Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
TS8802.165 Rittal Section for cable entry rear for W: 1600mm
Rittal TS 8802.165 is an extruded aluminium rear cable entry section set with PU foam cable clamping for 1,600 mm wide TS enclosures, providing IP55 protection when correctly installed.
£51.46 per pack of 4
Why Choose the Rittal TS 8802.165 Rear Section for Cable Entry?
The Rittal TS 8802.165 is a robust rear section for cable entry designed to seal cables where they enter through the base opening of industrial enclosures. Developed for 1,600 mm wide Rittal TS enclosures and compatible TP configurations, it mounts directly onto the base opening to provide an organised and effectively sealed cable entry solution.
The TS 8802.165 is particularly well suited to cables with identical cross-sections. When the mounting plate is installed in its rearmost position, cables can be routed directly towards the mounting plate without requiring large bending radii, helping simplify installation and improve cable management within the enclosure.
Manufactured from extruded aluminium, the section incorporates resilient PU foam cable clamp strips with a 30 × 25 mm cross-section. The complete cable entry arrangement provides an IP55 protection rating to IEC 60529 when correctly installed, making it suitable for demanding industrial control, automation and electrical distribution applications.
Key Advantages
- Designed for sealing cable entry directly at the enclosure base opening.
- Suitable for 1,600 mm wide Rittal TS enclosures.
- IP55 protection to IEC 60529 subject to correct mounting.
- Allows direct cable routing when the mounting plate is installed in the rearmost position.
- Particularly well suited to cables with identical cross-sections.
- Robust extruded aluminium construction with resilient PU foam cable clamping.
Key Features
- Rittal TS rear section for cable entry.
- Designed for direct mounting onto the enclosure base opening.
- Suitable for 1,600 mm wide TS enclosures.
- Compatible with applicable TS and TP enclosure systems.
- Extruded aluminium section construction.
- PU foam cable clamp strips.
- Cable clamp strip cross-section of 30 × 25 mm.
- Helps avoid large cable bending radii with a rear-positioned mounting plate.
- IP55 protection category when correctly installed.
- Supplied as plug-in sections including foam rubber cable clamp strips.
Efficient Rear Cable Entry for Large Industrial Enclosures
Effective cable entry management helps preserve enclosure protection while allowing power, control and signal cables to be routed efficiently towards installed equipment. The Rittal TS 8802.165 mounts directly onto the base opening, enabling cables to enter close to a mounting plate installed in its rearmost position and helping avoid unnecessarily large cable bends.
For enclosure widths from 1,000 mm, Rittal provides two base openings, and up to four cable entry sections may be fitted per enclosure. The TS 8802.165 is supplied in a pack of 4 pcs, making it particularly suitable for the dual base openings found in the specified 1,600 mm wide enclosure configuration.
Typical Applications
- Large industrial electrical control cabinets.
- Rittal TS enclosure cable entry systems.
- Applicable Rittal TP enclosure configurations.
- Machine building and industrial automation systems.
- Power, control and signal cable routing.
- Installations with mounting plates positioned at the rear of the enclosure.
Technical Specifications
| Manufacturer | Rittal |
|---|---|
| Series | TS |
| Model | TS 8802.165 |
| Product type | Rear section for cable entry |
| Suitable enclosure width | 1,600 mm |
| Suitable enclosure types | TS, TP |
| Application | Sealing cable entry at the enclosure base opening |
| Mounting | Directly onto the base opening, base tray and gland plate |
| Section material | Extruded aluminium |
| Cable clamp strip material | PU foam |
| Cable clamp strip cross-section | 30 × 25 mm |
| Protection rating | IP55 to IEC 60529 when correctly installed |
| Supply includes | Plug-in sections including foam rubber cable clamp strips |
| Pack quantity | 4 pcs |
| Net weight | 0.592 kg |
| Gross weight | 0.6 kg |
| Customs tariff number | 76042990 |
| ETIM 9 | EC002624 |
| ECLASS 8.0 | 27189265 |
Frequently Asked Questions
What is the Rittal TS 8802.165 used for?
The Rittal TS 8802.165 is used for sealing cable entry at the base opening of an industrial enclosure while allowing cables to be routed efficiently towards a rear-positioned mounting plate.
What enclosure width is the Rittal TS 8802.165 designed for?
The TS 8802.165 is designed for 1,600 mm wide Rittal TS enclosures and is also compatible with applicable TP enclosure configurations.
What protection rating does the TS 8802.165 provide?
The cable entry arrangement provides an IP55 protection rating to IEC 60529 when correctly mounted and installed.
What materials are used in the Rittal TS 8802.165?
The main sections are manufactured from extruded aluminium, while the cable clamp strips are made from PU foam with a cross-section of 30 × 25 mm.
How many cable entry sections are supplied with the TS 8802.165?
The Rittal TS 8802.165 is supplied as a pack of 4 pcs. Rittal specifies that enclosures from 1,000 mm wide have two base openings and may accommodate up to four sections.
Trusted Cable Management for Industrial Enclosures
Rittal TS cable entry accessories provide coordinated solutions for routing, supporting and sealing power, control and signal cables while helping maintain enclosure protection and efficient internal layouts in industrial automation and electrical control systems.
