NVENT HOFFMAN PAC06 Front panel, 267×470

Why Choose the nVent HOFFMAN PAC06 Front Panel?

The nVent HOFFMAN PAC06 is a durable plain 19-inch painted steel front panel designed for compatible industrial enclosure, swing-frame and profile systems. Part of the nVent HOFFMAN PAC front panel range, it provides a practical way to cover unused sections of 19-inch mounting space while maintaining a neat and professional enclosure appearance.

Manufactured from 1.5 mm mild steel and finished in RAL 7035 light grey, the PAC06 is designed to match compatible nVent HOFFMAN enclosures. The plain panel can reserve rack space for future equipment or be machined with suitable openings to accommodate equipment that does not use a standard 19-inch mounting format.

With a nominal panel format of 267 × 470 mm, an approximate height of 266.7 mm, width of 470 mm and depth of 12 mm, the PAC06 occupies 6U of vertical rack space. Its large blank surface makes it particularly useful for covering substantial unused rack areas or creating customised equipment mounting arrangements within industrial electrical enclosures.

Key Advantages

• Purpose-designed plain 19-inch front panel for industrial enclosure systems.
• 6U rack height covers a substantial section of 19-inch mounting space.
• Provides a neat solution for covering unused sections of swing frames or mounting profiles.
• Can be machined for customised equipment mounting when required.
• Manufactured from durable 1.5 mm mild steel.
• RAL 7035 light-grey finish complements compatible nVent HOFFMAN enclosures.
• Allows rack space to be reserved for future equipment while maintaining enclosure aesthetics.
• Suitable for industrial automation, control, instrumentation and electrical installations.

Key Features

• nVent HOFFMAN PAC Series front panel.
• Plain 19-inch panel design.
• Nominal 267 × 470 mm panel format.
• 266.7 mm nominal rack height.
• 470 mm width.
• 12 mm depth.
• 6U rack height.
• Manufactured from 1.5 mm mild steel.
• RAL 7035 light-grey painted finish.
• Suitable for covering empty sections of 19-inch swing frames and profiles.
• Can be machined for equipment that is not designed for standard 19-inch mounting.
• Supplied as one front panel.
• Non-EMC-specific version.

Practical 6U Front Panel for 19-Inch Enclosure Systems

Front panels provide an effective way to cover unused sections of 19-inch swing frames and mounting profiles, helping create an organised and professional enclosure installation. The nVent HOFFMAN PAC06 provides 6U of coverage and can reserve valuable rack space for future expansion without leaving a large open section at the front of the enclosure.

The plain steel surface also provides flexibility for customised installations. Where equipment cannot be mounted directly using a standard 19-inch format, the PAC06 can be suitably machined to accommodate controls, instrumentation, interfaces and other electrical or electronic equipment.

Typical Applications

• 19-inch industrial enclosure systems.
• 19-inch swing frames and mounting profiles.
• Electrical and electronic control cabinets.
• Industrial automation enclosures.
• Factory automation and process control systems.
• Blanking unused 6U rack positions.
• Reserving enclosure space for future equipment.
• Custom mounting of non-19-inch equipment.
• Control, instrumentation and communications installations.