phase loss monitoring relay with neutral monitoring, designed to supervise electrical supplies in industrial control and automation systems. Part of the ABB CM-PBE monitoring relay range, this version detects phase failure in three-phase networks and supports neutral monitoring, helping protect equipment against abnormal supply conditions.
Designed for 380–440 V AC phase-to-phase and 220–240 V AC phase-to-neutral electrical systems, the CM-PBE monitors the connected supply and provides a switching signal when a significant voltage loss is detected. Its fixed monitoring threshold and automatic reset behaviour make it a practical solution for motor starter circuits, electrical distribution panels and industrial machinery.
The relay is powered directly by the monitored circuit, eliminating the need for a separate auxiliary supply. With one normally open output contact, a yellow relay status LED and a compact 22.5 mm DIN rail-mounted housing, the ABB CM-PBE provides straightforward installation and reliable supply supervision for compatible single-phase and three-phase applications.
Industrial motors and electrical control systems depend on the availability of their intended supply conductors for dependable operation. A missing phase can reduce motor torque, increase current in the remaining windings and lead to overheating or equipment shutdown. The ABB CM-PBE phase loss monitoring relay provides a practical means of detecting significant supply loss and signalling the associated control system.
This version of the CM-PBE monitors L1, L2, L3 and neutral in compatible three-phase electrical networks. When the required supply conditions are present, the output relay energises after its fixed start-up delay and the yellow LED indicates the energised state. If a phase failure is detected, the relay releases after its fixed tripping delay, allowing the connected control circuit to respond.
The CM-PBE uses a phase failure threshold of approximately 60% of nominal voltage. It is intended to detect significant voltage loss rather than provide adjustable precision overvoltage or undervoltage supervision. The relay does not monitor phase sequence, so applications requiring detection of incorrect phase rotation should use an appropriate phase sequence monitoring device.
The neutral-monitoring version, ABB order code 1SVR550881R9400, also supports suitable single-phase supply monitoring. For this application, ABB specifies that the three phase input terminals are linked together and connected to the monitored phase conductor, with the neutral connected to its designated terminal. Installation must follow the applicable ABB connection diagram.
Its closed-circuit operating principle enables the normally open output contact to remain closed while the relay is energised under acceptable supply conditions. When a monitored fault causes the relay to de-energise, the contact opens. This signal can be incorporated into a motor starter, contactor control circuit or automation system to initiate a protective response. The relay is a monitoring device and does not directly interrupt the main supply to a motor.
Tick the specs you need, then view products that match.
| Monitoring Function | Three-phase supply | |
|---|---|---|
| Monitored Supply | Three-phase + N | |
| Time Delay | Fixed | |
| Reset Type | Automatic |
The ABB CM-PBE 1SVR550881R9400 is a phase loss monitoring relay with neutral monitoring. It supervises compatible electrical supplies and provides a relay output signal when a significant phase failure is detected, helping protect industrial motors and electrical control systems.
This CM-PBE version supports 380–440 V AC phase-to-phase and 220–240 V AC phase-to-neutral supply monitoring at 50/60 Hz. The monitored supply also powers the relay, so a separate auxiliary supply is not required.
Yes. ABB order code 1SVR550881R9400 is the CM-PBE version with neutral monitoring. It uses the L1, L2, L3 and N connections to supervise compatible three-phase electrical networks. The alternative CM-PBE version without neutral monitoring has a different ABB order code.
Yes. The CM-PBE version with neutral monitoring can also monitor suitable single-phase supplies. ABB specifies that the L1, L2 and L3 input terminals must be linked together and connected to the monitored phase, with the neutral connected to the designated N terminal. Wiring must follow the manufacturer's installation instructions.
The relay provides one normally open contact rated at 250 V AC / 4 A. It operates with a fixed 500 ms start-up delay and a fixed 150 ms tripping delay. Under acceptable supply conditions, the relay energises and closes its output contact; when a monitored fault occurs, the output contact opens after the tripping delay.
ABB CM-PBE phase monitoring relays provide dependable supply supervision for industrial electrical installations. Combining phase failure detection, neutral monitoring, automatic recovery and compact DIN rail installation, the CM-PBE 1SVR550881R9400 supports reliable operation of industrial motors, electrical distribution systems and automation equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.