Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ009415A0000 ABB PDLG1850 IP40 Glass Door 1800 x 500 mm System pro E Power
ABB PDLG1850 (1STQ009415A0000) is an IP40 glass door measuring 1800 mm high and 500 mm wide, designed for ABB System pro E Power low-voltage switchboards with a glazed viewing area, reversible hinges and robust steel construction.
£577.91
Why Choose the ABB PDLG1850 IP40 Glass Door?
The ABB PDLG1850 (1STQ009415A0000) is a high-quality IP40 glass door for low-voltage electrical switchboards, designed to provide protective enclosure access and clear visibility of installed electrical equipment. As part of the ABB System pro E Power range, this door is specifically developed for electrical panel builders, switchboard manufacturers and industrial engineers requiring a reliable, professional enclosure solution for power distribution assemblies.
The PDLG1850 combines a robust pickled sheet steel door construction with a glazed viewing area, allowing operators and maintenance personnel to inspect internal equipment without routinely opening the enclosure. Its modular design simplifies integration with compatible ABB System pro E Power switchboard structures, while the reversible door arrangement provides flexibility during installation.
With nominal dimensions of 1800 mm in height and 500 mm in width, the ABB PDLG1850 is designed for compatible full-height switchboard compartments. The door supports an IP40 protection configuration when correctly installed as part of a suitable enclosure assembly. Its practical design, supplied mounting components and wide opening angle make it an effective solution for industrial electrical distribution cabinets and commercial switchboard installations.
Key Advantages
- Genuine ABB System pro E Power glass door designed for low-voltage electrical switchboards.
- IP40 protection configuration helps prevent access by solid objects larger than 1 mm when correctly assembled.
- 1800 mm height and 500 mm width for compatible modular switchboard structures.
- Glazed viewing area allows visual inspection of internal electrical equipment without opening the door.
- Durable pickled sheet steel construction provides mechanical strength and dependable enclosure integration.
- Reversible opening arrangement allows the door to be configured for left-hand or right-hand hinging.
- 135° opening angle provides convenient access for installation, inspection and maintenance.
- Supplied with compatible hinges, closing brackets and handle for straightforward assembly.
- Suitable for front or rear installation on compatible System pro E Power enclosures.
- Modular construction supports professional switchboard manufacturing and enclosure refurbishment.
Key Features
- ABB System pro E Power modular switchboard range.
- PDLG1850 glass door for electrical distribution enclosures.
- ABB order code 1STQ009415A0000.
- 1800 mm nominal height.
- 500 mm nominal width.
- IP40 protection rating in a correctly configured enclosure assembly.
- Pickled sheet steel frame with glazed viewing section.
- Door construction without a perimeter sealing gasket.
- Four rubber overlapping plugs included in the door arrangement.
- Four hinges designed for screw fixing to compatible enclosure uprights.
- Four door closing brackets with covers.
- Supplied with a door handle for convenient operation.
- Reversible hinge and handle arrangement for installation flexibility.
- 135° maximum opening angle for a single-column installation.
- Suitable for compatible front and rear switchboard mounting arrangements.
- Designed for modular assembly with ABB System pro E Power enclosure structures.
Technical Specifications
- Manufacturer: ABB
- Product range: System pro E Power
- Model: PDLG1850
- ABB order code: 1STQ009415A0000
- Manufacturer description: GLASS DOOR IP40 H=1800MM W=500MM
- Product type: Glazed electrical switchboard door
- Accessory category: Electrical enclosure doors and accessories
- Nominal height: 1800 mm
- Nominal width: 500 mm
- Protection rating: IP40
- Door construction: Pickled sheet steel with glazed viewing area
- Sealing arrangement: Without perimeter gasket
- Rubber overlapping plugs: 4
- Opening angle: 135°
- Hinges: 4 screw-mounted hinges
- Closing brackets: 4 brackets with covers
- Handle: Included
- Door handing: Reversible, left-hand or right-hand opening
- Installation position: Front or rear of compatible enclosure structures
- Mounting arrangement: Hinges secured to compatible vertical enclosure uprights
- Compatible enclosure system: ABB System pro E Power
- Application: Low-voltage electrical distribution switchboards
- Package quantity: 1 door assembly
Reliable Protection and Visibility for Electrical Switchboards
Electrical switchboard doors provide an important protective barrier between installed electrical equipment and the surrounding environment. The ABB PDLG1850 IP40 glass door combines this enclosure function with the convenience of a transparent viewing section, allowing operators to observe equipment status, indicators and internal arrangements without unnecessarily accessing the electrical compartment.
The IP40 protection classification indicates protection against the ingress of solid objects larger than 1 mm, but does not provide a rated level of protection against water ingress. The PDLG1850 is therefore intended for suitable indoor switchboard applications where the overall enclosure configuration meets the required environmental and installation conditions.
The ABB System pro E Power range is designed to support modular low-voltage distribution assemblies. The PDLG1850 integrates with compatible enclosure uprights and mounting arrangements, providing a practical door solution for switchboard construction. Its reversible configuration, four-hinge fixing system and 135° opening capability support convenient installation and maintenance access.
For installations requiring an IP41 enclosure configuration, the appropriate ABB top sealing components must be selected according to the complete switchboard design. The final ingress protection rating depends on the correctly assembled enclosure, including its door, side panels, roof, base and associated sealing accessories.
Typical Applications
- ABB System pro E Power low-voltage distribution switchboards.
- Main electrical distribution boards in industrial facilities.
- Commercial building electrical distribution cabinets.
- Industrial switchgear and power distribution assemblies.
- Electrical panels requiring visible internal equipment indicators.
- Switchboard manufacturing and electrical panel building.
- Factory electrical distribution and plant infrastructure.
- Modular electrical enclosures in industrial automation installations.
- Switchboard refurbishment and replacement of compatible enclosure doors.
- OEM electrical distribution equipment and engineered switchboard assemblies.
Frequently Asked Questions
What is the ABB PDLG1850 used for?
The ABB PDLG1850 is an IP40 glass door designed for compatible ABB System pro E Power low-voltage electrical switchboards. It provides protective enclosure access while allowing visual inspection of installed electrical equipment through its glazed viewing area.
What are the dimensions of the ABB PDLG1850?
The PDLG1850 has nominal dimensions of 1800 mm in height and 500 mm in width. It is designed for compatible ABB System pro E Power switchboard compartments with these nominal dimensions.
What does the IP40 rating mean?
An IP40 protection rating indicates protection against solid objects larger than 1 mm, including protection against access to hazardous parts with a wire, but provides no rated protection against water ingress. The complete switchboard must be correctly assembled to achieve its specified enclosure protection rating.
Can the ABB PDLG1850 be installed with left-hand or right-hand hinges?
Yes. The PDLG1850 features a reversible door arrangement, allowing the handle and hinges to be configured for either left-hand or right-hand opening. The supplied mounting components support flexible installation on compatible enclosure structures.
What mounting accessories are included with the ABB PDLG1850?
The door assembly includes four hinges, four closing brackets with covers and a handle. The door arrangement also incorporates four rubber overlapping plugs. The hinges are designed to be screwed onto compatible System pro E Power enclosure uprights.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power enclosure components provide electrical contractors, industrial engineers and professional switchboard manufacturers with modular solutions for low-voltage power distribution assemblies. The ABB PDLG1850 IP40 glass door combines robust construction, convenient equipment visibility and flexible installation to support dependable electrical enclosure design and maintenance access.
