Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ009423A0000 ABB PTBB2570 System pro E Power IP40 Blind Top/Bottom Panel 250 mm x 700 mm
ABB PTBB2570 (1STQ009423A0000) is an IP40 blind top/bottom enclosure panel designed for compatible 250 mm wide and 700 mm deep ABB System pro E Power low-voltage switchboard configurations.
£48.15
Why Choose the ABB PTBB2570 System pro E Power IP40 Blind Top/Bottom Panel?
The ABB PTBB2570 (1STQ009423A0000) is a dedicated IP40 blind top/bottom panel designed for compatible ABB System pro E Power low-voltage electrical distribution switchboards. Specified for a nominal enclosure width of 250 mm and depth of 700 mm, this accessory provides a solid closure solution for the top or bottom of a compatible modular switchboard enclosure.
As part of the ABB System pro E Power range, the PTBB2570 supports professional switchboard construction by providing a manufacturer-designated enclosure covering component. Its blind panel design offers an uninterrupted closure surface without designated cable-entry openings, making it suitable for enclosure positions where an open cable passage is not required.
Designed for compatible IP40 enclosure configurations, the PTBB2570 helps electrical panel builders complete the intended top or bottom covering arrangement. Its nominal 250 mm × 700 mm format makes it a practical choice for appropriately configured System pro E Power switchboards used in industrial and commercial low-voltage power distribution installations.
Key Advantages
- Genuine ABB System pro E Power blind top/bottom panel for modular switchboards.
- Designed for 250 mm wide × 700 mm deep nominal enclosure configurations.
- Specified for compatible IP40 electrical enclosure assemblies.
- Solid blind design provides enclosure coverage without designated cable-entry openings.
- Suitable for the top or bottom of compatible switchboard structures.
- Helps close unused enclosure openings in the intended assembly.
- Supports a coordinated and professional electrical cabinet finish.
- Provides a dedicated alternative to improvised enclosure covering components.
- Suitable for new switchboard construction and compatible enclosure maintenance.
- Dedicated ABB ordering reference simplifies identification and specification.
Key Features
- ABB System pro E Power modular enclosure accessory.
- PTBB2570 manufacturer model designation.
- 1STQ009423A0000 ABB ordering reference.
- Blind top/bottom enclosure panel.
- IP40 designated protection classification.
- 250 mm nominal enclosure width.
- 700 mm nominal enclosure depth.
- Designed for compatible top or bottom enclosure positions.
- Solid covering configuration without designated cable-entry openings.
- Supports the completion of modular switchboard enclosure assemblies.
- Compatible with designated ABB System pro E Power structures.
- Suitable for industrial and commercial low-voltage distribution applications.
- Designed for professional electrical panel building and enclosure assembly.
- Mechanical enclosure accessory rather than an electrical switching device.
Reliable Top and Bottom Enclosure Coverage for Modular Switchboards
A properly assembled low-voltage switchboard requires suitable enclosure covering components to close designated openings and help protect internal electrical equipment. The ABB PTBB2570 IP40 blind top/bottom panel provides a dedicated solid closure for compatible 250 mm wide × 700 mm deep System pro E Power enclosures. Its blind configuration is particularly useful where the selected top or bottom position does not require a cable-entry opening.
The IP40 designation identifies the intended protection classification of the completed enclosure arrangement. An IP40 enclosure provides protection against solid foreign objects of 1 mm diameter or greater and the corresponding protection against access to hazardous parts, but it does not provide a specified level of protection against water ingress. The PTBB2570 panel alone does not establish an IP40 rating; the final classification depends on the complete enclosure structure, correctly selected components and installation in accordance with ABB assembly instructions.
Typical Applications
- ABB System pro E Power main distribution switchboards.
- Compatible 250 mm wide × 700 mm deep electrical enclosures.
- Top closure of modular low-voltage distribution cabinets.
- Bottom closure of compatible switchboard structures.
- Indoor electrical enclosures designed for IP40 protection.
- Industrial power distribution switchboards.
- Commercial building main distribution boards.
- Enclosure positions where a blind covering is required instead of a cable-entry panel.
- Professional electrical panel building and switchboard manufacturing.
- Replacement of compatible System pro E Power top or bottom blind panels.
Technical Specifications
| Product series | System pro E Power |
|---|---|
| ABB order code | 1STQ009423A0000 |
| Product type | Blind top/bottom panel |
| Product category | Electrical switchboard enclosure covering accessories |
| Panel configuration | Blind / solid closure |
| Designated protection classification | IP40 |
| Nominal enclosure width | 250 mm |
| Nominal enclosure depth | 700 mm |
| Nominal enclosure format | 250 mm × 700 mm |
| Installation position | Top or bottom of compatible enclosure |
| Designated cable-entry openings | None |
| Compatible enclosure system | ABB System pro E Power |
| Installation function | Top/bottom enclosure closure |
| IP40 solid-object protection | Protection against solid foreign objects of 1 mm diameter or greater in a correctly assembled enclosure |
| IP40 water protection | No specified water ingress protection |
| Application | Low-voltage main distribution switchboards |
| Equipment function | Mechanical enclosure covering accessory |
Frequently Asked Questions
What is the ABB PTBB2570 1STQ009423A0000 used for?
The ABB PTBB2570 is an IP40 blind top/bottom panel designed to close a compatible top or bottom enclosure position in an ABB System pro E Power low-voltage switchboard.
What enclosure dimensions is the ABB PTBB2570 designed for?
The PTBB2570 is specified for a nominal enclosure width of 250 mm and depth of 700 mm. These values identify the intended switchboard configuration rather than verified external measurements of the individual panel.
What does the IP40 designation mean for the ABB PTBB2570?
IP40 indicates that a correctly assembled enclosure provides protection against solid foreign objects of 1 mm diameter or greater and the corresponding protection against access to hazardous parts. It does not indicate water ingress protection. The blind panel alone does not guarantee the enclosure's IP40 rating.
Does the ABB PTBB2570 have cable-entry openings?
The PTBB2570 is specified as a blind panel, meaning it is intended to provide solid top or bottom covering rather than a designated cable-entry opening. Where cable entry is required, an appropriately specified enclosure accessory should be selected.
Can the ABB PTBB2570 be installed at either the top or bottom of a switchboard?
The PTBB2570 is designated as a top/bottom enclosure accessory for compatible ABB System pro E Power assemblies. The appropriate installation position and any required fixing components should be confirmed against the relevant ABB enclosure assembly instructions.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power enclosure accessories support professional low-voltage switchboard construction through coordinated modular covering and assembly solutions. The PTBB2570 (1STQ009423A0000) provides a dedicated IP40 blind top/bottom panel for nominal 250 mm wide × 700 mm deep enclosure configurations, helping electrical panel builders achieve consistent enclosure coverage and professional switchboard finishing in industrial and commercial power distribution installations.
