DK5502.310 Rittal Gland plate one-piece vented WxD: 800x600mm For IT

DK5502.310 Rittal Gland plate one-piece vented WxD: 800x600mm For IT

Rittal DK 5502.310 is a one-piece zinc-plated vented gland plate for 800 x 600 mm TS IT enclosures, providing filtered base airflow and rear brush-strip cable entry.

SKU: DK5502.310Alt SKU: 5502310MPN: DK5502.310
Price on application Contact us for pricing and availability.
Call 01708 343600

Why Choose the Rittal DK 5502.310 One-Piece Vented Gland Plate?

The Rittal DK 5502.310 is a one-piece vented gland plate designed to completely cover the open base of compatible Rittal TS IT enclosures. Its fully perforated construction allows cold air to enter through the enclosure base or base/plinth area, supporting effective airflow management for server, network and other IT infrastructure installations.

Designed for 800 × 600 mm enclosures, the DK 5502.310 combines ventilation with practical cable management. An integrated brush strip at the rear allows cables to enter from below across the enclosure width while helping maintain an organised base opening around the installed cabling.

The gland plate is manufactured from durable zinc-plated sheet steel and incorporates guides for straightforward installation and replacement of the supplied filter mat. This combination of ventilation, filtration and cable entry makes the DK 5502.310 particularly suitable for IT enclosures with rack climate control where reliable cold-air intake is required.

Key Advantages

  • One-piece design provides complete coverage of the open enclosure base.
  • Fully perforated surface supports cold-air intake from below.
  • Designed for compatible 800 × 600 mm TS IT enclosures.
  • Rear brush-strip cable entry allows convenient routing across the enclosure width.
  • Integrated guides simplify installation and replacement of the filter mat.
  • Potential equalisation is supported through the assembly components and earthing points.

Key Features

  • Rittal DK one-piece vented gland plate.
  • Designed for Rittal TS IT enclosure systems.
  • Suitable for 800 mm wide × 600 mm deep enclosures.
  • Perforated across the entire surface for airflow.
  • Supports cold-air inflow from the enclosure base or base/plinth area.
  • Rear brush strip for cable entry from below.
  • Integrated guides accommodate the supplied filter mat.
  • Sheet steel construction.
  • Zinc-plated surface finish for durable installation.
  • Supplied with filter mat and assembly parts.

Integrated Airflow and Cable Entry for IT Enclosures

Efficient enclosure cooling depends on providing a controlled path for cold air to reach installed servers, switches and other heat-generating IT equipment. The Rittal DK 5502.310 is perforated across its entire surface, allowing cooling air to enter through the base or base/plinth area and supporting installations that use rack climate control.

At the same time, the rear brush strip provides a convenient route for cables entering from beneath the enclosure. The supplied filter mat can be accommodated using integral guides and readily replaced when required, combining cable management, filtered airflow and complete base coverage in a single enclosure accessory.

Typical Applications

  • Rittal TS IT server and network enclosures.
  • Data centre rack installations.
  • IT enclosures with rack climate control.
  • Bottom-entry network and power cabling.
  • Server rooms and telecommunications infrastructure.
  • Applications requiring filtered cold-air intake through the enclosure base.

Technical Specifications

Tick the specs you need, then view products that match.

Material Steel
Accessory Type Gland Plate
Manufacturer Rittal
Series DK
Model DK 5502.310
Article number 5502310
Product type One-piece vented gland plate
Application Complete coverage, ventilation and cable entry for enclosure base
Compatible enclosure system TS IT
Suitable enclosure width 800 mm
Suitable enclosure depth 600 mm
Brush strip material Plastic, UL 94-HB
Filter mat material Foamed plastic
Surface finish Zinc-plated
Ventilation Perforated across the entire surface
Cable entry Rear brush-strip entry from below across the enclosure width
Filter provision Integral guides for filter mat installation and replacement
Potential equalisation Via assembly components and earthing points
Pack quantity 1 pc
Supply includes One-piece vented gland plate with rear cable entry, filter mat and assembly parts

Frequently Asked Questions

What is the Rittal DK 5502.310 used for?

The DK 5502.310 is a one-piece vented gland plate used to completely cover the open base of a compatible TS IT enclosure while providing ventilation, filtered airflow and rear cable entry.

What enclosure size is the Rittal DK 5502.310 designed for?

The gland plate is designed for compatible TS IT enclosures measuring 800 mm wide × 600 mm deep.

How does the DK 5502.310 support enclosure cooling?

The gland plate is perforated across its entire surface, allowing cold air to flow into the enclosure from the base or base/plinth area, particularly for installations using rack climate control.

Does the Rittal DK 5502.310 provide cable entry?

Yes. A brush strip at the rear provides convenient cable entry from below across the enclosure width.

What is supplied with the Rittal DK 5502.310?

The product is supplied with the one-piece vented gland plate with rear cable entry, a filter mat and assembly parts.

Trusted by Data Centre and IT Infrastructure Professionals

Rittal IT enclosure accessories provide integrated solutions for airflow, cable management and equipment protection, with the DK 5502.310 combining complete base coverage, filtered cold-air intake and convenient bottom cable entry for professional TS IT installations.