TS8609.850 Rittal Divider panel for WD: 1800x500mm

Why Choose the Rittal TS8609.850 Divider Panel?

The Rittal TS8609.850 is a robust divider panel for Rittal TS 8 enclosures, designed to shield and separate individual enclosure cells within industrial cabinet systems. It is specifically sized for compatible enclosures with a height of 1800 mm and depth of 500 mm, providing a purpose-designed internal partition for electrical, automation and machine-building applications.

Manufactured from 1.5 mm sheet steel with a zinc-plated surface finish, the TS8609.850 features an all-round double fold for increased mechanical stability and accommodation of the seal. When correctly installed within the appropriate enclosure configuration, the divider panel supports an IP54 protection category to IEC 60529.

Thanks to the symmetry of the Rittal TS 8 enclosure frame, a suitably dimensioned divider panel can also be installed at the rear. Notches in the corners and halfway up the sides allow angular baying brackets and baying brackets to remain usable with the panel fitted, providing installation flexibility in bayed industrial enclosure systems.

Key Advantages

• Genuine Rittal TS 8 divider panel for shielding individual enclosure cells.
• Designed for compatible enclosures measuring 1800 mm high and 500 mm deep.
• Supports an IP54 protection category to IEC 60529 when correctly integrated into the enclosure system.
• Robust 1.5 mm sheet steel construction provides dependable mechanical stability.
• Zinc-plated surface provides a durable finish for industrial cabinet installations.
• All-round double-folded construction increases stability and accommodates the seal.
• Can also be installed at the rear where enclosure dimensions permit.
• Outer mounting level installation leaves the inner mounting level available for further equipment.

Key Features

• Rittal TS 8 enclosure system accessory.
• Designed for shielding and separating individual enclosure cells.
• Suitable for enclosure height of 1800 mm.
• Suitable for enclosure depth of 500 mm.
• Manufactured from 1.5 mm sheet steel.
• Zinc-plated surface finish.
• IP54 protection category to IEC 60529.
• All-round double fold for stability and seal accommodation.
• Corner and side notches accommodate angular baying brackets and baying brackets.
• Designed for mounting on the outer mounting level.
• Leaves the inner mounting level free for further equipment installation.
• Suitable for rear mounting where the enclosure configuration permits.

Effective Separation of Individual Enclosure Cells

The Rittal TS8609.850 provides a dedicated internal barrier for separating individual sections of a bayed TS 8 enclosure system. Its 1.5 mm zinc-plated sheet steel construction and double-folded perimeter provide a stable partition while accommodating the sealing arrangement required for the enclosure configuration.

Installation on the outer mounting level preserves the inner mounting level for additional equipment, helping maximise usable cabinet space. The panel may also be installed at the rear, allowing equipment such as frequency converters to be arranged with cooling components facing outwards for heat dissipation and protected with an appropriate cover.

Typical Applications

• Separation of individual cells in Rittal TS 8 enclosure systems.
• Bayed industrial electrical control cabinets.
• Industrial automation and process control systems.
• Machine-building electrical enclosures.
• Electrical distribution and switchgear installations.
• Frequency converter installations requiring external heat dissipation arrangements.
• Control cabinets requiring an IP54 partitioning solution within a compatible enclosure configuration.