Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Rittal DK 7979.438 is an 11 kW, 400 V AC, 16 A three-phase managed PDU with 18 C13 and 12 C19 outlets, individual outlet energy measurement and switching, and network connectivity for high-density professional IT rack power management.
£2,157.05
The Rittal DK 7979.438 is a high-end three-phase managed Power Distribution Unit (PDU) designed for intelligent power distribution, energy measurement, monitoring and remote outlet control within IT network and server racks. As part of the Rittal DK PDU managed series, it combines 18 IEC 60320 C13 outlets and 12 IEC 60320 C19 outlets with measurement, monitoring and switching functions for every individual output slot.
Designed for demanding data centre environments, the DK 7979.438 provides detailed electrical measurement at phase and individual outlet level. Every output can be switched independently, while programmable switching behaviour, configurable start-up states and adjustable warning and alarm thresholds provide administrators with precise control over connected equipment. Measurement accuracy of ±1% for active energy supports reliable capacity planning and energy management.
Operating from a 400 V AC, 16 A three-phase supply through an IEC 60309 / CEE 3L+N+PE input, the PDU provides a rated power capacity of 11 kW. Its slim 44 × 1695 × 70 mm anodised aluminium housing is designed for vertical Zero-U installation in compatible Rittal VX IT and TS IT racks, delivering high-density managed power distribution without consuming valuable 19" rack units.
Managed PDUs such as the Rittal DK 7979.438 provide significantly greater visibility and control than conventional rack power strips. Measurement and monitoring at each individual C13 and C19 outlet allow administrators to analyse the electrical consumption of connected equipment, while individual outlet switching enables remote power control and power cycling without requiring physical access to the rack.
The three-phase design provides substantial capacity for high-density server environments, while the integrated network interfaces allow the PDU to communicate with infrastructure management platforms using protocols including SNMP, Modbus/TCP and OPC-UA. Configurable thresholds, sequential switching, environmental sensor integration and detailed electrical measurements make the DK 7979.438 suitable for sophisticated data centre environments where power availability and equipment-level visibility are essential.
Tick the specs you need, then view products that match.
| Material | Aluminium | |
|---|---|---|
| Accessory Type | Power Distribution | |
| Manufacturer | Rittal | |
| Series | DK PDU managed | |
| Model | DK 7979.438 | |
| Product type | Managed Power Distribution Unit (PDU) | |
| Number of C13 outlets | 18 | |
| C13 outlets per phase | 6 | |
| Number of C19 outlets | 12 | |
| C19 outlets per phase | 4 | |
| Total number of outlets | 30 | |
| Outlet types | IEC 60320 C13 / C19 | |
| Outlet switching | Individually switchable | |
| Measurement | Per phase / infeed and individual output slot | |
| Rated operating voltage | 400 V AC | |
| Rated current | 16 A | |
| Rated power | 11 kW | |
| Number of infeeds | 1 | |
| Input phases | 3-phase | |
| Input connection | IEC 60309 / CEE, 3L+N+PE, 6h | |
| Connection cable length | 3 m | |
| Connection cable type | H05-VV | |
| Number of conductors | 5 | |
| Cable cross-section | 2.5 mm² | |
| Voltage measurement range | 90–255 V | |
| Voltage measurement resolution | 0.1 V | |
| Current measurement range | 0–32 A | |
| Current measurement resolution | 0.1 A | |
| Measurement accuracy | ±1% | |
| Measurement functions | Voltage, current, frequency, active power, active energy, apparent power, apparent energy, reactive power and power factor | |
| Additional monitoring | THD for voltage and current, neutral conductor current | |
| Display | TFT RGB, 128 × 128 pixels | |
| Network interfaces | 2 × RJ45 Ethernet, 10/100/1000 Mbit/s | |
| Sensor interface | CAN bus RJ45 for up to 16 sensors | |
| USB interface | USB 2.0 Type A | |
| Serial interface | RS232 via RJ12 | |
| Digital input | 1 floating contact | |
| Alarm relay | 48 V DC / 2 A | |
| Protocols | IPv4/IPv6, HTTP, HTTPS, SSL, SSH, Telnet, NTP, DHCP, DNS, Syslog, SNMP v1/v2c/v3, Modbus/TCP, OPC-UA and FTP/SFTP | |
| Dimensions (W × L × D) | 44 × 1695 × 70 mm | |
| Housing material | Aluminium | |
| Finish | Anodised, RAL 9005 black | |
| Protection rating | IP20 | |
| Protection class | Class I | |
| Pollution degree | 2 | |
| Overvoltage category | II | |
| Operating temperature | 5–50 °C | |
| Storage temperature | -20–70 °C | |
| Ambient humidity | 10–95% RH, non-condensing | |
| Maximum operating altitude | 3000 m | |
| MTBF at 40 °C | 100,000 hours | |
| Compatible VX IT enclosure frame | ≥ 1800 mm | |
| Compatible VX IT 19" mounting angles | ≥ 2000 mm | |
| Installation | Vertical Zero-U mounting | |
| Pack quantity | 1 pc(s) | |
| EAN | 4028177948228 | |
| Customs tariff number | 85366990 | |
| ETIM 9 | EC002762 | |
| ECLASS 8.0 | 27142604 |
The Rittal DK 7979.438 is a three-phase managed PDU designed to distribute, measure, monitor and remotely control electrical power for equipment installed in high-density server racks and professional data centre infrastructure.
The PDU provides 30 outlets in total, comprising 18 IEC 60320 C13 outlets and 12 IEC 60320 C19 outlets.
The DK 7979.438 operates from a 400 V AC, three-phase, 16 A supply using an IEC 60309 / CEE 3L+N+PE input and provides a rated power capacity of 11 kW.
Yes. All 18 C13 and 12 C19 output slots can be individually switched, measured and monitored, providing detailed equipment-level power control and consumption information.
Yes. The PDU includes dual Gigabit Ethernet interfaces and supports protocols including SNMP, Modbus/TCP and OPC-UA, allowing integration with compatible DCIM and IT infrastructure management systems.
Rittal PDU managed power distribution units combine three-phase power distribution with individual outlet measurement, remote switching, network-based management and environmental monitoring capabilities for professional data centres, server rooms and critical IT infrastructure.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.