Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ009287A0000 ABB PRBE2233 Emax 2 E2.2 3P Withdrawable Installation Kit Reduced Vertical 400 mm System Pro E Power
ABB PRBE2233 (1STQ009287A0000) is a reduced vertical installation kit with a nominal width of 400 mm, designed for compatible ABB Emax 2 E2.2 three-pole withdrawable air circuit breakers in System Pro E Power low-voltage switchboards.
£320.99
Why Choose the ABB PRBE2233 E2.2 Withdrawable Circuit Breaker Installation Kit?
The ABB PRBE2233 (1STQ009287A0000) is a specialist three-pole withdrawable circuit breaker installation kit designed for the ABB Emax 2 E2.2 air circuit breaker range within ABB System Pro E Power low-voltage switchboards. Specified for a reduced vertical configuration with a nominal width of 400 mm, this accessory supports the integration of compatible withdrawable circuit breaker assemblies into modular electrical distribution systems.
The PRBE2233 is intended for switchboard builders and electrical panel manufacturers requiring an installation kit matched to the E2.2 breaker frame, three-pole arrangement and withdrawable execution. Its dedicated configuration helps simplify component selection during the design and assembly of compatible System Pro E Power switchboards. By using an accessory specified for the intended breaker arrangement, installers can follow ABB's coordinated modular assembly approach.
Identified by ABB manufacturer order code 1STQ009287A0000, the PRBE2233 is specifically designated as an E2.2 3P withdrawable kit, vertical reduced, W=400 mm. It is an installation accessory rather than a complete circuit breaker, and should be selected alongside the appropriate Emax 2 equipment, withdrawable components and System Pro E Power enclosure configuration in accordance with ABB's assembly instructions.
Key Advantages
- Dedicated E2.2 compatibility: Designed for compatible ABB Emax 2 E2.2 air circuit breaker installations.
- Withdrawable execution: Specified for three-pole withdrawable circuit breaker configurations rather than fixed-mounted arrangements.
- Reduced vertical configuration: Supports the designated vertical reduced installation layout within compatible System Pro E Power assemblies.
- 400 mm nominal width: Matches the width requirement stated for this specific installation kit.
- System integration: Belongs to ABB's System Pro E Power modular low-voltage switchboard accessory range.
- Accurate component selection: Clear manufacturer identification helps distinguish the kit from other E2.2 mounting configurations.
- Professional assembly: Suitable for switchboard manufacturing, equipment integration and compatible installation refurbishment projects.
Key Features
- Genuine ABB System Pro E Power switchboard installation accessory.
- Manufacturer model reference: PRBE2233.
- ABB ordering reference: 1STQ009287A0000.
- Designed for the ABB Emax 2 E2.2 circuit breaker frame.
- Specified for three-pole (3P) circuit breaker arrangements.
- Designed for withdrawable circuit breaker execution.
- Intended for a vertical reduced installation configuration.
- Specified nominal installation width of 400 mm.
- Supports integration of compatible air circuit breaker equipment into modular electrical distribution switchboards.
- Part of the ABB accessory range for application-specific System Pro E Power assembly configurations.
Purpose-Designed Integration for Emax 2 Withdrawable Circuit Breakers
Withdrawable air circuit breaker arrangements are used in low-voltage power distribution installations where the circuit breaker must be capable of being moved between its designated operating and disconnected positions using the appropriate withdrawable assembly. This configuration can support planned inspection, maintenance and equipment replacement procedures when performed in accordance with the manufacturer's instructions and site safety requirements. The ABB PRBE2233 is specifically identified for the Emax 2 E2.2 three-pole withdrawable configuration, making it distinct from installation kits intended for fixed circuit breakers.
The kit's reduced vertical arrangement and 400 mm nominal width are important selection parameters when designing a compatible System Pro E Power switchboard. Panel builders should confirm the complete mechanical assembly, breaker execution, associated withdrawable equipment, electrical connections and required clearances using the applicable ABB documentation. The PRBE2233 does not itself determine the switchboard's current rating, short-circuit withstand performance, ingress protection or other electrical characteristics; these depend on the complete verified assembly and the equipment installed.
Typical Applications
- ABB System Pro E Power switchboards: Installation of compatible Emax 2 E2.2 withdrawable breaker arrangements.
- Industrial main distribution boards: Modular low-voltage power distribution assemblies incorporating three-pole air circuit breakers.
- Commercial electrical distribution: Switchboard projects requiring compatible withdrawable circuit breaker installations.
- Power distribution panel manufacturing: OEM and specialist panel-building applications using ABB modular enclosure components.
- Reduced vertical breaker arrangements: Configurations specifically designed around the 400 mm nominal installation width.
- Electrical infrastructure upgrades: Replacement or refurbishment of compatible E2.2 withdrawable installation accessories.
- Switchboard assembly projects: Integration of designated air circuit breaker compartments and associated equipment.
Technical Specifications
| Product designation | PRBE2233 |
|---|---|
| ABB order code | 1STQ009287A0000 |
| Product group | System Pro E Power |
| Product category | Low-voltage switchboard installation accessory |
| Product type | Withdrawable circuit breaker installation kit |
| Compatible circuit breaker family | ABB Emax 2 |
| Compatible circuit breaker frame | E2.2 |
| Compatible breaker type | Air circuit breaker (ACB) |
| Number of poles | 3P / three-pole |
| Circuit breaker execution | Withdrawable |
| Installation orientation | Vertical |
| Installation configuration | Reduced vertical |
| Nominal installation width | 400 mm |
| Compatible switchboard range | ABB System Pro E Power |
| Primary function | Installation and integration of compatible E2.2 withdrawable circuit breaker assemblies |
| Application | Modular low-voltage electrical distribution switchboards |
Frequently Asked Questions
What is the ABB PRBE2233 1STQ009287A0000 used for?
The ABB PRBE2233 is an installation kit designed for compatible ABB Emax 2 E2.2 three-pole withdrawable air circuit breakers within System Pro E Power low-voltage switchboards. It is specified for a reduced vertical arrangement with a nominal width of 400 mm.
Which circuit breaker configuration is compatible with the ABB PRBE2233?
The PRBE2233 is specified for the ABB Emax 2 E2.2 frame in a three-pole (3P) withdrawable configuration. The exact breaker variant, withdrawable equipment and switchboard arrangement should be checked against the applicable ABB installation documentation.
What is the difference between the ABB PRBE2233 and PRBE2232?
Both kits are specified for ABB Emax 2 E2.2 three-pole circuit breakers in reduced vertical arrangements with a nominal width of 400 mm. The PRBE2233 is for withdrawable execution, whereas the PRBE2232 is for fixed execution. They should be selected according to the intended circuit breaker installation type.
Does the ABB PRBE2233 include an Emax 2 circuit breaker?
The PRBE2233 is an installation kit, not a complete air circuit breaker. The compatible Emax 2 E2.2 circuit breaker and any additional withdrawable assembly components must be selected according to the relevant ABB product and switchboard assembly documentation.
What are the specified mounting configuration and width of the ABB PRBE2233?
The ABB PRBE2233 is specified for a reduced vertical installation configuration with a nominal width of 400 mm. It belongs to the ABB System Pro E Power modular switchboard accessory range.
ABB System Pro E Power Switchboard Components
The ABB System Pro E Power range provides a modular platform for professional low-voltage switchboard construction. The PRBE2233 E2.2 installation kit supports the integration of compatible three-pole withdrawable Emax 2 air circuit breakers into reduced vertical 400 mm configurations, helping panel builders select application-specific components for industrial and commercial electrical distribution assemblies.
