Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1SKH022001C0001 ABB Protecta Home 22 Module Surface-Mounted Electrical Distribution Enclosure
ABB Protecta Home 1SKH022001C0001 is a 22-module surface-mounted electrical distribution enclosure designed to house compatible modular circuit protection and control equipment in residential and building electrical installations.
£65.81
Why Choose the ABB Protecta Home 22 Module Surface-Mounted Enclosure?
The ABB Protecta Home 22 Module Surface-Mounted Enclosure, manufacturer order code 1SKH022001C0001, is a residential electrical distribution enclosure from ABB's established Protecta Home range. Designed to accommodate up to 22 modular positions, it provides a practical housing solution for compatible low-voltage circuit protection and control equipment.
Identified as Protecta Home 22 Mod SM, this enclosure is intended for surface-mounted installation, making it suitable for applications where the distribution board is mounted directly onto a wall rather than recessed into the building structure. This arrangement is particularly useful for refurbishment projects, accessible electrical service areas and installations where flush mounting is impractical.
The ABB Protecta Home range is developed for residential and building electrical distribution applications, providing enclosure solutions for modular protective devices such as miniature circuit breakers (MCBs), residual current devices (RCDs), residual current circuit breakers with overcurrent protection (RCBOs) and compatible control accessories. The precise device combination depends on the enclosure's approved internal arrangement and available modular space.
With its 22-module capacity, the ABB 1SKH022001C0001 provides room for a range of appropriately selected modular devices. Its manufacturer-specific construction supports coordinated installation using suitable ABB distribution equipment, helping electricians create organised and maintainable electrical assemblies.
Key Advantages
- 22-module capacity: Provides space for up to 22 compatible modular device positions.
- Surface-mounted design: Suitable for installation directly onto an appropriate wall or mounting surface.
- Genuine ABB enclosure: Part of the established Protecta Home electrical distribution range.
- Residential distribution applications: Designed for housing compatible low-voltage electrical protection equipment.
- Flexible device configuration: Supports appropriately selected modular circuit protection and control devices.
- Suitable for refurbishment: Surface mounting can simplify installations where recessed enclosure space is unavailable.
- Organised equipment housing: Provides a defined location for modular electrical distribution components.
- Professional installation: Suitable for qualified electricians and electrical panel assemblers.
- Accessible mounting arrangement: Supports practical positioning in suitable indoor electrical service areas.
- Coordinated ABB system: Can be specified alongside compatible ABB protective devices and enclosure accessories.
- Practical circuit planning: Offers modular space for installations requiring multiple outgoing circuits.
- Clear manufacturer identification: Order code 1SKH022001C0001 supports accurate specification and replacement.
- Building services versatility: Suitable for residential and compatible light-commercial distribution applications.
Key Features
- Manufacturer: ABB.
- Product range: Protecta Home.
- Product designation: PH.
- ABB order code: 1SKH022001C0001.
- Manufacturer description: Protecta Home 22 Mod SM.
- Product type: Modular electrical distribution enclosure.
- Mounting configuration: Surface mounted.
- Modular capacity: 22 modules.
- Primary application: Low-voltage electrical distribution.
- Installation category: Residential and building electrical installations.
- Device application: Compatible modular circuit protection and control equipment.
- Mounting location: Suitable wall-mounted installation.
- Enclosure system: ABB Protecta Home.
- Installation method: Fixed surface mounting.
- Product identification: ABB manufacturer order code and Protecta Home designation.
- Application flexibility: New installations, distribution board upgrades and suitable replacement projects.
Reliable Surface-Mounted Electrical Distribution for Residential Installations
The ABB Protecta Home 22-module surface-mounted enclosure provides a dedicated housing arrangement for modular electrical distribution equipment. Its 22-module format allows electricians to plan the installation of appropriately selected protective and control devices within a single enclosure, helping create a structured electrical distribution point.
Surface mounting is particularly useful where the building structure does not permit a recessed consumer unit or where a distribution enclosure must remain accessible for installation and maintenance. The enclosure can be positioned on a suitable wall or mounting surface, subject to the manufacturer's fixing requirements and the applicable installation regulations.
The 22-module capacity supports a variety of possible device arrangements. For example, compatible modular equipment may include MCBs, RCBOs, RCDs, isolating devices and selected control accessories. The number of usable outgoing circuits depends on the width of the installed devices and the space required for the incoming supply and associated components.
Correct internal configuration is essential when assembling an electrical distribution board. Installers must select appropriate protective devices, conductor termination arrangements, busbars and accessories for the specific enclosure and circuit design. Module capacity alone does not determine the enclosure's permissible current rating or the number of circuits that can be safely connected.
The ABB Protecta Home range is associated with residential electrical distribution equipment designed for straightforward installation and servicing. Using compatible ABB components helps maintain a coordinated assembly, but the suitability of each component must be established from its technical documentation and the requirements of the complete installation.
For electrical safety, the enclosure must be installed by a competent person in accordance with applicable regulations, including BS 7671 where relevant in the United Kingdom. The completed assembly must maintain suitable protection against electric shock, adequate cable entry arrangements, correct conductor segregation and the required accessibility for operation and maintenance.
