Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PDLG1870 (1STQ009397A0000) is an IP40 glass enclosure door designed for nominal 1800 mm high and 750 mm wide ABB System pro E Power low-voltage switchboards, providing a glazed front closure for visual inspection of internal equipment.
£888.22
The ABB PDLG1870 (1STQ009397A0000) is a dedicated IP40 glass door designed for compatible ABB System pro E Power low-voltage electrical distribution switchboards. Specified for a nominal enclosure height of 1800 mm and width of 750 mm, this door accessory provides a practical solution for enclosing switchboard equipment while allowing visual inspection of the components behind the door.
As part of the ABB System pro E Power range, the PDLG1870 supports professional switchboard construction by combining a glazed viewing area with an enclosure door function. The transparent section allows operators and maintenance personnel to observe compatible internal equipment without routinely opening the switchboard, helping support efficient visual checks and an organised electrical installation.
Designed for IP40 enclosure configurations, the PDLG1870 is suitable for indoor low-voltage distribution applications where protection against access to hazardous parts and the ingress of solid foreign objects is required. Its nominal 1800 mm × 750 mm format makes it a designated door option for appropriately configured System pro E Power switchboard structures.
Electrical distribution switchboards often contain circuit breakers, measuring instruments and other equipment that benefit from routine visual inspection. The ABB PDLG1870 IP40 glass door provides a glazed front closure for compatible 1800 mm high × 750 mm wide System pro E Power enclosures. By allowing equipment to remain visible behind a closed door, it supports convenient observation while helping maintain the intended enclosure arrangement.
The IP40 classification indicates protection against solid foreign objects of 1 mm diameter or greater and the associated protection against access to hazardous parts, but does not indicate protection against water ingress. The finished switchboard's protection rating depends on the complete enclosure construction, correctly selected accessories and installation in accordance with ABB instructions. The PDLG1870 should therefore be specified together with the appropriate enclosure structure and any required door mounting or closing components.
| Product series | System pro E Power |
|---|---|
| ABB order code | 1STQ009397A0000 |
| Product type | Glass enclosure door |
| Product category | Electrical switchboard doors and enclosure accessories |
| Door configuration | Glazed / transparent viewing area |
| Specified protection classification | IP40 |
| Nominal enclosure height | 1800 mm |
| Nominal enclosure width | 750 mm |
| Door location | Front of compatible switchboard enclosure |
| Compatible enclosure system | ABB System pro E Power |
| Installation function | Enclosure closure and visual inspection access |
| Application | Low-voltage main distribution switchboards |
| Protection against solid objects | IP4X classification, subject to correct assembly |
| Water ingress protection | No water protection indicated by IP40 |
| Equipment function | Mechanical enclosure protection |
The ABB PDLG1870 is an IP40 glass door designed for compatible ABB System pro E Power low-voltage distribution switchboards. It provides a front enclosure closure with a transparent viewing area for observing installed equipment.
The PDLG1870 is specified for a nominal enclosure height of 1800 mm and width of 750 mm. These are the designated switchboard configuration dimensions and should not be treated as verified external measurements of the door itself.
IP40 indicates protection against solid foreign objects of 1 mm diameter or greater, together with the corresponding protection against access to hazardous parts. The second digit, zero, indicates no specified protection against water ingress. The complete enclosure must be correctly assembled to achieve its intended rating.
Yes. The PDLG1870 has a glazed viewing area that allows visual observation of suitably positioned equipment behind the closed door. Visibility depends on the arrangement of components inside the switchboard.
The PDLG1870 is specified as an IP40 glass door, and IP40 does not provide a water ingress protection rating. It should not be relied upon for exposed outdoor or wet environments without an appropriately designed protective installation.
ABB System pro E Power enclosure accessories support professional low-voltage switchboard construction through coordinated modular door and panel solutions. The PDLG1870 (1STQ009397A0000) provides an IP40 glass door option for nominal 1800 mm × 750 mm enclosure configurations, combining practical equipment visibility with a professional front enclosure finish for compatible industrial and commercial power distribution installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.