Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
51C11 Lovato GSM MODEM-4PX1 CONVERTER CABLE
Lovato 51C11 is a 2.8 m PC-to-DCRK communication cable with integrated isolated RS232/TTL conversion for setup, testing and diagnostics of compatible Lovato DCRK controllers.
£232.08
Why Choose the Lovato 51C11 PC-DCRK Communication Cable?
The Lovato 51C11 is a dedicated PC-to-DCRK communication and programming cable designed for connecting compatible Lovato DCRK automatic power factor controllers to a computer. As part of the Lovato Electric expansion modules and accessories range, it provides the signal conversion required for configuration, testing and diagnostic communication between a PC serial interface and the controller.
The 51C11 incorporates an RS232/TTL isolated converter, converting the TTL signals available at the DCRK controller's rear communication connector into an isolated RS232 signal suitable for connection to a PC. This enables compatible Lovato software to communicate directly with the controller during commissioning, parameter adjustment, automatic testing and diagnostic work.
With a cable length of approximately 2.8 m, the 51C11 provides convenient temporary connection between a computer and compatible DCRK equipment. The controller end uses an RJ6 telephone-style connector, while the computer connection uses a DB9 serial connector. It is intended primarily for setup, testing and diagnostics rather than permanent serial communication.
Key Advantages
- Purpose-designed PC-to-DCRK communication cable for compatible Lovato controllers.
- Integrated RS232/TTL signal conversion for direct communication with a PC serial port.
- Provides isolated RS232 communication between the controller and computer.
- 2.8 m cable length provides convenient access during commissioning and maintenance.
- Supports controller setup, testing and diagnostic operations.
- Designed specifically for use with compatible Lovato DCRK automatic power factor controllers.
Key Features
- Lovato Electric communication accessory.
- PC-to-DCRK connection cable.
- Integrated TTL/RS232 isolated converter.
- 2.8 m cable length.
- DB9 serial connector for PC connection.
- RJ6 telephone-style connector for connection to the DCRK controller.
- Designed for configuration and diagnostic communication.
- Suitable for use with compatible Lovato DCRK setup and automatic test software.
Reliable PC Communication for Lovato DCRK Controllers
The Lovato 51C11 provides the interface required to connect compatible DCRK automatic power factor controllers to a computer for configuration and diagnostic tasks. The integrated converter translates the controller's TTL-level signals into isolated RS232 communication, allowing compatible software running on the PC to exchange information with the controller.
This connection is particularly useful during commissioning and maintenance, allowing engineers to access controller measurements, configure operating parameters, perform tests and diagnose system behaviour. The 51C11 is intended as a temporary service and programming connection rather than a permanent serial communications link.
Typical Applications
- Lovato DCRK power factor controller configuration.
- PC-based controller commissioning and setup.
- Automatic power factor correction system testing.
- Controller parameter adjustment.
- Maintenance and diagnostic communication.
- Temporary RS232 communication with compatible DCRK controllers.
Technical Specifications
| HS Code | 85389091 |
|---|---|
| Manufacturer | Lovato Electric |
| Family | Expansion Modules / Accessories |
| Model | 51C11 |
| Product type | PC-DCRK communication and converter cable |
| Application | PC connection to compatible DCRK controllers |
| Signal conversion | TTL / RS232 |
| PC interface | RS232 |
| PC connector | DB9 serial connector |
| Controller connector | RJ6 telephone-style connector |
| Cable length | 2.8 m |
| Communication isolation | Isolated RS232 conversion |
| Intended use | Setup, testing and diagnostics |
| EAN | 8013975112694 |
Frequently Asked Questions
What is the Lovato 51C11 used for?
The Lovato 51C11 is used to connect a PC to compatible Lovato DCRK automatic power factor controllers for setup, testing, configuration and diagnostic operations.
What type of signal conversion does the 51C11 provide?
The cable incorporates an RS232/TTL isolated converter, allowing the TTL communication signals from a compatible DCRK controller to communicate with an RS232 PC serial interface.
How long is the Lovato 51C11 cable?
The Lovato 51C11 has a cable length of approximately 2.8 m, providing convenient reach between the controller and computer during setup and maintenance.
What connectors are used on the 51C11?
The controller end uses an RJ6 telephone-style connector, while the PC end uses a DB9 serial connector for an RS232 connection.
Is the Lovato 51C11 intended for permanent communication?
No. The 51C11 connection is primarily intended for setting, testing and diagnostic operations and is not designed as a permanent serial communications connection.
Purpose-Built Connectivity for Lovato Control Equipment
Lovato 51C11 provides a dedicated isolated communication interface for compatible DCRK automatic power factor controllers, supporting efficient PC-based configuration, commissioning, testing and diagnostics.
