Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PCCM2050 (1STQ009356A0000) is a two-piece System pro E Power CombiLine height adapter kit for nominal 2000 mm high and 500 mm wide modular distribution installations, providing 50 mm upper and lower height compensation.
£42.85
The ABB PCCM2050 (1STQ009356A0000) is a dedicated CombiLine height adapter kit designed for integrating compatible CombiLine modular distribution assemblies into ABB System pro E Power low-voltage switchboards. Specified for a nominal installation height of 2000 mm and width of 500 mm, this accessory provides a coordinated adaptation solution for professional electrical panel builders.
As part of the ABB System pro E Power range, the PCCM2050 supports the installation of CombiLine modules within compatible modular switchboard structures. Its principal function is to compensate for the difference between the available enclosure height and the CombiLine mounting arrangement, providing dedicated 50 mm high adaptation sections at the top and bottom of the assembly.
The PCCM2050 is supplied as a two-piece adapter set for the designated 500 mm wide CombiLine configuration. By using manufacturer-specified adaptation components, switchboard manufacturers can achieve a consistent internal arrangement while retaining the flexibility of the ABB modular power distribution platform.
Integrating modular distribution equipment into larger low-voltage switchboards requires correctly matched mounting and adaptation components. The ABB PCCM2050 CombiLine adapter provides a dedicated solution for a nominal 2000 mm high × 500 mm wide installation, compensating for the required height difference with adapter sections positioned at the top and bottom of the CombiLine arrangement. This supports consistent mechanical integration without relying on non-standard filler components.
The ABB System pro E Power platform allows electrical panel builders to combine compatible modular distribution equipment with coordinated enclosure structures. The PCCM2050 is intended to work alongside the appropriate CombiLine mounting frame, fixing set and structural accessories. It provides a mechanical adaptation function and does not replace the mounting frame, electrical protection devices or other components required for a complete assembly. Final compatibility and installation must follow the relevant ABB switchboard configuration and assembly instructions.
| Product series | System pro E Power |
|---|---|
| ABB order code | 1STQ009356A0000 |
| Product type | CombiLine height adapter kit |
| Product category | Main distribution board mounting and adaptation accessory |
| Nominal installation height | 2000 mm |
| Nominal installation width | 500 mm |
| Height compensation | 50 mm at the top and 50 mm at the bottom |
| Adapter quantity | 2 pieces |
| Net product width | 70 mm |
| Net product height | 55 mm |
| Net product depth | 550 mm |
| Net product weight | 1.38 kg |
| Compatible mounting system | ABB CombiLine |
| Compatible enclosure platform | ABB System pro E Power |
| Installation function | Mechanical height adaptation for CombiLine modules |
| Mounting application | Upper and lower CombiLine section adaptation |
| Associated accessory family | CombiLine mounting frames and fixing sets |
| Application | Low-voltage main distribution switchboards |
| EAN | 8015646804891 |
The ABB PCCM2050 is a CombiLine height adapter kit used to integrate compatible CombiLine modular distribution assemblies into ABB System pro E Power switchboards. It provides the required upper and lower height compensation for the designated installation configuration.
The PCCM2050 is specified for a nominal installation height of 2000 mm and width of 500 mm. These values identify the intended CombiLine installation configuration rather than the physical dimensions of an individual adapter component.
The PCCM2050 is supplied as a two-piece adapter set. The components are intended to provide 50 mm height compensation at the top and bottom of the compatible CombiLine section.
Yes. The PCCM2050 belongs to the ABB System pro E Power accessory range and is designed for compatible CombiLine integration arrangements. The correct mounting frame, fixing components and enclosure structure must also be selected for the complete installation.
No. The PCCM2050 is a mechanical height adapter kit. CombiLine mounting frames, fixing sets, electrical modules and other necessary switchboard components must be selected separately according to the intended assembly.
ABB System pro E Power accessories support professional low-voltage switchboard construction through coordinated modular mounting and adaptation solutions. The PCCM2050 (1STQ009356A0000) provides a dedicated two-piece CombiLine height adapter arrangement for nominal 2000 mm high and 500 mm wide installations, helping electrical panel builders integrate compatible modular distribution equipment into organised industrial and commercial power distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.