NVENT HOFFMAN PCU3066R5 Cabling frame, 300x600x600

Why Choose the nVent HOFFMAN PCU3066R5 Cabling Frame?

The nVent HOFFMAN PCU3066R5 is a robust bottom cabling frame for floor-standing electrical enclosures, designed to provide additional space beneath the enclosure for fixing and routing cables or installing busbar equipment. Measuring 300 mm high × 600 mm wide × 600 mm deep, it creates a dedicated lower compartment that helps preserve valuable installation space inside the main enclosure.

Manufactured from steel, the PCU3066R5 uses a 1.75 mm steel frame with 1.35 mm steel panels. The frame features the same hole pattern as the compatible enclosure frame, allowing relevant nVent HOFFMAN accessories, including CLPF and CLPK components, to be installed within the cabling area.

Designed for compatible 600 mm wide × 600 mm deep floor-standing enclosures, the PCU3066R5 is fixed to the enclosure base using supplied M12 screws. Its RAL 7035 Light Grey structured powder-coated finish provides a durable industrial surface, while compatible PCUP306R5 side panels can be added when the sides of the cabling frame need to be closed.

Key Advantages

• Creates 300 mm of additional cabling space beneath a compatible floor-standing enclosure.
• Designed for compatible 600 mm wide × 600 mm deep enclosures.
• Suitable for fixing and routing cables or mounting busbar equipment.
• Matching enclosure-frame hole pattern supports installation of relevant accessories.
• Robust steel construction for demanding industrial applications.
• Front and rear cover plates are included for a practical enclosure-base installation.

Key Features

• nVent HOFFMAN PCU bottom cabling frame.
• 300 mm height × 600 mm width × 600 mm depth.
• 1.75 mm steel frame.
• 1.35 mm steel panels.
• RAL 7035 Light Grey structured powder-coated finish.
• IP41 and Type 1 protection when installed in the specified configuration.
• Hole pattern identical to the compatible enclosure frame.
• Supports relevant accessories including CLPF and CLPK components.
• Fixed to the enclosure base using supplied M12 screws.
• Compatible with PCUP306R5 side panels for closing the sides.
• Supplied with front and rear cover plates and mounting accessories.

Additional Cable and Busbar Space for Industrial Enclosures

Industrial floor-standing enclosures can require substantial space for incoming power conductors, control wiring and distribution equipment. Installing the nVent HOFFMAN PCU3066R5 beneath a compatible enclosure creates a dedicated 300 mm high lower compartment, providing additional room for cable fixing, routing and busbar equipment without consuming the main enclosure's working space.

The cabling frame uses the same hole pattern as the compatible enclosure frame, allowing relevant mounting accessories to be fitted within the base compartment. Its 600 mm × 600 mm footprint matches compatible enclosure dimensions, while optional PCUP306R5 side panels provide a straightforward way to close the sides where required.

Typical Applications

• Floor-standing industrial electrical enclosures.
• Power and control cable entry and routing.
• Industrial control and automation cabinets.
• Busbar and power distribution installations.
• Machine control and production systems.
• Factory and process automation equipment.