Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
2CMA268125R1000 ABB INS-LTE 4G LTE Connectivity Module for SCU200
ABB INS-LTE is a compact 4G LTE connectivity module for SCU200 and SCU200-W InSite energy-management systems, featuring Micro SIM support, European LTE-FDD bands, external antenna connectivity and 24 V DC power via the InSite modular bus.
£123.90
Why Choose the ABB INS-LTE 4G LTE Connectivity Module?
The ABB INS-LTE is a compact 4G LTE connectivity module designed to extend the communication capabilities of the ABB InSite energy-management system. Installed alongside a compatible SCU200 or SCU200-W control unit, it provides cellular connectivity for remote energy-management applications where a conventional wired network connection may not be available or preferred.
The module communicates using LTE/4G and accepts a Micro SIM (3FF). It supports LTE-FDD frequency bands B1, B3, B5, B7, B8 and B20 for European deployments and is designed to connect ABB InSite installations to services such as ABB Ability InSite Energy Pro through cellular networks.
Powered directly through the InSite modular bus at 24 V DC, the INS-LTE requires no separate module-level power connection when incorporated into a correctly configured system. Its compact 17.5 mm DIN-rail format, external antenna connection and direct integration with the SCU200 architecture make it a practical communications upgrade. ABB order code 2CMA268125R1000 identifies this dedicated InSite LTE module.
Key Advantages
- Adds LTE/4G cellular connectivity to compatible ABB InSite installations.
- Designed for direct integration with ABB SCU200 and SCU200-W control units.
- Supports a standard Micro SIM (3FF) for cellular network access.
- Powered at 24 V DC through the InSite modular bus, simplifying system wiring.
- External antenna connection supports flexible antenna positioning within suitable installations.
- Compact 17.5 mm single-module DIN-rail format minimises distribution-board space requirements.
Key Features
- ABB InSite LTE connectivity expansion module.
- LTE/4G communication protocol.
- Micro SIM (3FF) card format.
- LTE-FDD bands B1/B3/B5/B7/B8/B20.
- Maximum RF output power of 23 dBm.
- 24 V DC supply via the InSite modular bus.
- Power consumption of 0.24 W in idle mode.
- External antenna interface using male SMA, 50 Ω.
- Antenna frequency range of 0.8–2.6 GHz.
- Designed for indoor use in Europe and the UK.
Cellular Connectivity for ABB InSite Energy Management
The INS-LTE enables compatible ABB InSite installations to communicate over cellular networks, providing an alternative communications path where fixed Ethernet infrastructure is unavailable or impractical. This can support remote monitoring of energy data and connected assets across commercial, industrial and distributed electrical installations.
Direct integration with the SCU200 architecture keeps the solution compact and modular. The module receives power through the InSite modular bus, provides clear LED status indication and uses an external antenna for cellular communication, allowing the communications hardware to be incorporated efficiently into the wider InSite system.
Typical Applications
- ABB InSite energy-management systems.
- ABB SCU200 and SCU200-W installations.
- Remote energy and load monitoring.
- Cellular connectivity for distribution boards.
- Commercial building energy management.
- Industrial electrical monitoring.
- Distributed sites without convenient wired network infrastructure.
- Connectivity to compatible ABB cloud-based energy-management services.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | I/O / communication module | |
|---|---|---|
| Product family | InSite Energy Management System | |
| ABB order code | 2CMA268125R1000 | |
| Product type | LTE/4G connectivity module | |
| Product group | Energy Monitoring Systems | |
| Control unit compatibility | SCU200 / SCU200-W | |
| Supply voltage | 24 V DC via InSite modular bus | |
| System connection | InSite modular bus | |
| Power consumption | 0.24 W in idle mode | |
| Communication protocol | LTE/4G | |
| SIM format | Micro SIM (3FF) | |
| Frequency bands | LTE-FDD B1/B3/B5/B7/B8/B20 | |
| Maximum RF output power | 23 dBm | |
| External antenna connection | Male SMA / 50 Ω | |
| Antenna frequency range | 0.8–2.6 GHz | |
| Maximum antenna extension cable | <3 m | |
| ABB antenna | 2CMA269075R1000 | |
| Mounting method | 35 mm DIN rail | |
| Module width | 1 module / 17.5 mm | |
| Degree of protection | IP20 | |
| Dimensions (W × H × D) | 17.5 × 87 × 64.9 mm | |
| Weight | approx. 70 g | |
| Operating temperature | -25 to +60 °C | |
| Storage temperature | -40 to +85 °C | |
| Operating altitude | 0–2000 m | |
| Market region | Europe / UK | |
| Installation environment | Indoor use | |
| Standards | EN 61010-1 / IEC 61010-1, EN IEC 61326-1, ETSI EN 300-489-52, ETSI EN 301-908-1 |
Frequently Asked Questions
What is the ABB INS-LTE used for?
The ABB INS-LTE is a 4G LTE connectivity module for the InSite energy-management system, allowing compatible SCU200 and SCU200-W installations to communicate through supported cellular networks.
Which SIM card does the ABB INS-LTE use?
The INS-LTE accepts a Micro SIM (3FF) and supports LTE-FDD bands B1, B3, B5, B7, B8 and B20.
Does the INS-LTE require a separate power supply?
The module operates from 24 V DC supplied through the InSite modular bus, with the InSite system providing its required power as part of the configured SCU200 installation.
Does the ABB INS-LTE require an external antenna?
Yes. The INS-LTE has no internal antenna and uses an external antenna with a male SMA, 50 Ω connection; ABB identifies antenna order code 2CMA269075R1000 for the module.
Where can the ABB INS-LTE be used?
The INS-LTE is specified for indoor applications in Europe and the UK and is designed for integration with compatible ABB InSite SCU200 or SCU200-W energy-management installations.
Trusted Cellular Connectivity from ABB
ABB InSite connectivity modules extend energy-management capabilities beyond local networks, enabling compatible monitoring systems to communicate over cellular infrastructure while retaining the compact modular architecture of the SCU200 platform.
