Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 1STQ009998B0000 is a 2 mm thick IP4X aerated external Panel R designed for compatible 2000 mm high and 625 mm wide ABB System pro E Power low-voltage switchboard enclosure configurations.
£447.30
The ABB 1STQ009998B0000 is a dedicated 2 mm IP4X aerated external panel designed for compatible ABB System pro E Power low-voltage electrical distribution switchboards. Identified by the manufacturer's designation 2MM_IP4X AERATED EXT. PAN.R.H2000 W625, this enclosure accessory is specified for a nominal height of 2000 mm and width of 625 mm.
Featuring an aerated external panel configuration, this ABB enclosure component provides a ventilation-oriented covering solution for appropriately engineered electrical switchboards. Its specified 2 mm thickness and IP4X protection classification make it suitable for designated System pro E Power assemblies where solid-object protection and ventilation provisions form part of the overall enclosure design.
The manufacturer's Panel R designation identifies this particular aerated external panel variant within the ABB range. Designed for compatible 2000 mm high × 625 mm wide enclosure configurations, the ABB 1STQ009998B0000 helps professional electrical panel builders achieve coordinated external covering and a consistent modular switchboard finish.
Low-voltage electrical distribution switchboards can contain circuit breakers, busbar assemblies and other components that generate heat during normal operation. Appropriate thermal management is therefore an important consideration when selecting enclosure accessories. The ABB 1STQ009998B0000 IP4X aerated external panel provides a ventilation-oriented covering solution for compatible 2000 mm high × 625 mm wide System pro E Power configurations. Its aerated design supports airflow where the complete switchboard has been engineered to use ventilated external panels.
The IP4X classification indicates protection against solid foreign objects of 1 mm diameter or greater and the corresponding protection against access to hazardous parts. The letter X means that a water ingress protection classification is not specified by this designation. The completed switchboard's protection level and thermal performance depend on its overall construction, equipment arrangement, ventilation design and correct installation. The Panel R designation should be matched to the relevant ABB assembly documentation to confirm its intended position and compatibility.
| Product series | System pro E Power |
|---|---|
| ABB order code | 1STQ009998B0000 |
| Manufacturer designation | 2MM_IP4X AERATED EXT. PAN.R.H2000 W625 |
| Product type | Aerated external enclosure panel |
| Product variant | Panel R |
| Product category | Electrical switchboard external panels and enclosure accessories |
| Panel configuration | Aerated / ventilated |
| Specified panel thickness | 2 mm |
| Protection classification | IP4X |
| Nominal enclosure height | 2000 mm |
| Nominal enclosure width | 625 mm |
| Nominal enclosure format | H2000 × W625 |
| Installation function | External enclosure covering with ventilation provision |
| Compatible enclosure system | ABB System pro E Power |
| IP4X solid-object protection | Protection against solid foreign objects of 1 mm diameter or greater in a correctly assembled enclosure |
| Water ingress protection | Not specified by the IP4X designation |
| Application | Low-voltage electrical distribution switchboards |
| Equipment function | Mechanical enclosure accessory |
The ABB 1STQ009998B0000 is a 2 mm IP4X aerated external panel designed for compatible ABB System pro E Power low-voltage distribution switchboards. It provides external enclosure coverage with ventilation provision for the designated Panel R configuration.
The product is specified for a nominal enclosure height of 2000 mm and width of 625 mm, with a stated panel thickness of 2 mm. The height and width identify the designated enclosure configuration and should not be assumed to represent verified overall external measurements of the individual panel.
IP4X indicates protection against solid foreign objects of 1 mm diameter or greater and the corresponding protection against access to hazardous parts. The X indicates that no water ingress protection classification is specified. The completed enclosure must be correctly assembled to achieve its intended protection rating.
Panel R is part of ABB's supplied product designation for this aerated external panel variant. The precise mounting position and arrangement should be confirmed using the relevant ABB System pro E Power assembly documentation rather than assuming interchangeability with other panel versions.
Yes. The product is specified as an aerated external panel, indicating a ventilation-oriented design. Its actual airflow contribution and cooling performance depend on the complete switchboard configuration, installed equipment and thermal design.
ABB System pro E Power accessories support professional low-voltage switchboard construction through coordinated modular enclosure components. The ABB 1STQ009998B0000 provides a dedicated 2 mm IP4X aerated external Panel R for compatible 2000 mm high × 625 mm wide configurations, combining external enclosure coverage with ventilation provision for appropriately engineered industrial and commercial electrical distribution installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.