1STQ009988B0000 ABB System pro E Power IP4X Aerated External Panel 1800 x 600 mm 2 mm

Why Choose the ABB 1STQ009988B0000 System pro E Power IP4X Aerated External Panel?

The ABB 1STQ009988B0000 is a 2 mm thick IP4X aerated external panel designed for compatible ABB System pro E Power low-voltage main distribution switchboards. Featuring a nominal height of 1800 mm and width of 600 mm, this enclosure accessory provides a manufacturer-specified external panel solution for modular electrical distribution assemblies requiring ventilation provisions.

Part of the ABB System pro E Power enclosure accessory range, this aerated panel combines an external enclosure function with a ventilated construction. Its aerated design supports airflow through appropriately configured switchboard assemblies, while its IP4X designation identifies the intended protection against access to hazardous parts and the ingress of solid foreign objects.

Designed for professional electrical panel builders, switchboard manufacturers and distribution engineers, the ABB 1STQ009988B0000 provides a dedicated solution for 1800 mm high × 600 mm wide enclosure arrangements. Its specified 2 mm nominal thickness and defined dimensions help engineers coordinate external panel selection, enclosure construction and ventilation requirements within compatible ABB System pro E Power switchboards.

Key Advantages

• Genuine ABB System pro E Power external enclosure panel.
• Aerated construction for compatible ventilated switchboard arrangements.
• 2 mm nominal panel thickness for the specified enclosure component.
• 1800 mm nominal height for corresponding switchboard structures.
• 600 mm nominal width for compatible enclosure sections.
• Specified for IP4X enclosure protection configurations.
• Supports ventilation planning within appropriately designed electrical distribution assemblies.
• Provides a defined external panel component for modular switchboard construction.
• Helps coordinate enclosure dimensions and ventilation provisions during panel building.
• Designed for integration with compatible ABB System pro E Power structural accessories.
• Suitable for industrial and commercial low-voltage distribution projects.
• Provides a clearly identified ABB order code for specification, procurement and compatible replacement.

Key Features

• ABB order code: 1STQ009988B0000.
• Product series: System pro E Power.
• Product type: Aerated external panel.
• Nominal material thickness: 2 mm.
• Nominal height: 1800 mm.
• Nominal width: 600 mm.
• Specified protection configuration: IP4X.
• Panel arrangement: External enclosure panel.
• Ventilation configuration: Aerated.
• Designed for compatible modular low-voltage main distribution switchboards.
• Supports the integration of ventilation provisions into enclosure construction.
• Intended for use with compatible ABB System pro E Power structural and mounting components.
• Suitable for professional electrical panel-building applications.

Reliable Aerated Panel Integration for Modular Switchboards

The ABB 1STQ009988B0000 aerated external panel provides a dedicated enclosure component for compatible System pro E Power switchboard configurations requiring external ventilation provisions. In low-voltage distribution assemblies, appropriate ventilation can form an important part of the overall thermal design, particularly where internal electrical equipment generates heat during normal operation.

The panel's aerated construction provides ventilation openings that can support airflow through a suitably designed enclosure. However, the panel does not independently establish a particular airflow rate, cooling capacity or permissible internal operating temperature. The thermal performance of the completed switchboard depends on the installed electrical equipment, internal component arrangement, ventilation paths, installation environment and verified temperature-rise characteristics.

The product is specified for an IP4X enclosure configuration. Under IEC 60529, IP4X indicates protection against access with a wire and ingress of solid foreign objects measuring 1 mm or larger. The letter X means that a water-ingress protection rating is not specified by this designation. Achieving the intended IP4X classification depends on the complete enclosure, including the panel interfaces, frame, doors, covers and other correctly installed components.

With nominal dimensions of 1800 mm high × 600 mm wide and a specified thickness of 2 mm, the panel must be matched to the corresponding ABB System pro E Power enclosure arrangement. Installers should verify mounting compatibility, fixing requirements and ventilation clearances against the applicable ABB assembly documentation. The completed switchboard must be assessed for mechanical integrity, ingress protection, temperature rise and electrical safety in accordance with the relevant assembly requirements.

Typical Applications

• ABB System pro E Power main distribution switchboards.
• Compatible 1800 mm high × 600 mm wide enclosure arrangements.
• Low-voltage distribution assemblies requiring aerated external panels.
• Switchboard configurations designed for IP4X protection.
• Industrial electrical distribution enclosures.
• Commercial building main distribution boards.
• Modular switchboards incorporating ventilation provisions.
• Manufacturing plant electrical distribution infrastructure.
• Professional OEM switchboard manufacturing and electrical panel building.
• Enclosure construction, modification and refurbishment projects.
• Replacement of compatible ABB System pro E Power external panels.