NVENT HOFFMAN PAC01 Front panel, 45×470

Why Choose the nVent HOFFMAN PAC01 Front Panel?

The nVent HOFFMAN PAC01 is a durable plain 19-inch painted steel front panel designed for use with compatible industrial enclosure profile systems. Part of the nVent HOFFMAN PAC front panel range, it provides a professional solution for covering unused sections of 19-inch mounting profiles while maintaining the appearance and functionality of the enclosure.

Manufactured from 1.5 mm mild steel and finished in RAL 7035 light grey, the PAC01 is designed to match compatible nVent HOFFMAN enclosures. The solid panel can be used as a blanking plate to reserve rack space for future equipment or can be machined with suitable openings for mounting equipment that does not use a standard 19-inch mounting format.

With a nominal panel format of 45 × 470 mm and a depth of approximately 12 mm, the PAC01 occupies 1U of vertical rack space. Its robust steel construction makes it suitable for industrial automation, control, electrical distribution and equipment enclosure applications where a clean and durable front-panel solution is required.

Key Advantages

• Purpose-designed plain 19-inch front panel for industrial enclosure systems.
• Provides a neat cover for unused sections of 19-inch mounting profiles.
• Can be machined to accommodate non-19-inch equipment when required.
• Manufactured from durable 1.5 mm mild steel.
• RAL 7035 light-grey finish matches compatible nVent HOFFMAN enclosures.
• 1U height provides efficient use of available enclosure and rack space.
• Helps maintain a professional and consistent enclosure appearance.
• Suitable for industrial automation, process control and electrical installations.

Key Features

• nVent HOFFMAN PAC Series front panel.
• Plain 19-inch panel design.
• Nominal 45 × 470 mm panel format.
• Approximately 44 mm height.
• Approximately 470 mm width across the panel body.
• Approximately 12 mm depth.
• 1U rack height.
• Manufactured from 1.5 mm mild steel.
• RAL 7035 light-grey painted finish.
• Suitable for blanking unused rack positions or machining for equipment installation.
• Supplied as one panel.
• Non-EMC-specific version.

Practical Front Panel for 19-Inch Enclosure Systems

Blank front panels are used to cover unused positions within 19-inch enclosure profiles and swing frames, helping create a clean and professional installation while reserving space for future expansion. The nVent HOFFMAN PAC01 provides a durable steel barrier across an unused 1U section and has a finish designed to complement compatible enclosure systems.

Where specialised equipment cannot be mounted directly to standard 19-inch profiles, the PAC01 can also be machined to create the required cut-outs and mounting points. This versatility makes the panel useful for control equipment, instrumentation, interfaces and other components used within industrial electrical enclosures.

Typical Applications

• 19-inch industrial enclosure systems.
• Electrical and electronic control cabinets.
• Industrial automation enclosures.
• Factory automation and process control systems.
• Blanking unused 1U rack positions.
• Reserving enclosure space for future equipment.
• Custom mounting of non-19-inch equipment.
• Control, instrumentation and communications installations.