1STQ009284A0000 ABB PFRF2040 Fixed Reduced Frame H2000 W400 System pro E Power

Why Choose the ABB PFRF2040 System pro E Power Fixed Reduced Frame?

The ABB PFRF2040 (1STQ009284A0000) is a fixed reduced frame accessory for compatible ABB System pro E Power low-voltage electrical distribution switchboards. The manufacturer specifies a frame configuration with a nominal height of 2000 mm and a nominal width of 400 mm, making it a configuration-specific structural component for modular switchboard construction.

The authoritative ABB product designation, FIXED REDUCED FRAME H2000 W400, identifies the accessory's essential characteristics: a fixed frame arrangement, reduced-frame configuration, 2000 mm nominal height and 400 mm nominal width. These specifications are important when selecting structural components for the intended System pro E Power enclosure layout.

As part of the ABB System pro E Power product group, the PFRF2040 is intended for integration with compatible switchboard structures and associated mounting accessories. It supports the development of a coordinated internal mechanical arrangement where frame configuration, installation space and compatibility with adjacent components must be considered during switchboard design.

For electrical panel builders, switchboard manufacturers and maintenance engineers, the ABB PFRF2040 fixed reduced frame provides a clearly identified accessory for the specified 2000 mm by 400 mm nominal configuration. Its ABB manufacturer order code, 1STQ009284A0000, supports accurate procurement, bill-of-materials preparation, technical documentation and replacement-part identification.

Key Advantages

• Dedicated fixed reduced frame: Specifically designated for compatible ABB System pro E Power switchboard configurations.
• 2000 mm nominal height: Intended for the corresponding full-height frame arrangement.
• 400 mm nominal width: Identifies the required reduced-frame width configuration.
• Modular system integration: Supports coordinated switchboard construction using ABB System pro E Power components.
• Configuration-specific structural accessory: Helps establish the intended mechanical arrangement within a compatible enclosure.
• Fixed-frame design: Clearly distinguished from accessories intended for other frame or mounting configurations.
• Organised equipment installation: Supports the planning of compatible internal switchboard structures and associated components.
• Professional panel-building applications: Relevant to industrial, commercial and infrastructure low-voltage distribution projects.
• Accurate product identification: Referenced by model PFRF2040 and ABB order code 1STQ009284A0000.
• Technical documentation support: Suitable for inclusion in switchboard drawings, component schedules and procurement records.
• Compatible replacement identification: Provides an exact manufacturer reference for maintenance and refurbishment enquiries.

Key Features

• ABB System pro E Power modular switchboard accessory.
• PFRF2040 manufacturer model designation.
• ABB manufacturer order code: 1STQ009284A0000.
• Manufacturer designation: FIXED REDUCED FRAME H2000 W400.
• Fixed reduced frame configuration.
• 2000 mm nominal frame height.
• 400 mm nominal frame width.
• Intended for compatible low-voltage electrical distribution assemblies.
• Supports the mechanical arrangement of designated switchboard components.
• Designed for integration with appropriate ABB System pro E Power structures.
• Relevant to modular main distribution board construction.
• Suitable for new switchboard assembly and compatible frame replacement.
• Requires verification of the selected enclosure and internal layout.
• Exact physical dimensions and fixing details must be confirmed against ABB technical drawings.
• Intended for professional installation in accordance with ABB assembly instructions.

Understanding the ABB PFRF2040 Fixed Reduced Frame Design

The ABB PFRF2040 is identified by the manufacturer as a fixed reduced frame. Within a modular electrical switchboard, structural frame accessories help establish the mechanical arrangement required for the installation of compatible equipment and associated internal components.

The term fixed is part of the manufacturer's frame designation. It distinguishes the intended arrangement from other possible frame configurations, but it should not be interpreted as confirmation of compatibility with every fixed-mounted circuit-breaker or functional unit.

The term reduced frame identifies the particular structural configuration specified by ABB. It does not independently establish the frame's exact cross-sectional profile, material thickness, mounting pattern or relationship to every adjacent enclosure component.

For professional switchboard construction, selecting the correct frame accessory is important because the internal mechanical arrangement must correspond to the intended enclosure and equipment layout. Structural components should be coordinated with the appropriate supports, mounting accessories and other parts identified in the applicable ABB assembly documentation.

The PFRF2040 should therefore be treated as a manufacturer-specific structural accessory, rather than a universal mounting frame or complete switchboard enclosure.

2000 mm Height and 400 mm Width Configuration

The ABB PFRF2040 is specified for a 2000 mm nominal height and a 400 mm nominal width. Both dimensions are essential when identifying the intended System pro E Power frame configuration.

The 2000 mm nominal height identifies the vertical frame configuration stated in the manufacturer designation. This measurement is particularly important when coordinating the frame with the intended switchboard height and the position of adjacent structural components.

The 400 mm nominal width identifies the corresponding reduced-frame width configuration. It helps distinguish the PFRF2040 from frame accessories intended for wider or narrower arrangements.

These measurements are nominal configuration dimensions and should not automatically be interpreted as the exact external dimensions of the manufactured frame. Actual component dimensions, fixing positions and installation clearances should be verified against the relevant ABB technical drawings.

