DK7979.437 Rittal PDU MANAGED 32A/3P CEE 24XC13+6XC19 LENGTH = 1740

Why Choose the Rittal DK 7979.437 PDU Managed?

The Rittal DK 7979.437 is a high-end three-phase managed Power Distribution Unit (PDU) designed for intelligent power distribution, energy measurement, monitoring and remote outlet control within IT server and network racks. As part of the Rittal DK PDU managed series, it combines 24 IEC 60320 C13 outlets and 6 IEC 60320 C19 outlets with measurement and switching functionality for every individual output slot.

Designed for demanding data centre environments, the DK 7979.437 provides detailed current and power monitoring at individual outlet level. Every output slot can be switched independently, while programmable switching behaviour and configurable start-up states following voltage recovery provide precise remote control of connected equipment. Measurement accuracy of ±1% for active energy supports reliable capacity planning and energy management.

Operating from a 400 V AC, 32 A three-phase supply through an IEC 60309 / CEE 3L+N+PE input, the PDU provides a rated power capacity of approximately 22 kW. Its slim 44 × 1740 × 70 mm black anodised aluminium housing is designed for vertical Zero-U installation in compatible Rittal VX IT and TS IT racks, delivering high-density managed power distribution without consuming valuable 19" rack units.

Key Advantages

• High-end three-phase managed PDU for professional IT rack power distribution.
• 24 C13 and 6 C19 outlets provide flexible connections for high-density IT equipment.
• Measurement, monitoring and switching functionality available for every individual output slot.
• 400 V AC, 32 A three-phase input with approximately 22 kW power capacity.
• ±1% active energy measurement accuracy supports dependable energy and capacity monitoring.
• Integrated TFT colour display provides direct access to electrical consumption data and configuration.
• Network connectivity enables comprehensive remote monitoring and management.
• Colour-coded phases and fuse circuits simplify identification: L1 pink, L2 black and L3 white.
• Self-powered design requires no separate external power supply.
• Supports tool-free Zero-U vertical installation in compatible Rittal VX IT and TS IT racks.

Key Features

• Rittal DK PDU managed series.
• 24 × IEC 60320 C13 output sockets.
• 6 × IEC 60320 C19 output sockets.
• Each output slot is individually switchable.
• Measurement and monitoring functions for each individual output slot.
• 400 V AC rated operating voltage.
• 32 A maximum rated current.
• Approximately 22 kW rated three-phase power capacity.
• Three-phase IEC 60309 / CEE 3L+N+PE, 6h input.
• 6 × 16 A hydraulic-magnetic protective circuit-breakers.
• Measures voltage, current, frequency, active power, active energy, apparent power, apparent energy, reactive power and power factor.
• THD measurement for voltage and current across all three phases.
• Neutral conductor current measurement and fuse monitoring.
• ±1% measurement accuracy.
• Freely configurable warning and alarm thresholds per outlet for voltage, current and power.
• Programmable switch-on behaviour following voltage recovery: on, off or previous status.
• Integrated 128 × 128 pixel RGB TFT display.
• Rotatable controller board for flexible installation and servicing.
• Network interface for remote administration and infrastructure monitoring.
• 3 m connection cable supplied with fixed CEE input connector.

High-Capacity Individual Outlet Management for IT Racks

Managed PDUs such as the Rittal DK 7979.437 provide significantly greater visibility and control than conventional rack power strips. Measurement and monitoring at each individual C13 and C19 outlet allow administrators to analyse the consumption of connected equipment, while individual outlet switching enables remote power control and power cycling without requiring physical access to the rack.

The three-phase design provides substantial power capacity for high-density server environments, while detailed measurement functions support load management across critical IT infrastructure. Configurable warning and alarm thresholds, fuse monitoring, THD measurement and remote management capabilities make the DK 7979.437 suitable for sophisticated data centre applications where power availability and equipment-level visibility are essential.

Typical Applications

• High-density data centre server racks.
• Enterprise servers and high-power computing equipment.
• Storage and data processing systems.
• Individual device energy consumption monitoring.
• Remote switching and power cycling of IT equipment.
• Three-phase rack-level power and capacity management.
• Rittal VX IT and TS IT rack installations.
• Zero-U vertical PDU installations.