1STQ009202A0000 ABB PMCS2255 Two Lateral Cable Connection Modules H225 D500 System pro E Power

Why Choose the ABB PMCS2255 System pro E Power Lateral Cable Connection Modules?

The ABB PMCS2255 (1STQ009202A0000) is a dedicated two-module lateral cable connection accessory for compatible ABB System pro E Power low-voltage electrical distribution switchboards. The manufacturer's designation specifies two lateral cable connection modules for an arrangement with a nominal height of 225 mm and a nominal depth of 500 mm.

The authoritative ABB designation, 2 LAT.CABLE CONNEC.MOD. H=225MM D=500MM, identifies the principal configuration requirements: two modules, lateral cable connection functionality, 225 mm nominal height and 500 mm nominal depth. These characteristics distinguish the PMCS2255 from cable connection accessories intended for different compartment sizes, installation positions or modular arrangements.

As part of the ABB System pro E Power product group, the PMCS2255 is intended for integration with compatible modular switchboard structures. It supports the organisation of designated cable connection areas within a coordinated low-voltage distribution assembly, where the positioning of conductors, connection equipment and neighbouring components must be considered during the design process.

The ABB PMCS2255 lateral cable connection module accessory provides electrical panel builders, switchboard manufacturers and installation contractors with a clearly identified component for the specified configuration. Its manufacturer order code, 1STQ009202A0000, supports accurate procurement, project specification, bill-of-materials preparation and compatible replacement identification.

Key Advantages

• Two-module configuration: Specifically designated as two lateral cable connection modules.
• Lateral cable connection arrangement: Intended for compatible side-related cable connection configurations within ABB System pro E Power switchboards.
• 225 mm nominal height: Specified for the corresponding cable connection module arrangement.
• 500 mm nominal depth: Designed for the associated switchboard depth configuration.
• ABB system integration: Belongs to the coordinated System pro E Power modular switchboard accessory range.
• Organised cable connection layout: Supports the provision of designated areas for electrical cable connection arrangements.
• Configuration-specific selection: Helps distinguish the required modules from accessories intended for different nominal dimensions.
• Professional panel-building applications: Relevant to industrial and commercial low-voltage electrical distribution projects.
• Accurate product identification: Clearly referenced as ABB PMCS2255, order code 1STQ009202A0000.
• Project documentation support: Suitable for inclusion in switchboard technical schedules and component lists.
• Compatible maintenance applications: Provides an exact manufacturer reference for replacement enquiries involving an existing suitable assembly.

Key Features

• ABB System pro E Power modular switchboard accessory.
• PMCS2255 manufacturer model designation.
• ABB order code: 1STQ009202A0000.
• Manufacturer designation: 2 LAT.CABLE CONNEC.MOD. H=225MM D=500MM.
• Two lateral cable connection modules identified in the manufacturer specification.
• Lateral cable connection configuration.
• 225 mm nominal module arrangement height.
• 500 mm nominal configuration depth.
• Intended for compatible low-voltage electrical distribution switchboards.
• Supports coordinated cable connection compartment layouts.
• Designed for integration with appropriate ABB System pro E Power enclosure structures.
• Relevant to modular main distribution board construction.
• Requires verification of the selected enclosure and cable connection arrangement.
• Suitable for new switchboard assembly and compatible accessory replacement.
• Intended for professional installation following ABB technical documentation.

Lateral Cable Connection Modules for Low-Voltage Switchboards

The ABB PMCS2255 is identified as a two-module lateral cable connection accessory. In low-voltage distribution switchboards, cable connection arrangements are an important part of the overall assembly design because they influence how incoming or outgoing conductors are positioned, terminated and accessed.

The term lateral identifies the side-related connection arrangement specified by ABB. This distinguishes the PMCS2255 from accessories intended for other cable connection positions or alternative internal layouts. The precise installation position and relationship to neighbouring equipment should be confirmed against the applicable System pro E Power technical drawings.

The manufacturer's designation explicitly identifies two cable connection modules. This is an important product selection characteristic, particularly when preparing a bill of materials for a modular switchboard with a defined cable connection configuration.

The PMCS2255 should not be treated as a complete electrical termination system solely on the basis of its description. The supplied designation does not establish whether terminals, cable clamps, electrical connectors, busbar connections or other installation hardware are included. The package contents and any additional components required for the application should be checked before ordering.

The appropriate cable connection arrangement must also account for conductor dimensions, bending space, connection accessibility and the positioning of adjacent switchboard equipment. These requirements depend on the complete electrical and mechanical design rather than on the module designation alone.

225 mm Height and 500 mm Depth Configuration

The ABB PMCS2255 is specified for a 225 mm nominal height and a 500 mm nominal depth. These two measurements are essential for identifying the intended System pro E Power module configuration.

The 225 mm height identifies the nominal vertical dimension associated with the cable connection arrangement. This helps panel builders distinguish the PMCS2255 from modules intended for other vertical installation spaces.

The 500 mm depth identifies the nominal depth configuration for which the accessory is designated. Switchboard depth can influence the available internal space for cable routing, connection equipment, supporting structures and adjacent functional units.

These nominal configuration measurements should not automatically be interpreted as the exact physical dimensions of the manufactured components. The individual modules may have dimensions, fixing points or installation clearances that differ from the nominal assembly measurements. Exact details should be confirmed against the applicable ABB technical drawing.

