Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
TS8802.065 Rittal Section for cable entry rear for W: 600mm
Rittal TS 8802.065 is an extruded aluminium rear cable entry section with a PU foam clamp strip for 600 mm wide TS enclosures, providing IP55 protection when correctly installed.
£18.77 per pack of 2
Why Choose the Rittal TS 8802.065 Rear Section for Cable Entry?
The Rittal TS 8802.065 is a robust rear section for cable entry designed to seal cables where they enter through the base opening of industrial enclosures. Developed for 600 mm wide Rittal TS enclosures and compatible TP configurations, it mounts directly onto the base opening to provide an organised and effectively sealed cable entry solution.
Unlike a centre cable entry section mounted on top of gland plates, the TS 8802.065 is positioned directly at the enclosure base opening. When the mounting plate is installed in its rearmost position, this arrangement allows cables to be routed directly towards the mounting plate without requiring unnecessarily large bending radii, helping simplify cable management inside the enclosure.
The section is manufactured from extruded aluminium and incorporates a PU foam cable clamp strip with a 30 × 25 mm cross-section. It is particularly well suited to cables with identical cross-sections and provides an IP55 protection rating to IEC 60529 when correctly mounted.
Key Advantages
- Designed for sealing cable entry directly at the enclosure base opening.
- Suitable for 600 mm wide Rittal TS enclosures.
- IP55 protection to IEC 60529 when correctly installed.
- Allows direct cable routing when the mounting plate is installed in the rearmost position.
- Particularly suitable for cables with identical cross-sections.
- Durable extruded aluminium construction with resilient PU foam cable clamping.
Key Features
- Rittal TS rear section for cable entry.
- Designed for direct mounting onto the base opening.
- Suitable for 600 mm enclosure width in TS applications.
- Compatible with applicable TS and TP enclosure systems.
- Extruded aluminium section construction.
- PU foam cable clamp strip.
- Cable clamp strip cross-section of 30 × 25 mm.
- Helps minimise cable bending radii when using a rear-mounted mounting plate.
- IP55 protection category when correctly installed.
- Supplied as plug-in sections complete with foam rubber clamp strips.
Efficient Rear Cable Entry for Industrial Enclosures
Effective cable entry management helps maintain enclosure protection while ensuring power, control and signal cables can be routed cleanly towards installed equipment. The Rittal TS 8802.065 mounts directly onto the base opening, allowing cables to enter close to a mounting plate installed in its rearmost position and helping avoid unnecessarily large cable bends.
The combination of a rigid extruded aluminium section and resilient PU foam clamp strip provides secure support and sealing around inserted cables. Two sections are sufficient for one base opening on an enclosure up to 800 mm wide. From an enclosure width of 1,000 mm, two base openings are provided and up to four sections may be fitted.
Typical Applications
- Industrial electrical control cabinets.
- Rittal TS enclosure cable entry systems.
- Applicable Rittal TP enclosure configurations.
- Machine building and industrial automation systems.
- Power, control and signal cable routing.
- Installations with mounting plates positioned at the rear of the enclosure.
Technical Specifications
| Manufacturer | Rittal |
|---|---|
| Series | TS |
| Model | TS 8802.065 |
| Product type | Rear section for cable entry |
| Suitable enclosure width | 600 mm |
| Suitable enclosure types | TS, TP |
| Application | Sealing cable entry at the enclosure base opening |
| Mounting | Directly onto the base opening / base tray and gland plate |
| Section material | Extruded aluminium |
| Cable clamp strip material | PU foam |
| Cable clamp strip cross-section | 30 × 25 mm |
| Protection rating | IP55 to IEC 60529 when correctly installed |
| Supply includes | Plug-in sections including foam rubber clamp strips |
| Pack quantity | 2 pcs |
| Net weight | 0.208 kg |
| Gross weight | 0.21 kg |
| EAN | 4028177496354 |
| Customs tariff number | 76042990 |
| ETIM 9 | EC002624 |
| ECLASS 8.0 | 27189265 |
Frequently Asked Questions
What is the Rittal TS 8802.065 used for?
The Rittal TS 8802.065 is used for sealing cable entry at the base opening of an industrial enclosure while allowing cables to be routed efficiently towards the mounting plate.
What enclosure width is the Rittal TS 8802.065 designed for?
The TS 8802.065 is designed for 600 mm wide Rittal TS enclosures and is also suitable for applicable TP enclosure configurations.
What protection rating does the TS 8802.065 provide?
The cable entry section provides an IP55 protection rating to IEC 60529 when correctly installed.
What materials are used in the Rittal TS 8802.065?
The main section is manufactured from extruded aluminium, while the cable clamp strip is made from PU foam with a cross-section of 30 × 25 mm.
What is the advantage of the rear cable entry design?
When the mounting plate is installed in its rearmost position, the rear cable entry allows cables to be routed directly towards the mounting plate without requiring large bending radii, helping create a cleaner and more efficient enclosure installation.
Trusted Cable Management for Industrial Enclosures
Rittal cable entry accessories provide coordinated solutions for routing, supporting and sealing cables while helping maintain the required protection and efficient internal layout of industrial enclosures and automation systems.
