Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PDLG2070 (1STQ009405A0000) is a System pro E Power IP40 glass enclosure door measuring 2000 mm high by 750 mm wide for compatible low-voltage main distribution switchboards.
£941.75
The ABB PDLG2070 is a dedicated IP40 glass door designed for ABB System pro E Power low-voltage main distribution switchboards. Identified by ABB order code 1STQ009405A0000, this enclosure accessory features a nominal height of 2000 mm and width of 750 mm, providing a glazed door arrangement for compatible modular switchboard structures.
As part of the ABB System pro E Power enclosure accessory range, the PDLG2070 supports electrical distribution assemblies requiring a glass-fronted door and an IP40 protection configuration. Unlike a solid blind door, its glazed design provides a viewing area that allows suitably positioned internal equipment, indicators and device fronts to be observed without routinely opening the enclosure.
Designed for professional electrical panel builders, switchboard manufacturers and distribution engineers, the PDLG2070 provides a manufacturer-designated solution for 2000 mm high × 750 mm wide switchboard arrangements. It supports modular enclosure construction where door dimensions, equipment visibility, access requirements and associated mounting components must be coordinated with the complete ABB System pro E Power assembly.
The ABB PDLG2070 glass door provides a dedicated external enclosure component for compatible System pro E Power main distribution switchboards. Its glazed configuration allows personnel to observe suitably positioned internal indicators, equipment fronts and other visible components while the door remains closed. This is particularly useful in distribution installations where routine visual checks form part of operational procedures.
The PDLG2070 is specified for an IP40 enclosure configuration. Under IEC 60529, IP40 indicates protection against access with a wire and ingress of solid foreign objects measuring 1 mm or larger. The second digit, zero, means that no protection against water ingress is specified by the IP40 classification. The degree of protection applies to a correctly assembled enclosure rather than to the glass door independently.
With nominal dimensions of 2000 mm high × 750 mm wide, the PDLG2070 must be matched to the corresponding ABB System pro E Power enclosure arrangement. Installers should verify the compatible frame, door mounting hardware, operating components and any required locking accessories against the relevant ABB assembly instructions. The final enclosure protection, mechanical integrity and electrical safety depend on the complete switchboard design and verification.
The glass viewing area supports visual observation only. It does not replace safe isolation, electrical testing or authorised access procedures when inspection, adjustment or maintenance requires interaction with internal electrical equipment.
| Product series | System pro E Power |
|---|---|
| Manufacturer part number | 1STQ009405A0000 |
| Product type | Glass door |
| Accessory category | Switchboard enclosure doors |
| Door configuration | Glazed / viewing door |
| Specified degree of protection | IP40 |
| Nominal height | 2000 mm |
| Nominal width | 750 mm |
| Nominal dimensions | 2000 mm × 750 mm (H × W) |
| Primary function | Glazed external closure for a compatible switchboard compartment |
| Viewing provision | Glass section for visual inspection |
| Installation location | Compatible switchboard enclosure opening |
| Compatible switchboard system | ABB System pro E Power |
| Switchboard category | Main distribution boards |
| Application | Low-voltage electrical distribution assemblies |
| Ingress protection reference | IEC 60529, applicable to the completed enclosure |
| Assembly design reference | IEC/EN 61439 series, applicable to the complete verified switchboard assembly |
The ABB PDLG2070 is an IP40 glass door designed for compatible ABB System pro E Power low-voltage main distribution switchboards. It provides an external enclosure closure with a glazed viewing area for observing suitably positioned internal electrical equipment.
The PDLG2070 has nominal dimensions of 2000 mm high × 750 mm wide. It is intended for corresponding enclosure configurations within the ABB System pro E Power modular switchboard range.
The PDLG2070 is specified for an IP40 enclosure configuration. Under IEC 60529, IP40 indicates protection against solid foreign objects measuring 1 mm or larger, but it does not specify protection against water ingress. The completed switchboard must be correctly assembled to achieve its intended protection rating.
Both products are System pro E Power glazed doors with nominal dimensions of 2000 mm × 750 mm. The PDLG2070, order code 1STQ009405A0000, is specified for IP40 enclosure arrangements, while the PDLG2076, order code 1STQ009404A0000, is specified for IP65 arrangements. The correct door should be selected according to the required enclosure protection and ABB compatibility documentation.
No. The PDLG2070 is an individual glass enclosure door accessory. Achieving IP40 protection depends on the complete compatible enclosure, including its frame, glazing interfaces, mounting arrangements, panels, covers and other installed components.
ABB System pro E Power enclosure accessories support professional switchboard manufacturers, electrical panel builders and distribution engineers in constructing modular low-voltage distribution assemblies with coordinated enclosure components, defined protection requirements and practical equipment access and viewing arrangements.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.