When specifying the PMCS2255, both dimensions should be checked together. A compatible nominal height does not establish suitability for a different depth arrangement, and a matching nominal depth does not independently confirm compatibility with another module height.

Integration with ABB System pro E Power Modular Distribution Boards

The ABB System pro E Power range provides a modular platform for constructing low-voltage electrical switchboards. Depending on the application, a complete assembly may incorporate enclosure frames, busbar systems, protective devices, functional units, cable connection compartments and internal separation accessories.

The PMCS2255 lateral cable connection modules are intended for use within this coordinated system. Their role relates to the physical arrangement of cable connection areas rather than the switching or protection of electrical circuits.

For a successful installation, the panel builder should verify compatibility with the intended enclosure structure, the selected module position and any supporting or adjacent components required by ABB. The exact mounting arrangement should be determined from the relevant assembly instructions rather than inferred from the model number alone.

Cable connection areas may need to accommodate different conductor sizes, terminal arrangements and access requirements. The suitability of the overall installation therefore depends on the electrical design, the connected equipment and the available space within the finished switchboard.

Using the correct manufacturer-specific accessory helps maintain consistency between the switchboard design and the components ordered for assembly. The ABB order code 1STQ009202A0000 should be recorded accurately in technical schedules, procurement documents and maintenance records.

Cable Connection Layout, Accessibility and Assembly Planning

Cable connection planning is an important aspect of professional switchboard construction. The arrangement must provide suitable space for conductors to enter, route and connect to the designated electrical equipment while meeting the installation requirements of the complete assembly.

The ABB PMCS2255 supports a specified lateral cable connection configuration, but it does not independently determine the number of cables that can be accommodated. Cable capacity depends on factors such as conductor cross-sectional area, insulation type, connection equipment, bending requirements and the layout of neighbouring components.

The installer should also consider the accessibility of electrical connections for inspection and maintenance. Where a switchboard contains multiple functional units or cable compartments, the overall arrangement should provide the access required by the applicable design and operating procedures.

If internal segregation is required, the cable connection arrangement must be coordinated with the appropriate separation barriers and compartment structures. The PMCS2255 designation does not establish a particular segregation form or confirm that additional barriers are included.

The finished assembly should be reviewed for mechanical suitability, conductor routing, connection accessibility and the applicable electrical requirements before it is placed into service.

IEC/EN 61439 and Complete Switchboard Verification

The IEC/EN 61439 series provides requirements for low-voltage switchgear and controlgear assemblies. Compliance is established through the design and verification of the complete assembly, including its enclosure, installed equipment, electrical connections and supporting structures.

The ABB PMCS2255 is a switchboard accessory and should not be assigned independent electrical ratings that are not stated in the manufacturer specification. In particular, the supplied designation does not establish a rated current, rated voltage, short-circuit withstand capability or ingress protection classification for the modules.

The electrical performance of the completed switchboard depends on the selected conductors, terminals, protective devices, busbar systems and other relevant components. Any connection arrangement must be suitable for the intended electrical loading and operating conditions.

Similarly, internal separation classifications such as Form 2, Form 3 or Form 4 depend on the complete arrangement of busbars, functional units, terminals and segregation barriers. The PMCS2255 does not independently establish any particular segregation form.

The switchboard manufacturer remains responsible for verifying the completed assembly against the applicable requirements and the relevant ABB System pro E Power technical instructions.

Selecting and Installing the ABB PMCS2255

Before ordering the ABB PMCS2255, confirm that the intended electrical switchboard belongs to the System pro E Power range and requires the specified two-module lateral cable connection arrangement.

Check the nominal configuration dimensions carefully. The PMCS2255 is designated for H=225MM and D=500MM, making the 225 mm nominal height and 500 mm nominal depth essential selection criteria.

Use the ABB manufacturer order code 1STQ009202A0000 for purchasing and technical documentation. This helps distinguish the PMCS2255 from other System pro E Power cable connection accessories with different dimensions or arrangements.

Before installation, consult the applicable ABB technical documentation to confirm the correct mounting position, supplied components, fixing requirements and any additional parts required. The manufacturer designation does not independently confirm the inclusion of electrical terminals, cable supports or connection hardware.

Installation should be undertaken by appropriately qualified personnel following ABB's assembly instructions. The completed switchboard must be verified as a whole to confirm that its cable connection layout, mechanical construction and electrical performance satisfy the project requirements.

Typical Applications

• ABB System pro E Power low-voltage electrical distribution switchboards.
• Two-module lateral cable connection arrangements.
• 225 mm nominal height cable connection configurations.
• 500 mm nominal depth switchboard arrangements.
• Industrial main distribution boards.
• Commercial building low-voltage electrical distribution assemblies.
• Modular switchboard manufacturing and assembly.
• Designated cable connection areas within compatible ABB enclosures.
• Industrial electrical power distribution installations.
• OEM electrical panel-building projects.
• Coordinated internal cable connection layouts.
• Switchboard construction requiring manufacturer-specific cable connection accessories.
• Extensions to compatible System pro E Power assemblies.
• Maintenance and refurbishment of existing ABB modular switchboards.
• Replacement of an identified ABB PMCS2255 accessory.