Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PCCM2075 (1STQ009357A0000) is a System pro E Power CombiLine height adapter for nominal 2000 mm high and 750 mm wide low-voltage switchboard installations, providing 50 mm top-and-bottom height compensation when used in the specified two-piece arrangement.
£64.25
The ABB PCCM2075 (1STQ009357A0000) is a dedicated CombiLine height adapter designed for integrating compatible ABB CombiLine modular distribution assemblies into System pro E Power low-voltage switchboards. Specified for a nominal installation height of 2000 mm and width of 750 mm, this accessory provides a coordinated solution for adapting CombiLine sections to the required enclosure configuration.
As part of the ABB System pro E Power range, the PCCM2075 is intended for use where CombiLine modular distribution equipment is installed within a compatible switchboard structure. Its height-compensation design provides 50 mm covering sections at the top and bottom of the CombiLine installation, helping achieve a complete and organised internal arrangement.
The PCCM2075 is identified in ABB's CombiLine accessory range as a 750 mm wide adapter configuration for 2000 mm high installations. It is designed for professional electrical panel builders who require manufacturer-specified adaptation components rather than improvised filler panels. The appropriate adapter quantity, mounting frame and fixing accessories must be selected according to the complete switchboard design.
Integrating modular electrical distribution equipment into larger switchboard structures requires correctly matched mounting and adaptation components. The ABB PCCM2075 CombiLine adapter provides a dedicated height-compensation solution for nominal 2000 mm high × 750 mm wide installations. Its 50 mm covering sections help accommodate the dimensional relationship between the CombiLine assembly and the surrounding System pro E Power structure.
The ABB System pro E Power platform supports modular low-voltage switchboard construction using coordinated enclosure, mounting and distribution accessories. The PCCM2075 is intended to work alongside the appropriate CombiLine mounting frame, fixing set and structural components. For a complete top-and-bottom adaptation arrangement, ABB specifies two adapter pieces per section. Correct installation and final compatibility depend on the selected CombiLine equipment, enclosure dimensions and applicable ABB assembly instructions.
| Product series | System pro E Power |
|---|---|
| ABB order code | 1STQ009357A0000 |
| Product type | CombiLine height adapter |
| Product category | Main distribution board mounting and adaptation accessory |
| Nominal installation height | 2000 mm |
| Nominal installation width | 750 mm |
| Height compensation | 50 mm at the top and 50 mm at the bottom of the complete arrangement |
| Required adapter arrangement | 2 pieces per CombiLine section |
| Adapter function | Mechanical height compensation and covering |
| Compatible modular system | ABB CombiLine |
| Compatible enclosure platform | ABB System pro E Power |
| Installation location | Upper and lower CombiLine section positions |
| Associated components | Compatible CombiLine mounting frame and fixing accessories |
| Mounting application | Modular distribution assembly adaptation |
| Application | Low-voltage main distribution switchboards |
| Equipment function | Mechanical adaptation, not electrical protection |
The ABB PCCM2075 is a CombiLine height adapter used to integrate compatible modular distribution assemblies into ABB System pro E Power switchboards. It provides dedicated height-compensation covering for the designated CombiLine installation arrangement.
The PCCM2075 is specified for a nominal installation height of 2000 mm and width of 750 mm. These are the intended switchboard configuration dimensions, not the overall physical measurements of an individual adapter component.
The PCCM2075 is designed to provide 50 mm height-compensation covering at the upper and lower positions of a compatible CombiLine section, using the required adapter arrangement.
ABB's CombiLine installation information specifies two adapter pieces per section to complete the top-and-bottom height-compensation arrangement. The supplied quantity should be checked when ordering.
No. The PCCM2075 is a mechanical adaptation accessory. The CombiLine mounting frame, fixing set, electrical modules and other required switchboard components must be selected separately according to the complete assembly design.
ABB System pro E Power accessories support professional low-voltage switchboard construction through coordinated modular mounting and adaptation solutions. The PCCM2075 (1STQ009357A0000) provides a dedicated CombiLine height-compensation solution for nominal 2000 mm high and 750 mm wide installations, helping electrical panel builders achieve organised modular distribution layouts in industrial and commercial power distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.