Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ009376A0000 ABB PDLB1826 System pro E Power IP65 Blind Door 1800 x 250 mm
ABB PDLB1826 is a System pro E Power IP65-compatible blind enclosure door measuring 1800 mm high and 250 mm wide, designed for compatible low-voltage electrical switchboards.
£291.69
Why Choose the ABB PDLB1826 IP65 Blind Door?
The ABB PDLB1826 is a purpose-designed IP65 blind enclosure door for compatible ABB System pro E Power low-voltage switchboards. Featuring a nominal height of 1800 mm and width of 250 mm, this solid-front door provides a dedicated external closure solution for modular electrical distribution assemblies.
As part of the ABB System pro E Power modular switchboard range, the PDLB1826 supports professional enclosure construction by providing a blind door configuration without a viewing window. Its solid design helps enclose internal electrical equipment while maintaining a clean, consistent external appearance across compatible switchboard sections.
Designed for IP65 enclosure configurations, the PDLB1826 is suitable for electrical distribution installations requiring protection against dust ingress and water jets when correctly assembled with compatible sealing, fastening and enclosure components. Its 1800 × 250 mm nominal dimensions make it suitable for appropriately configured System pro E Power switchboard sections.
Key Advantages
- Purpose-designed blind enclosure door for ABB System pro E Power switchboards.
- IP65 protection configuration for compatible electrical enclosures.
- 1800 mm nominal height for the specified switchboard arrangement.
- 250 mm nominal width for compatible narrow enclosure sections.
- Solid-front blind design without a viewing window.
- Supports protection of internal electrical equipment against environmental exposure.
- Provides a professional external appearance for modular switchboard assemblies.
- Compatible with the modular construction principles of ABB System pro E Power.
- Suitable for industrial and commercial low-voltage distribution installations.
Key Features
- ABB System pro E Power enclosure door.
- Blind door configuration.
- IP65 enclosure application.
- 1800 mm nominal door height.
- 250 mm nominal door width.
- Solid external closure without a transparent viewing section.
- Designed for compatible modular low-voltage switchboard assemblies.
- Supports enclosure protection when correctly installed with suitable sealing components.
- Suitable for professional electrical panel manufacturing and enclosure construction.
- Identified by ABB model PDLB1826 and order code 1STQ009376A0000.
Technical Specifications
- Manufacturer: ABB
- Product model: PDLB1826
- ABB order code: 1STQ009376A0000
- Product family: System pro E Power
- ABB product group: System Pro E Power
- Product type: Blind enclosure door
- Door configuration: Solid blind door
- Intended enclosure protection rating: IP65
- Nominal height: 1800 mm
- Nominal width: 250 mm
- Nominal dimensions (H × W): 1800 × 250 mm
- Installation arrangement: External switchboard door
- Compatible switchboard system: ABB System pro E Power
- Application: External closure of compatible low-voltage switchboard sections
- Installation environment: Industrial and commercial electrical distribution assemblies
IP65 Blind Door Protection for Modular Electrical Switchboards
Enclosure doors are essential components of low-voltage switchboard construction, providing access to internal equipment while contributing to the protective boundary of the electrical assembly. Blind doors feature a solid external surface without a viewing window, making them suitable for installations where a closed-front appearance and protected equipment compartment are required.
The ABB PDLB1826 is designed for compatible System pro E Power IP65 enclosure arrangements. Its specified 1800 mm height and 250 mm width support integration into appropriately configured switchboard sections, while its blind construction provides a dedicated external door solution for modular electrical distribution equipment.
An IP65 rating indicates a dust-tight enclosure and protection against water jets when the complete assembly meets the relevant requirements of IEC 60529. The PDLB1826 is intended for IP65 configurations, but the final protection level depends on correct installation, suitable seals, compatible enclosure components and the complete switchboard design.
Typical Applications
- ABB System pro E Power low-voltage switchboards.
- Blind door installations in compatible IP65 electrical enclosures.
- Modular switchboard sections requiring 1800 × 250 mm nominal doors.
- Industrial electrical power distribution cabinets.
- Commercial building main and sub-distribution boards.
- Electrical installations requiring dust-tight enclosure configurations.
- Professional electrical panel manufacturing and switchboard construction.
- Compatible enclosure maintenance, refurbishment and door replacement applications.
Frequently Asked Questions
What is the ABB PDLB1826 used for?
The ABB PDLB1826 is a blind enclosure door designed for compatible ABB System pro E Power low-voltage switchboards, providing a solid external closure for specified IP65 enclosure arrangements.
What are the dimensions of the ABB PDLB1826?
The PDLB1826 has a nominal height of 1800 mm and width of 250 mm, giving specified dimensions of 1800 × 250 mm (H × W).
What does IP65 mean for the ABB PDLB1826?
IP65 indicates protection against dust ingress and water jets for a correctly assembled and tested enclosure. The PDLB1826 is intended for IP65 configurations, with the final rating dependent on the complete switchboard assembly and correct installation.
What is the difference between a blind door and a glazed door?
A blind door has a solid front without a viewing window, whereas a glazed door includes a transparent viewing section. The PDLB1826 is the blind door version for compatible System pro E Power switchboards.
Does the ABB PDLB1826 include a complete electrical enclosure?
No. The PDLB1826 is an individual enclosure door, not a complete switchboard cabinet. A finished enclosure requires compatible structural components, panels, appropriate door fittings and any necessary sealing accessories according to the installation design.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power enclosure accessories support electrical engineers and professional switchboard manufacturers with modular solutions for low-voltage distribution assemblies. The PDLB1826 provides a dedicated 1800 × 250 mm blind door for compatible IP65 switchboard configurations, supporting protected, organised and professionally finished electrical distribution cabinets.
