Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 856098 electrical enclosure cable entry flange, order code 4TBO856098C0100, from the ABB APO Enclosures product group, featuring a 300 mm width and four metric cable entry positions configured as 2 × M25 + 2 × M40/M50 for compatible electrical enclosure assemblies.
£16.53
The ABB 856098, manufacturer order code 4TBO856098C0100, is a 300 mm electrical enclosure cable entry flange from the ABB APO Enclosures product group. Featuring a 2 × M25 + 2 × M40/M50 cable entry configuration, this flange is designed for use with compatible electrical enclosure assemblies requiring multiple metric cable entry positions.
As part of ABB's APO enclosure range, the 856098 provides a dedicated flange component for electrical installation and distribution applications. Its combination of two M25 entries and two M40/M50-designated entries supports cable routing requirements involving different cable entry sizes. This makes the flange a practical option for compatible electrical assemblies where appropriately sized cable glands and entry fittings are required.
With a specified width of 300 mm and a total of four cable entry positions, the ABB 856098 offers a defined cable entry arrangement for electrical enclosure installations. Its manufacturer order code 4TBO856098C0100 enables accurate identification when specifying new installations, replacement components or enclosure accessories.
Cable entry flanges provide designated locations for routing electrical cables into or out of enclosure assemblies. Correctly selected cable entry components help organise wiring, accommodate appropriately specified cable glands and support practical electrical installation and maintenance. The flange configuration must be matched to the enclosure, cable sizes and required entry fittings.
The ABB 856098 300 mm Cable Entry Flange features a 2 × M25 + 2 × M40/M50 configuration. This provides two M25-designated positions alongside two positions identified for the M40/M50 arrangement. M25, M40 and M50 are standard metric thread designations corresponding to nominal thread diameters of 25 mm, 40 mm and 50 mm respectively.
The combination of entry sizes makes the ABB 856098 relevant to electrical installations requiring different cable gland dimensions within a single flange arrangement. The M40/M50 designation should be checked against the intended gland and entry fitting configuration before installation, as the designation alone does not establish that every entry accepts both sizes without suitable preparation or accessories.
As part of the ABB APO Enclosures product group, the 856098 should be selected alongside compatible enclosure bases, covers and installation accessories. Its specified 300 mm width is an important reference when identifying the correct flange for an existing or planned enclosure assembly.
Electrical contractors and panel builders should verify the flange interface, fixing arrangements, cable gland compatibility and any required sealing components. The environmental protection rating of the completed installation depends on the enclosure assembly, cable entry fittings and installation method rather than the flange designation alone.
| Product group | APO Enclosures |
|---|---|
| ABB order code | 4TBO856098C0100 |
| Product type | Electrical enclosure cable entry flange |
| Product description | Flange 300w 2xM25 + 2xM40/50 |
| Flange width | 300 mm |
| Total cable entry positions | 4 |
| M25 cable entry positions | 2 |
| M40/M50-designated cable entry positions | 2 |
| Cable entry configuration | 2 × M25 + 2 × M40/M50 |
| Cable entry system | Metric |
| Nominal M25 thread diameter | 25 mm |
| Nominal M40 thread diameter | 40 mm |
| Nominal M50 thread diameter | 50 mm |
| Application | Cable entry for compatible electrical enclosure assemblies |
The ABB 856098 is a cable entry flange for compatible electrical enclosure assemblies. It provides a 2 × M25 + 2 × M40/M50 configuration for routing electrical cables through appropriately selected cable entry fittings.
The ABB 856098 has four cable entry positions, comprising two M25 positions and two M40/M50-designated positions.
The flange is specified with 2 × M25 + 2 × M40/M50 metric cable entries. M25, M40 and M50 correspond to nominal metric thread diameters of 25 mm, 40 mm and 50 mm respectively. The correct gland selection and M40/M50 entry arrangement should be verified before installation.
The manufacturer order code is 4TBO856098C0100, corresponding to the ABB 856098 300 mm cable entry flange with a 2 × M25 + 2 × M40/M50 configuration.
Yes, the ABB 856098 may be suitable as a replacement where the existing installation requires a 300 mm flange with the same 2 × M25 + 2 × M40/M50 configuration. Compatibility with the enclosure interface, fixing arrangements, cable glands and complete electrical assembly should be confirmed before installation.
ABB provides electrical enclosure components and accessories for installation, distribution and equipment integration applications. The ABB 856098 Cable Entry Flange, order code 4TBO856098C0100, offers a clearly identified 300 mm flange configuration with two M25 and two M40/M50-designated cable entry positions for compatible ABB APO enclosure assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.