Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PDLG2076 (1STQ009404A0000) is a System pro E Power IP65 glazed enclosure door measuring 2000 mm high by 750 mm wide for compatible low-voltage main distribution switchboards.
£984.60
The ABB PDLG2076 is a dedicated IP65 glazed door designed for ABB System pro E Power low-voltage main distribution switchboards. Identified by ABB order code 1STQ009404A0000, this enclosure accessory features a nominal height of 2000 mm and width of 750 mm, providing a glazed door configuration for compatible modular switchboard structures.
As part of the ABB System pro E Power enclosure accessory range, the PDLG2076 supports electrical distribution assemblies requiring a glazed external door and an IP65 protection configuration. Unlike a blind door, its glazed design provides a viewing area, allowing visual inspection of suitably positioned internal equipment without routinely opening the enclosure.
Designed for professional electrical panel builders, switchboard manufacturers and industrial distribution engineers, the PDLG2076 offers a manufacturer-designated solution for 2000 mm high × 750 mm wide switchboard arrangements. It supports modular enclosure construction where door dimensions, equipment visibility, environmental protection and associated mounting components must be coordinated with the complete System pro E Power assembly.
The ABB PDLG2076 glazed door provides a dedicated external enclosure component for compatible System pro E Power main distribution switchboards. Its glazed configuration allows personnel to view suitably positioned internal indicators, equipment fronts or other visible components without routinely opening the door. This can be useful in distribution installations where regular visual checks form part of operational procedures.
The PDLG2076 is specified for an IP65 enclosure configuration. Under IEC 60529, IP65 denotes protection against dust ingress and water jets. Achieving this degree of protection depends on the complete enclosure, including compatible door seals, frame interfaces, glazing arrangements, panels and other installation components. The individual glazed door does not independently establish an IP65 rating for the finished switchboard.
With nominal dimensions of 2000 mm high × 750 mm wide, the PDLG2076 must be matched to the corresponding ABB System pro E Power enclosure arrangement. Installers should verify the applicable mounting hardware, door operating components, sealing arrangements and any required locking accessories using the relevant ABB assembly documentation. Final enclosure protection, mechanical integrity and electrical safety depend on the complete switchboard design and verification.
The glazed viewing area supports visual observation only. It does not replace safe isolation, electrical testing or authorised access procedures when inspection, adjustment or maintenance requires interaction with internal equipment.
| Product series | System pro E Power |
|---|---|
| Manufacturer part number | 1STQ009404A0000 |
| Product type | Glazed door |
| Accessory category | Switchboard enclosure doors |
| Door configuration | Glazed / viewing door |
| Specified degree of protection | IP65 |
| Nominal height | 2000 mm |
| Nominal width | 750 mm |
| Nominal dimensions | 2000 mm × 750 mm (H × W) |
| Primary function | Glazed external closure for a compatible switchboard compartment |
| Viewing provision | Glazed section for visual inspection |
| Installation location | Compatible switchboard enclosure opening |
| Compatible switchboard system | ABB System pro E Power |
| Switchboard category | Main distribution boards |
| Application | Low-voltage electrical distribution assemblies |
| Ingress protection reference | IEC 60529, applicable to the completed enclosure |
| Assembly design reference | IEC/EN 61439 series, applicable to the complete verified switchboard assembly |
The ABB PDLG2076 is an IP65 glazed door designed for compatible ABB System pro E Power low-voltage main distribution switchboards. It provides an external enclosure closure with a glazed viewing area for observing suitably positioned internal equipment.
The PDLG2076 has nominal dimensions of 2000 mm high × 750 mm wide. It is intended for corresponding enclosure configurations within the ABB System pro E Power modular switchboard range.
The PDLG2076 is specified for an IP65 enclosure configuration. Under IEC 60529, IP65 indicates dust-tight protection and protection against water jets. The complete switchboard enclosure must be correctly assembled and verified to achieve the specified degree of protection.
A glazed door, such as the PDLG2076, incorporates a viewing area that allows suitably positioned internal equipment to be observed while the door remains closed. A blind door has a solid, non-glazed configuration. The correct type depends on the required equipment visibility, enclosure arrangement and specified protection level.
No. The PDLG2076 is an individual glazed enclosure door accessory. Achieving IP65 protection depends on the complete compatible enclosure, including its door seals, glazing interfaces, frame, panels, covers and other installed components.
ABB System pro E Power enclosure accessories support professional switchboard manufacturers, electrical panel builders and distribution engineers in constructing modular low-voltage distribution assemblies with coordinated enclosure components, defined protection requirements and practical equipment access and viewing arrangements.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.