Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Lovato DMED332 is a four-module three-phase energy meter for systems with or without neutral, featuring CT /5 A or /1 A current measurement, Class 0.5s active energy accuracy and integrated M-Bus communication.
£269.35
The Lovato DMED332 is a high-accuracy three-phase energy meter designed for electrical energy monitoring in three-phase systems with or without a neutral conductor. It uses external current transformers with 5 A or 1 A secondary outputs, making it particularly suitable for metering higher-current installations where direct-connected meters are unsuitable.
The DMED332 measures imported and exported active energy together with imported and exported reactive energy. Active energy measurement achieves Class 0.5s accuracy according to IEC/EN 62053-22, while reactive energy is measured to Class 2 according to IEC/EN 62053-23, providing dependable data for industrial energy monitoring and sub-metering applications.
An integrated M-Bus communication interface allows measured energy data to be incorporated into compatible building management, energy monitoring and supervisory systems. The non-expandable meter occupies only 4 DIN modules and supports phase-to-phase voltages of 380–415 V AC and phase-to-neutral voltages of 220–240 V AC.
CT-connected energy meters such as the Lovato DMED332 allow electrical consumption to be monitored in installations where load current exceeds the practical limits of direct-connected meters. External current transformers reproduce the primary circuit current at a standard 5 A or 1 A secondary level, allowing the meter to accurately calculate electrical energy while remaining isolated from the full load current.
The integrated M-Bus interface allows the DMED332 to communicate energy data to compatible monitoring and management systems. Combined with measurement of imported and exported active and reactive energy, this makes the meter suitable for industrial energy management, building services, renewable energy systems and detailed sub-metering applications.
Tick the specs you need, then view products that match.
| Measurement Connection Type | CT connection | |
|---|---|---|
| Measurement Functions | Energy | |
| Device Type | Energy meter | |
| Phase | Three Phase | |
| Signal / Input Range | CT input (/5 A or /1 A) | |
| Communication | M-Bus | |
| Manufacturer | Lovato Electric | |
| Series | DMED | |
| Model | DMED332 | |
| Product type | Three-phase energy meter | |
| Electrical system | Three-phase with or without neutral | |
| Installation | DIN rail mounting | |
| DIN rail modules | 4 | |
| Current connection | External CT | |
| Supported CT secondary | 5 A / 1 A | |
| IEC maximum current Imax | 5 A | |
| IEC rated current Iref | 5 A | |
| IEC minimum current Imin | 0.05 A | |
| Transition current Itr | 0.25 A | |
| Starting current Ist | 0.005 mA | |
| Rated phase-to-phase voltage | 380–415 V AC | |
| Phase-to-phase operating range | 323–456 V AC | |
| Rated phase-to-neutral voltage | 220–240 V AC | |
| Phase-to-neutral operating range | 187–264 V AC | |
| Operational frequency | 50–60 Hz | |
| Maximum power consumption | 3.5 VA | |
| Maximum power dissipation | 2.7 W | |
| Active energy measurement | Imported and exported | |
| Reactive energy measurement | Imported and exported | |
| Active energy accuracy | Class 0.5s according to IEC/EN 62053-22 | |
| Reactive energy accuracy | Class 2 according to IEC/EN 62053-23 | |
| Built-in communication | M-Bus | |
| LED pulse rate | 1000 pulses/kWh | |
| LED pulse duration | 30 ms | |
| Rated insulation voltage Ui | 250 V | |
| Rated impulse withstand voltage Uimp | 6 kV | |
| Operating frequency withstand voltage | 4 kV | |
| Housing material | Polyamide | |
| Terminal type | Fixed | |
| Supply voltage measurement conductor section | 0.2–4 mm² | |
| Current measurement conductor section | up to 2.5 mm² | |
| Conductor range | AWG 24–12 | |
| Maximum terminal tightening torque | 0.8 Nm | |
| Expandable | No | |
| MID certified | No | |
| Current harmonic analysis | No | |
| Compliance | IEC/EN 50470-1, IEC/EN 61010-1, IEC/EN 61010-2-030 | |
| Certifications | EAC, RCM | |
| ETIM 8.0 classification | EC001506 - Kilowatt-hour meter | |
| EAN13 | 8013975230688 | |
| HS code | 90283019 |
The DMED332 is designed for three-phase electrical systems with or without neutral and uses external current transformers for current measurement.
The Lovato DMED332 supports current-transformer connections with 5 A or 1 A secondary currents, allowing it to monitor higher-current circuits through appropriately selected external CTs.
The DMED332 measures imported and exported active energy as well as imported and exported reactive energy.
The Lovato DMED332 has an integrated M-Bus communication interface for connection to compatible energy-monitoring, building-management and supervisory systems.
No. The standard DMED332 is not MID certified. It provides Class 0.5s active energy accuracy according to IEC/EN 62053-22 and Class 2 reactive energy accuracy according to IEC/EN 62053-23.
Lovato Electric DMED energy meters provide accurate and dependable electrical energy measurement for industrial facilities, commercial buildings, distribution systems and professional energy-management applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.