Where the enclosure is intended for use as a consumer unit in a domestic installation, the installer must also confirm that its construction and assembled configuration meet the applicable requirements for that location. The ABB 1SKH022001C0001 should not be assumed to include a particular main switch, protective device arrangement or additional accessory unless those items are explicitly confirmed in the supply specification.
Typical Applications
- Residential electrical distribution installations.
- Surface-mounted consumer unit arrangements.
- Domestic electrical installation upgrades.
- Apartment and flat electrical distribution systems.
- Building refurbishment and renovation projects.
- Wall-mounted modular circuit protection assemblies.
- Compatible light-commercial electrical distribution installations.
- Electrical service cupboards and designated equipment areas.
- Distribution boards containing multiple outgoing circuits.
- Housing compatible MCBs, RCDs and RCBOs.
- Building services electrical installations.
- Replacement of matching ABB Protecta Home enclosures.
- Professional electrical contracting and panel assembly.
Technical Specifications
Tick the specs you need, then view products that match.
| Module Capacity | 22 modules | |
|---|---|---|
| Device Type | Enclosure / Cabinet | |
| Product Series | ABB Protecta Home | |
| Product group | Protecta Home | |
| Product range | Protecta Home | |
| Product designation | PH | |
| ABB manufacturer order code | 1SKH022001C0001 | |
| Manufacturer description | Protecta Home 22 Mod SM | |
| Product category | Electrical distribution enclosures | |
| Enclosure type | Modular distribution enclosure | |
| Mounting type | Surface mounted | |
| Module capacity | 22 modules | |
| Nominal module system | Modular DIN-rail electrical equipment | |
| Primary application | Low-voltage electrical distribution | |
| Installation application | Residential and building electrical installations | |
| Compatible equipment category | Approved modular circuit protection and control devices | |
| Order reference | 1SKH022001C0001 |
Frequently Asked Questions
What is the ABB Protecta Home 22 Mod SM?
The ABB Protecta Home 22 Mod SM is a surface-mounted modular electrical distribution enclosure with a capacity of 22 module positions, designed for compatible low-voltage electrical protection and control equipment.
What is the ABB order code for the Protecta Home 22-module enclosure?
The ABB manufacturer order code is 1SKH022001C0001. The product is identified as PH – Protecta Home 22 Mod SM.
What does SM mean in Protecta Home 22 Mod SM?
SM means surface mounted. The enclosure is intended to be installed onto a suitable mounting surface rather than recessed into the wall.
How many modules does the ABB Protecta Home enclosure accommodate?
This model has a nominal capacity of 22 modular positions. The actual number of outgoing circuits depends on the module widths and arrangement of the installed protective devices.
Can the ABB Protecta Home 22-module enclosure house MCBs?
The enclosure is intended for compatible modular electrical distribution equipment, including appropriately selected miniature circuit breakers (MCBs). The specific device range and mounting arrangement must be confirmed before installation.
Can RCBOs and RCDs be installed in the ABB Protecta Home enclosure?
Compatible RCBOs and RCDs may be incorporated into a correctly designed modular distribution assembly. The installer must verify device dimensions, electrical ratings, busbar compatibility and available module space.
Is the ABB Protecta Home 22 Mod SM suitable for residential installations?
Yes. The Protecta Home range is intended for residential electrical distribution applications. The completed assembly must comply with the relevant electrical installation requirements for its intended location.
Does the ABB Protecta Home 22 Mod SM require recessed wall space?
No. As a surface-mounted enclosure, it is designed for installation onto a suitable wall or supporting surface, making it useful where recessed installation is impractical.
Does the ABB 1SKH022001C0001 include circuit breakers?
The product is identified as a 22-module surface-mounted Protecta Home enclosure. The supplied specification does not establish that particular circuit breakers, RCDs, RCBOs or a main switch are included, so the supplied component list should be checked before ordering.
What is the difference between the 18-module and 22-module Protecta Home enclosures?
The main difference is the nominal modular capacity. An 18-module enclosure accommodates up to 18 module positions, while the 22-module version provides 22 positions for compatible modular equipment.
Can the ABB Protecta Home 22 Mod SM be used in commercial premises?
It may be suitable for certain light-commercial or building services applications where the electrical design and installation conditions are compatible with the enclosure. The applicable assembly ratings and installation requirements must be verified.
Is the ABB Protecta Home 22-module enclosure suitable for outdoor installation?
Outdoor suitability should not be assumed from the product description. The installer must verify the enclosure's applicable IP rating and environmental requirements before specifying it for exposed or damp locations.
What should be checked before installing the ABB Protecta Home 22 Mod SM?
Before installation, verify the mounting location, available module capacity, compatible protective devices, conductor routing, cable entries, enclosure protection rating and all applicable electrical safety requirements.
Trusted by Electrical Installers and Panel Builders
ABB Protecta Home enclosures provide practical solutions for residential and building electrical distribution. The 22-module surface-mounted model offers a convenient housing arrangement for compatible modular protective equipment, supporting organised circuit layouts, accessible installation and professional electrical assembly.