The supplied designation does not specify a frame depth. Compatibility with a particular enclosure depth or internal mounting arrangement must therefore be confirmed separately using ABB System pro E Power technical documentation.

Integration with ABB System pro E Power Modular Switchboards

The ABB System pro E Power platform supports the construction of modular low-voltage electrical distribution assemblies. Depending on the application, these switchboards may incorporate enclosure frames, structural supports, busbar systems, protective devices, cable connection arrangements and internal segregation accessories.

The PFRF2040 fixed reduced frame forms part of this coordinated approach to switchboard construction. Its role relates to the mechanical arrangement of compatible internal components rather than the electrical protection or switching of circuits.

When selecting the PFRF2040, panel builders should confirm that the intended enclosure requires the specified fixed reduced frame configuration with a nominal height of 2000 mm and width of 400 mm.

Compatibility must also be checked against the selected enclosure structure, neighbouring frame components and any associated mounting accessories. The manufacturer designation does not independently confirm suitability for every System pro E Power assembly or every internal equipment arrangement.

The exact ABB manufacturer order code, 1STQ009284A0000, should be recorded in the switchboard bill of materials. This helps ensure that the specified frame configuration is correctly identified during procurement, assembly and future maintenance.

Mechanical Layout, Equipment Mounting and Assembly Planning

Structural frame selection is an important stage in electrical switchboard design. The chosen arrangement must be suitable for the intended equipment layout, enclosure configuration and mechanical requirements of the completed assembly.

The ABB PFRF2040 provides the specified fixed reduced frame configuration, but its designation does not establish a universal mechanical load capacity. The suitability of the complete arrangement depends on the selected equipment, supporting components, fixing methods and applicable ABB design instructions.

Panel builders should consider the positioning of neighbouring structural elements, cable connection areas, busbar systems and functional units. Adequate installation space and access must be maintained in accordance with the requirements of the selected electrical equipment and the complete switchboard design.

The frame should not be assumed to include mounting plates, circuit-breaker supports, busbar supports, electrical devices or fixing hardware unless those items are explicitly identified in the relevant ABB product documentation.

Where the assembly requires internal segregation, the appropriate barriers and compartment components must be selected separately or as specified by the applicable ABB assembly instructions. The PFRF2040 designation does not independently establish a particular internal separation form.

IEC/EN 61439 and Complete Switchboard Verification

The IEC/EN 61439 series establishes requirements for low-voltage switchgear and controlgear assemblies. These requirements apply to the design and verification of the complete switchboard, including its enclosure, installed equipment, electrical connections and mechanical structures.

The ABB PFRF2040 is a structural switchboard accessory and should not be assigned electrical ratings that are not established by the manufacturer's specification. Its designation does not independently define rated current, rated voltage, short-circuit withstand capability or ingress protection.

The mechanical suitability of the completed switchboard must be considered together with the selected structural supports, electrical equipment and installation arrangement. Any applicable mechanical loading requirements should be checked against ABB technical documentation.

Internal separation classifications such as Form 2, Form 3 and Form 4 depend on the complete arrangement of busbars, functional units, terminals and segregation barriers. The PFRF2040 does not independently determine any particular segregation classification.

The switchboard manufacturer remains responsible for verifying the completed assembly against the applicable requirements and the relevant ABB System pro E Power assembly instructions.

Selecting and Installing the ABB PFRF2040

Before ordering the ABB PFRF2040, confirm that the intended electrical switchboard belongs to the System pro E Power range and requires the specified fixed reduced frame arrangement.

Check the nominal dimensions carefully. The PFRF2040 is designated for H2000 W400, making the 2000 mm nominal height and 400 mm nominal width essential selection criteria.

Use the ABB manufacturer order code 1STQ009284A0000 for purchasing, technical enquiries and project documentation. This helps distinguish the PFRF2040 from other System pro E Power structural accessories with different frame configurations or nominal dimensions.

Before installation, consult the applicable ABB technical documentation to confirm the correct mounting position, physical dimensions, fixing requirements, supplied components and any complementary parts required. The supplied designation does not independently establish the frame material, finish, weight or complete package contents.

Installation should be undertaken by appropriately qualified personnel following ABB's assembly instructions. The completed switchboard must be verified as a whole to confirm that its structural arrangement, mechanical suitability and electrical performance meet the project requirements.

Typical Applications

• ABB System pro E Power low-voltage electrical distribution switchboards.
• Fixed reduced frame arrangements within compatible modular enclosures.
• 2000 mm nominal height switchboard frame configurations.
• 400 mm nominal width reduced-frame arrangements.
• Industrial main distribution board construction.
• Commercial building electrical distribution assemblies.
• Modular low-voltage switchboard manufacturing.
• Internal structural frame arrangements using ABB accessories.
• Industrial electrical power distribution installations.
• OEM electrical panel-building projects.
• Switchboard assembly projects requiring manufacturer-specific structural components.
• Coordinated mounting arrangements within compatible System pro E Power enclosures.
• Extensions to existing switchboards where compatibility has been verified.
• Maintenance and refurbishment of compatible ABB modular assemblies.
• Replacement of an identified ABB PFRF2040 fixed reduced frame.