Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PDLG1876 (1STQ009396A0000) is an IP65 glazed enclosure door with a nominal height of 1800 mm and width of 750 mm, designed for compatible ABB System Pro E Power modular low-voltage electrical switchboards.
£931.03
The ABB PDLG1876 (1STQ009396A0000) is a specialist IP65 glazed door for low-voltage electrical switchboards, designed for the ABB System Pro E Power modular enclosure range. Specified with a nominal height of 1800 mm and width of 750 mm, this door combines a glazed viewing arrangement with a high level of ingress protection for compatible electrical distribution cabinets.
As part of ABB's System Pro E Power product family, the PDLG1876 provides a dedicated enclosure door solution for installations where visibility of internal equipment is desirable without routinely opening the switchboard. The glazed design can facilitate visual inspection of suitably positioned instruments, indicators and electrical equipment, while the door forms part of the enclosure's protective barrier. Its IP65 designation makes it particularly relevant to switchboard configurations requiring enhanced protection against dust and water ingress.
Identified by ABB manufacturer order code 1STQ009396A0000, the PDLG1876 is intended for professional electrical panel manufacturers, switchboard assemblers and maintenance applications. Its 1800 mm nominal height, 750 mm nominal width, glazed door construction and IP65 protection designation are the principal selection characteristics. The door should be installed with the appropriate System Pro E Power enclosure structure, sealing arrangement and compatible mounting hardware in accordance with ABB's assembly instructions.
Glazed switchboard doors are useful where electrical equipment must remain enclosed while selected instruments, indicators or other components are visually monitored. The ABB PDLG1876 provides a dedicated glazed door configuration for compatible System Pro E Power assemblies with a nominal height of 1800 mm and width of 750 mm. The viewing arrangement can support routine visual checks without unnecessary door opening, provided the relevant equipment is positioned within the visible area. This can be particularly useful in electrical distribution installations where maintaining the intended enclosure condition during normal operation is important.
The IP65 designation indicates a high level of protection against environmental ingress: the first digit, 6, denotes dust-tight protection, while the second digit, 5, denotes protection against water jets. IP65 does not mean the enclosure is suitable for immersion or high-pressure washdown. The stated protection level must be considered in the context of the complete switchboard assembly, including the enclosure structure, door seals, hinges, fastening arrangements, cable entries and other openings. Correct installation and verification against ABB's applicable documentation are essential to achieving the required protection characteristics.
| Product designation | PDLG1876 |
|---|---|
| ABB order code | 1STQ009396A0000 |
| Product range | System Pro E Power |
| Product group | System Pro E Power |
| Product type | Glazed door |
| Accessory category | Low-voltage switchboard enclosure door |
| Door configuration | Glazed / viewing door |
| Ingress protection designation | IP65 |
| Solid-object protection | Dust-tight, subject to the complete correctly assembled enclosure |
| Water ingress protection | Protection against water jets, subject to the complete correctly assembled enclosure |
| Nominal door height | 1800 mm |
| Nominal door width | 750 mm |
| Primary function | Protective enclosure closure with glazed viewing provision |
| Compatible switchboard system | ABB System Pro E Power |
| Application | Low-voltage electrical distribution switchboards |
| Installation type | Compatible modular switchboard door assembly |
The ABB PDLG1876 is an IP65 glazed door designed for compatible ABB System Pro E Power low-voltage switchboards. It provides a protective enclosure closure with a viewing arrangement and has a nominal height of 1800 mm and width of 750 mm.
The ABB PDLG1876 has a specified nominal height of 1800 mm and nominal width of 750 mm. These are the manufacturer's stated door configuration dimensions, not the overall external dimensions of a completed switchboard or its packaging.
The IP65 designation indicates dust-tight protection and protection against water jets. It does not indicate suitability for immersion. The completed switchboard must be correctly assembled and verified to achieve the intended ingress protection rating.
A glazed door, such as the PDLG1876, incorporates a viewing arrangement that can allow observation of suitably positioned internal equipment. A blind door has a solid front without a viewing window. The appropriate choice depends on the enclosure design, visibility requirements and specified protection rating.
The PDLG1876 belongs to the ABB System Pro E Power modular low-voltage switchboard range. It is specified as an IP65 glazed door with a nominal height of 1800 mm and width of 750 mm. Compatibility with a particular enclosure, sealing arrangement and mounting hardware should be confirmed against the applicable ABB assembly documentation.
ABB System Pro E Power provides a modular platform for professional low-voltage electrical distribution switchboards. The PDLG1876 IP65 glazed door supports compatible enclosure assemblies requiring a viewing arrangement, enhanced ingress protection and a nominal door size of 1800 mm by 750 mm, helping panel builders select manufacturer-specified components for industrial and commercial electrical distribution installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.