Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Rittal DK5502.020 is a RAL 7035 fan mounting plate for active ventilation of compatible IT enclosures, supplied with two 230 V fans and a thermostat and expandable to a maximum of six fans.
The Rittal DK5502.020 is a dedicated fan mounting plate for active ventilation of IT enclosures. Designed for installation in the cut-out integrated into a compatible roof plate, it provides a ready-to-connect ventilation solution for Rittal VX IT and TS IT enclosures and selected TE 8000 configurations.
The unit is supplied pre-equipped with two fans and can be expanded to accommodate a maximum of six fans. Each installed fan provides an unimpeded airflow of 160/180 m³/h at 50/60 Hz, helping remove heat generated by servers, network equipment and other rack-mounted electronics.
Finished in RAL 7035, the DK5502.020 includes a thermostat, open-ended connection cable and assembly parts. Its 230 V single-phase electrical configuration and integrated temperature control provide a practical foundation for thermostatically controlled ventilation in professional IT infrastructure.
Servers, network switches and other rack-mounted electronics can generate significant heat during continuous operation. The Rittal DK5502.020 provides active roof-mounted ventilation to promote airflow through the enclosure and help remove accumulated warm air from sensitive IT equipment installations.
Its expandable configuration allows additional fans to be installed when greater ventilation capacity is required, up to a total of six fans. The included thermostat enables temperature-dependent operation, while the pre-wired construction simplifies integration into suitable Rittal IT enclosure installations.
Tick the specs you need, then view products that match.
| Accessory Type | Mounting Plate | |
|---|---|---|
| Manufacturer | Rittal | |
| Model | DK5502.020 | |
| Article number | DK 5502.020 | |
| Product type | Fan mounting plate | |
| Application | Active IT enclosure ventilation | |
| Colour | RAL 7035 | |
| Width | 340 mm | |
| Depth | 550 mm | |
| Number of fans supplied | 2 | |
| Maximum number of fans | 6 | |
| Air throughput per fan | 160/180 m³/h at 50/60 Hz, unimpeded airflow | |
| Rated operating voltage | 230 V, 1~, 50/60 Hz | |
| Noise level per fan | 37 dB(A) | |
| Operating temperature range | 5–55 °C | |
| Suitable enclosure types | VX IT, TS IT | |
| Application location | Cut-out integrated into the roof plate | |
| Supply includes | 1 fan unit, 2 fans, 1 thermostat, open-ended connection cable and assembly parts | |
| Pack quantity | 1 piece | |
| Net weight | 4.3 kg | |
| Gross weight | 4.38 kg | |
| Customs tariff number | 84149000 | |
| EAN | 4028177679252 | |
| ECLASS 8.0 | 27189272 |
The Rittal DK5502.020 is a fan mounting plate for active ventilation of compatible Rittal IT enclosures and is installed in the cut-out integrated into the roof plate.
The unit is supplied with two fans and can be expanded with additional fans to a maximum of six fans.
Rittal specifies an unimpeded airflow of 160/180 m³/h per fan at 50/60 Hz.
Yes. The supply includes one thermostat together with the fan unit, two fans, an open-ended connection cable and assembly parts.
Rittal specifies the fan mounting plate for VX IT and TS IT enclosures, with selected installation configurations also available for the TE 8000 system.
Rittal IT infrastructure accessories provide data-centre operators, network engineers and system integrators with coordinated solutions for rack ventilation and thermal management, helping maintain suitable operating conditions for critical server and networking equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.