Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ009181A0000 ABB PTBB9090 System pro E Power IP65 Blind Top/Bottom Panel 900 mm x 900 mm
ABB PTBB9090 (1STQ009181A0000) is an IP65 blind top/bottom enclosure panel for ABB System pro E Power low-voltage distribution switchboards, designed for compatible 900 mm wide and 900 mm deep structures requiring a solid enclosure closure without preformed cable openings.
£199.65
Why Choose the ABB PTBB9090 System pro E Power IP65 Blind Top/Bottom Panel?
The ABB PTBB9090 (1STQ009181A0000) is a purpose-designed IP65 blind top and bottom enclosure panel for compatible ABB System pro E Power low-voltage electrical distribution switchboards. Designed for enclosure structures with a nominal width of 900 mm and depth of 900 mm, this accessory provides a solid, unperforated closure for the upper or lower section of a modular switchboard cabinet.
As part of the ABB System pro E Power range, the PTBB9090 supports the construction of enclosed electrical distribution assemblies requiring enhanced protection against dust and water ingress. Its blind panel configuration provides a continuous enclosure surface without preformed cable entry openings, making it suitable for switchboard installations where a sealed top or bottom closure is required.
Designed for IP65 enclosure configurations, the PTBB9090 helps maintain the protective enclosure boundary when correctly installed with compatible ABB structural components, seals and fixing accessories. Its 900 mm × 900 mm nominal enclosure compatibility makes it suitable for industrial and commercial main distribution boards where reliable enclosure protection, modular construction and professional finishing are important.
Key Advantages
- Purpose-designed IP65 blind top/bottom panel for ABB System pro E Power switchboards.
- Compatible with 900 mm wide × 900 mm deep enclosure structures.
- Solid, unperforated construction provides a closed enclosure surface without preformed cable openings.
- Supports IP65 dust and water ingress protection when installed as part of a correctly configured enclosure assembly.
- Suitable for top or bottom enclosure closure applications.
- Helps protect internal electrical distribution equipment from environmental contaminants.
- Dedicated ABB accessory design supports compatibility with the System pro E Power modular enclosure platform.
- Provides a professional enclosure finish for industrial electrical switchboards.
- Suitable for main distribution board assemblies requiring enhanced enclosure protection.
- Supports flexible switchboard construction using coordinated ABB enclosure accessories.
Key Features
- ABB System pro E Power modular switchboard accessory.
- PTBB9090 manufacturer model designation.
- 1STQ009181A0000 ABB ordering reference.
- IP65-rated enclosure accessory for compatible switchboard configurations.
- Blind top/bottom panel design without preformed cable entry openings.
- 900 mm nominal enclosure width.
- 900 mm nominal enclosure depth.
- Designed for installation at the top or bottom of compatible switchboard structures.
- Supports protection against dust ingress and water jets when correctly incorporated into an IP65 assembly.
- Solid enclosure closure suitable for electrical distribution cabinet applications.
- Compatible with the ABB System pro E Power low-voltage switchboard platform.
- Designed for professional electrical panel building and modular enclosure assembly.
Reliable IP65 Enclosure Protection for Electrical Distribution Switchboards
Protecting electrical distribution equipment from dust, moisture and environmental contaminants is an important consideration in industrial and commercial switchboard design. The ABB PTBB9090 blind top/bottom panel provides a solid enclosure closure for compatible System pro E Power structures, helping maintain the protective boundary around internal electrical components. Its unperforated design is particularly useful where no cable entry opening is required through the selected top or bottom enclosure surface.
The IP65 classification indicates dust-tight protection and resistance to water jets when the complete enclosure is correctly designed, assembled and sealed. The ABB System pro E Power platform uses coordinated enclosure components to support modular low-voltage power distribution installations. The PTBB9090 is intended for use with compatible 900 mm wide and 900 mm deep enclosure structures, with the final ingress protection rating dependent on the correct installation of all panels, seals, doors, joints and associated accessories.
Typical Applications
- ABB System pro E Power main distribution switchboards.
- IP65 low-voltage electrical distribution enclosures.
- Industrial electrical switchboard installations.
- Commercial building power distribution assemblies.
- Top enclosure closure where no cable entry opening is required.
- Bottom enclosure closure for compatible modular switchboard structures.
- Electrical distribution equipment in dusty industrial environments.
- Manufacturing and processing facility electrical panels.
- Warehouse and industrial premises power distribution systems.
- Professional electrical panel building and switchboard manufacturing.
Technical Specifications
| Series | System pro E Power |
|---|---|
| ABB order code | 1STQ009181A0000 |
| Product type | Blind top/bottom enclosure panel |
| Product category | Main distribution board enclosure accessory |
| Protection rating | IP65, in a correctly assembled compatible enclosure |
| Panel configuration | Blind / solid |
| Nominal enclosure width | 900 mm |
| Nominal enclosure depth | 900 mm |
| Mounting position | Top or bottom of enclosure |
| Preformed cable entry openings | None |
| Accessory function | Enclosure closure and environmental protection |
| Compatible enclosure system | ABB System pro E Power |
| Application | Low-voltage main distribution switchboards |
| Installation type | Enclosure-mounted accessory |
| Enclosure protection application | Dust-tight and water-jet-resistant switchboard configurations |
Frequently Asked Questions
What is the ABB PTBB9090 1STQ009181A0000 used for?
The ABB PTBB9090 is a blind top/bottom enclosure panel designed to close the upper or lower section of compatible ABB System pro E Power low-voltage distribution switchboards. It is intended for IP65 enclosure configurations requiring a solid panel without preformed cable entry openings.
What enclosure dimensions is the ABB PTBB9090 designed for?
The PTBB9090 is designed for ABB System pro E Power switchboard structures with a nominal width of 900 mm and depth of 900 mm. These values describe the compatible enclosure configuration rather than the exact manufactured dimensions of the panel.
What does the IP65 rating mean for the ABB PTBB9090?
IP65 indicates protection against dust ingress and water jets when the panel is correctly installed as part of a compatible, fully assembled and sealed enclosure. The complete switchboard must use the appropriate components and installation methods to achieve the specified ingress protection rating.
Does the ABB PTBB9090 have cable entry openings?
No. The PTBB9090 is a blind enclosure panel, meaning it is designed without preformed cable entry openings. It is suitable for top or bottom enclosure positions where a solid closure is required.
Can the ABB PTBB9090 be installed at either the top or bottom of a switchboard?
Yes. The PTBB9090 is designated as a top/bottom enclosure accessory for compatible ABB System pro E Power switchboards. Installation must follow the applicable ABB assembly requirements to maintain the intended enclosure protection.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power enclosure accessories support the construction of professional low-voltage electrical distribution assemblies with coordinated mechanical protection and modular flexibility. The PTBB9090 (1STQ009181A0000) provides a dedicated IP65 blind top/bottom closure solution for compatible 900 mm × 900 mm switchboard structures, helping electrical panel builders create securely enclosed, professionally finished power distribution equipment for industrial and commercial applications.
