Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PSHW5081 System pro E power F2A-3A horizontal segregation accessory, order code 1STQ009282A0000, designed for compatible Emax 2 E1.2 and SACE Tmax T7 3-pole or 4-pole circuit breaker arrangements designated 500 x 800 mm.
£310.58
The ABB PSHW5081 is a dedicated F2A–3A segregation component designed for compatible ABB Emax 2 E1.2 and SACE Tmax T7 circuit breaker installations within the ABB System pro E power low-voltage switchboard range. Specified for a 500 mm × 800 mm horizontal arrangement, this accessory supports internal separation in modular main distribution switchboard assemblies.
The PSHW5081 is identified by the manufacturer designation SEGR.F2A-3A E1.2 T7 3/4P H. 500X800MM. It is intended for compatible 3-pole and 4-pole circuit breaker configurations and supports the implementation of the specified F2A–3A segregation arrangement within an appropriately designed System pro E power assembly.
With ABB order code 1STQ009282A0000, the PSHW5081 provides panel builders and switchboard manufacturers with an application-specific segregation accessory for integrating compatible circuit breaker installations. Its defined configuration helps support structured compartment layouts and the selection of appropriate mechanical separation components for professional low-voltage power distribution systems.
Internal segregation is an important aspect of low-voltage switchboard design, particularly where circuit breakers, busbars, terminals and other functional units must be arranged within designated compartments. Appropriate segregation components help establish physical separation between specified areas of the assembly, supporting the intended internal layout and the requirements of the completed switchboard design.
The ABB PSHW5081 is intended for the specified F2A–3A horizontal segregation configuration associated with compatible E1.2 and T7 3-pole or 4-pole circuit breaker arrangements. The 500 mm × 800 mm designation identifies the relevant installation configuration and should not automatically be interpreted as the exact manufactured dimensions of every supplied component. The segregation achieved in service, compatibility with individual breaker executions and compliance with applicable IEC 61439 requirements must be established from the complete ABB assembly documentation and verified switchboard design.
| Series | System pro E power |
|---|---|
| ABB order code | 1STQ009282A0000 |
| Product type | Circuit breaker segregation accessory |
| Product category | Main Distribution Board Segregation Components |
| Product group | System Pro E Power |
| Manufacturer description | SEGR.F2A-3A E1.2 T7 3/4P H. 500X800MM |
| Segregation designation | F2A–3A |
| Compatible circuit breaker series | ABB Emax 2 E1.2 / SACE Tmax T7 |
| Compatible pole configurations | 3P / 4P |
| Installation orientation | Horizontal |
| Specified arrangement size | 500 mm × 800 mm |
| Compatible switchboard system | ABB System pro E power |
| Primary function | Internal mechanical segregation for compatible circuit breaker arrangements |
| Application | Low-voltage main distribution switchboard construction |
The ABB PSHW5081 is a segregation accessory for compatible ABB System pro E power switchboards, designed for the specified F2A–3A arrangement associated with E1.2 and T7 circuit breaker installations.
The PSHW5081 is specified for compatible ABB Emax 2 E1.2 and ABB SACE Tmax T7 circuit breaker arrangements. Compatibility with a particular breaker execution should be checked against the relevant ABB assembly documentation.
Yes. The manufacturer's designation explicitly specifies 3-pole and 4-pole circuit breaker configurations.
The PSHW5081 is specified for a 500 mm × 800 mm horizontal arrangement. These are the designated configuration dimensions and do not necessarily represent the exact physical dimensions of each supplied component.
F2A–3A is the segregation configuration designation supplied in the ABB product description. The precise compartment arrangement and achieved form of separation must be determined from the applicable ABB System pro E power assembly instructions.
The manufacturer order code for the ABB PSHW5081 is 1STQ009282A0000.
The PSHW5081 is identified as a segregation accessory, not a complete circuit breaker assembly. Compatible E1.2 or T7 circuit breakers and other required installation components must be specified separately unless explicitly included in the supplier's package.
No. The PSHW5081 provides a mechanical segregation function and does not itself perform overload, short-circuit or earth-fault protection. These functions must be provided by appropriately selected electrical protective equipment.
The PSHW5081 can be considered for compatible ABB System pro E power switchboard designs intended to meet applicable IEC 61439 requirements. Final compliance and the achieved internal separation arrangement depend on the complete assembly design, installation and verification.
ABB System pro E power segregation accessories support professional electrical panel builders, switchboard manufacturers and engineers constructing modular low-voltage distribution systems. The ABB PSHW5081 provides a dedicated segregation solution for compatible Emax 2 E1.2 and SACE Tmax T7 circuit breaker arrangements, supporting structured internal compartment layouts in professionally designed main distribution switchboards.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.