SR2337.235 Rittal Swing frame large with trim panel for W: 800mm (36 U)

Why Choose the Rittal SR2337.235 Large Swing Frame with Trim Panel?

The Rittal SR2337.235 is a large 36 U swing frame with trim panel designed for mounting 482.6 mm (19-inch) equipment inside compatible Rittal TS and VX SE enclosures. Designed for 800 mm wide enclosures, it provides a hinged internal mounting level that enables convenient access to installed equipment, cabling and rear connections.

The SR2337.235 uses a torsionally rigid frame construction manufactured from sheet steel. The frame is zinc-plated, while the trim panel is spray-finished in RAL 7035. Its 36 U mounting capacity makes it suitable for substantial 19-inch electrical, electronic, networking and industrial control equipment installations.

The swing frame is designed for side installation and can provide a 130° or 180° opening angle depending on the installation kit selected. It supports loads of up to 1500 N when used with standard hinges and can be installed deeper inside the enclosure on a 25 mm pitch pattern where application requirements demand additional front clearance.

Key Advantages

• Provides 36 U of mounting capacity for 482.6 mm (19-inch) equipment.
• Designed specifically for compatible 800 mm wide Rittal TS and VX SE enclosures.
• Large hinged frame provides convenient access to rear cabling and equipment connections.
• Supports loads of up to 1500 N with standard hinges.
• Allows 130° or 180° opening depending on the selected installation kit.
• Torsionally rigid frame construction provides dependable support for installed equipment.
• Can be positioned deeper inside the enclosure using a 25 mm pitch pattern.
• Integrated trim panel creates a neat finished appearance around the 19-inch mounting level.

Key Features

• Rittal SR large swing frame.
• 36 U usable mounting capacity.
• 482.6 mm (19-inch) mounting level.
• Designed for side installation.
• Suitable for 800 mm wide enclosures.
• For compatible enclosures with a minimum height of 1800 mm.
• Sheet steel construction.
• Frame with zinc-plated surface finish.
• Trim panel spray-finished in RAL 7035.
• Maximum load capacity up to 1500 N with standard hinges.
• Adjustable installation depth on a 25 mm pitch pattern.
• Supplied with locking rod system and double-bit lock insert.

Flexible 19-Inch Equipment Mounting with Hinged Access

The Rittal SR2337.235 provides a practical solution where substantial quantities of 482.6 mm (19-inch) equipment need to be installed inside an industrial enclosure while retaining convenient access to the rear. Its 36 U mounting capacity provides space for control, communications, networking and electronic equipment, while the hinged design allows the complete mounting level to swing away for inspection, wiring and maintenance.

Installation flexibility is enhanced by the ability to position the frame deeper inside the enclosure on a 25 mm pitch pattern. The swing frame must be fitted to the left or right according to the installation depth of the equipment, while the selected mounting kit determines whether a 130° or 180° opening angle is available. This combination makes the SR2337.235 suitable for sophisticated industrial enclosure layouts where accessibility and efficient use of internal space are important.

Typical Applications

• 482.6 mm (19-inch) industrial equipment installations.
• Rittal TS floor-standing enclosure systems.
• Rittal VX SE enclosure systems.
• Industrial automation and control cabinets.
• PLC and industrial computer installations.
• Network and communications equipment.
• Industrial monitoring and data acquisition systems.
• Electronic control and instrumentation equipment.
• Applications requiring convenient rear access to rack-mounted components.