Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ009283A0000 ABB PFRF1840 Fixed Reduced Frame 1800 x 400 mm – System pro E Power
ABB PFRF1840 (1STQ009283A0000) is a System pro E Power fixed reduced frame specified for an 1800 mm height and 400 mm width, designed for compatible modular low-voltage main distribution board structures.
£166.46
Why Choose the ABB PFRF1840 Fixed Reduced Frame?
The ABB PFRF1840 is a genuine fixed reduced frame designed for the ABB System pro E Power modular low-voltage switchboard range. Specified for a 1800 mm height and 400 mm width, this structural accessory supports the construction and configuration of compatible industrial and commercial main distribution board assemblies.
As part of the ABB System pro E Power series, the PFRF1840 provides a fixed reduced-frame configuration for compatible modular switchboard structures. The frame is intended for installations requiring the specified reduced-frame arrangement, helping electrical panel builders establish a consistent structural layout within the overall distribution board assembly.
With its 1800 mm height and 400 mm width, the PFRF1840 is designed for the corresponding System pro E Power configuration. Identified by ABB order code 1STQ009283A0000, this accessory is suitable for electrical panel builders, switchboard manufacturers and industrial electrical contractors requiring manufacturer-specific components for professional low-voltage distribution board construction.
Key Advantages
- Genuine ABB System pro E Power fixed reduced frame.
- 1800 mm height and 400 mm width for the specified modular switchboard arrangement.
- Fixed-frame configuration for compatible distribution board structures.
- Reduced-frame design for applications requiring the corresponding ABB assembly arrangement.
- Supports consistent structural organisation within modular low-voltage switchboards.
- Designed for integration with compatible ABB System pro E Power components.
- Helps electrical panel builders configure switchboard structures according to project requirements.
- Suitable for industrial and commercial main distribution board construction.
- Supports professional switchboard assembly using coordinated ABB accessories.
- ABB order code 1STQ009283A0000 enables accurate identification, specification and procurement.
Key Features
- ABB System pro E Power modular switchboard accessory.
- PFRF1840 manufacturer product designation.
- ABB order code 1STQ009283A0000.
- Fixed reduced frame construction.
- 1800 mm specified height.
- 400 mm specified width.
- Designed for compatible modular low-voltage distribution board structures.
- Supports fixed structural arrangements within System pro E Power assemblies.
- Suitable for professional electrical panel building and switchboard manufacturing.
- Intended for integration with appropriately selected ABB mounting and enclosure components.
- Manufacturer-specific frame accessory for coordinated modular switchboard construction.
Technical Specifications
- Manufacturer: ABB
- Series: System pro E Power
- Model: PFRF1840
- ABB order code: 1STQ009283A0000
- Product designation: Fixed Reduced Frame H1800 W400
- Product type: Fixed reduced frame
- Product category: Electrical switchboard accessories / structural frames
- Frame configuration: Fixed
- Frame design: Reduced frame
- Specified height: 1800 mm
- Specified width: 400 mm
- Installation system: ABB System pro E Power
- Mounting application: Modular low-voltage switchboard assembly
- Suitable for: Compatible ABB System pro E Power distribution board structures
- Suitable product class: Low-voltage main distribution boards
- Application: Fixed reduced-frame structural arrangement
- Product classification: Switchboard structural frame accessory
Fixed Reduced-Frame Construction for Modular Low-Voltage Switchboards
Industrial and commercial low-voltage switchboards require carefully selected structural components to accommodate electrical distribution equipment, protective devices, busbar systems and internal mounting arrangements. The ABB PFRF1840 fixed reduced frame supports the construction of compatible System pro E Power assemblies requiring a dedicated fixed-frame configuration.
A reduced-frame arrangement forms part of the structural design of a modular switchboard. The PFRF1840 is specifically identified as a fixed reduced frame, distinguishing it from other frame configurations and accessories within the System pro E Power range. Selecting the correct frame is important for achieving the intended equipment layout and compatibility with associated enclosure components.
The specified 1800 mm height and 400 mm width identify the intended dimensional configuration. These dimensions should be matched to the relevant ABB System pro E Power assembly design, including any required mounting accessories, supporting structures and adjacent components.
The PFRF1840 is a structural frame accessory, not a complete distribution board, circuit breaker or electrical protective device. The final mechanical arrangement, electrical performance, enclosure protection and compliance with applicable IEC 61439 requirements depend on the complete switchboard design and correct installation in accordance with ABB technical documentation.
Typical Applications
- ABB System pro E Power modular main distribution boards.
- Industrial low-voltage electrical switchboard assemblies.
- Fixed reduced-frame configurations within compatible distribution boards.
- Commercial building electrical distribution cabinets.
- Manufacturing plant power distribution systems.
- Industrial electrical rooms and switchboard installations.
- Modular switchboard structural assembly and configuration.
- Infrastructure electrical distribution projects.
- OEM electrical panel building and switchboard manufacturing.
- Assembly, refurbishment and replacement of compatible ABB System pro E Power frame components.
Frequently Asked Questions
What is the ABB PFRF1840 used for?
The ABB PFRF1840 is a fixed reduced frame designed for compatible ABB System pro E Power modular low-voltage distribution boards. It supports the structural configuration of switchboard assemblies requiring the specified fixed reduced-frame arrangement.
What are the dimensions of the ABB PFRF1840?
The PFRF1840 is specified with a 1800 mm height and 400 mm width. These dimensions identify the intended fixed reduced-frame configuration within compatible ABB System pro E Power switchboard structures.
What does fixed reduced frame mean for the ABB PFRF1840?
The designation identifies the PFRF1840 as a fixed reduced-frame component within the ABB System pro E Power range. It is intended for the corresponding structural arrangement and should be selected according to the applicable ABB switchboard assembly documentation.
Which ABB switchboard series is compatible with the PFRF1840?
The PFRF1840 belongs to the ABB System pro E Power product group and is intended for compatible modular low-voltage main distribution board assemblies. The exact mounting arrangement and associated components should be confirmed against ABB technical documentation.
What is the ABB order code for PFRF1840?
The official ABB order code is 1STQ009283A0000. The manufacturer product designation is PFRF1840, identifying a fixed reduced frame with a specified height of 1800 mm and width of 400 mm for the ABB System pro E Power range.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power modular switchboard components support flexible, organised and reliable low-voltage power distribution assemblies. The PFRF1840 fixed reduced frame provides a dedicated structural solution for compatible 1800 mm high and 400 mm wide switchboard configurations, helping electrical panel builders achieve consistent modular integration and professional distribution board construction.
