1STQ009180A0000 ABB PTBB7070 System pro E power IP65 Blind Top/Bottom Panel 700 x 700 mm

1STQ009180A0000 ABB PTBB7070 System pro E power IP65 Blind Top/Bottom Panel 700 x 700 mm

ABB PTBB7070 System pro E power IP65 blind top/bottom enclosure panel designed for compatible 700 mm wide and 700 mm deep modular low-voltage switchboard assemblies requiring dust-tight and water-jet-resistant enclosure protection.

SKU: 1STQ009180A0000Alt SKU: PTBB7070MPN: 1STQ009180A0000
Price
List Price £149.27 ex VAT
Your Price (ex VAT)
£149.27
Manufacturer Lead Time Estimated Delivery 3 weeks
Get the best trade prices Trade exclusive

Create an online account to unlock exclusive pricing, special offers and more.

Create an online account Quick & easy setup
SUBTOTAL (EX VAT) £149.27
Trade pricing is personalised to your account

Manufacturer Lead Time

£149.27

Why Choose the ABB PTBB7070 System pro E power IP65 Blind Top/Bottom Panel?

The ABB PTBB7070 is a purpose-designed IP65 blind top/bottom enclosure panel for the ABB System pro E power modular low-voltage switchboard range. This enclosure accessory is designed to close designated top or bottom openings in compatible electrical distribution assemblies, helping protect internal electrical equipment against dust and water ingress when correctly installed as part of a suitable enclosure system.

As part of the ABB System pro E power series, the PTBB7070 is specified for switchboard configurations with a nominal 700 mm width and 700 mm depth. Its blind-panel construction provides a closed enclosure surface where cable-entry apertures or ventilation openings are not required, supporting the construction of protected low-voltage electrical distribution equipment.

The ABB PTBB7070, order code 1STQ009180A0000, carries the manufacturer designation IP65 BLIND TOP/BOTTOM W=700MM D=700MM. Its system-specific design makes it suitable for compatible industrial and commercial switchboard installations requiring enclosure components with an IP65 protection designation.

Key Advantages

  • Purpose-designed IP65 blind top/bottom enclosure panel for ABB System pro E power switchboards.
  • IP65 protection designation for compatible dust-tight and water-jet-resistant enclosure configurations.
  • 700 mm nominal enclosure width for matching modular switchboard assemblies.
  • 700 mm nominal enclosure depth for compatible enclosure sections.
  • Blind-panel construction closes designated top or bottom enclosure openings.
  • Supports protection of internal electrical equipment against dust and water ingress.
  • Integrates with the modular ABB System pro E power switchboard platform.
  • Helps maintain a neat, enclosed and professionally assembled electrical distribution system.
  • Suitable for industrial and commercial installations requiring compatible IP65 enclosure components.

Key Features

  • ABB System pro E power modular switchboard accessory.
  • PTBB7070 manufacturer model designation.
  • IP65 blind top/bottom panel configuration.
  • 700 mm nominal enclosure width.
  • 700 mm nominal enclosure depth.
  • Designed for compatible top or bottom enclosure positions.
  • Solid blind closure for switchboard openings that do not require cable entry or ventilation.
  • Supports dust-tight enclosure construction when correctly installed.
  • Supports protection against water jets in appropriately configured IP65 assemblies.
  • Designed for integration into modular low-voltage power distribution switchboards.
  • ABB order code 1STQ009180A0000 for accurate identification and procurement.

Reliable IP65 Enclosure Protection for Electrical Distribution Systems

Top and bottom enclosure panels are important components in modular low-voltage switchboard construction. They provide physical closure for designated enclosure openings, helping separate internal electrical equipment from the surrounding environment and contributing to the overall protection arrangement of the completed assembly.

The ABB PTBB7070 provides a dedicated blind closure solution for compatible System pro E power switchboards with a nominal 700 mm width and 700 mm depth. Its solid-panel configuration is intended for locations where a closed enclosure surface is required instead of an open cable-entry or ventilation arrangement.

The IP65 designation, defined under IEC 60529, indicates dust-tight protection and resistance to water jets from any direction. This protection level is particularly relevant to electrical installations where airborne dust, moisture or equipment cleaning procedures may expose enclosures to challenging environmental conditions.

The PTBB7070 is an enclosure component rather than a complete IP65 enclosure. The final degree of protection depends on the complete switchboard configuration, compatible sealing arrangements, associated components and correct installation. Cable entries, doors, joints and other openings must also maintain the required protection level.

The wider ABB System pro E power platform supports modular low-voltage switchboard construction in accordance with the applicable requirements of IEC 61439-1 and IEC 61439-2. The PTBB7070 should be selected and installed in accordance with the relevant ABB assembly documentation to maintain the intended enclosure protection and mechanical compatibility.

Typical Applications

  • ABB System pro E power low-voltage switchboard assemblies.
  • Top and bottom enclosure closure applications.
  • Industrial electrical distribution boards requiring compatible IP65 protection.
  • Manufacturing facilities and production environments.
  • Commercial building electrical distribution systems.
  • Modular switchboards installed in dusty or moisture-exposed environments.
  • Electrical equipment enclosures requiring sealed blind-panel arrangements.
  • Switchboard manufacturing, assembly and refurbishment projects.

Technical Specifications

Series System pro E power
ABB order code 1STQ009180A0000
Product type Blind top/bottom enclosure panel
Product category Low-voltage switchboard enclosure accessories
Protection designation IP65
Solid particle protection Dust-tight, IP code first digit 6
Water ingress protection Protection against water jets, IP code second digit 5
Nominal enclosure width 700 mm
Nominal enclosure depth 700 mm
Panel configuration Blind / solid closure
Installation position Top or bottom
Mounting application Compatible modular switchboard enclosure assemblies
Compatible system ABB System pro E power
Application Low-voltage electrical distribution enclosure closure
Manufacturer product group System Pro E Power
Manufacturer designation IP65 BLIND TOP/BOTTOM W=700MM D=700MM

Frequently Asked Questions

What is the ABB PTBB7070 used for?

The ABB PTBB7070 is an IP65 blind top/bottom enclosure panel designed to close designated top or bottom openings in compatible ABB System pro E power low-voltage switchboards.

What enclosure dimensions is the ABB PTBB7070 designed for?

The PTBB7070 is specified for switchboard configurations with a nominal 700 mm width and 700 mm depth. These values identify the intended enclosure configuration rather than independently verified physical dimensions of the panel itself.

What does the IP65 protection designation mean?

IP65 indicates dust-tight protection and resistance to water jets from any direction. The completed switchboard must use compatible components and appropriate sealing arrangements to achieve its intended IP65 protection rating.

Can the ABB PTBB7070 be installed at both the top and bottom of a switchboard?

The manufacturer identifies the PTBB7070 as a top/bottom blind panel, intended for compatible top or bottom positions within ABB System pro E power switchboard assemblies. The exact installation arrangement should follow ABB's applicable assembly instructions.

What is the ABB order code for the PTBB7070?

The ABB manufacturer order code is 1STQ009180A0000, corresponding to the PTBB7070 IP65 blind top/bottom enclosure panel for System pro E power switchboards.

Trusted ABB Power Distribution Engineering

ABB System pro E power provides a modular platform for constructing low-voltage switchboards in industrial and commercial environments. The PTBB7070 supports protected enclosure construction through its dedicated IP65 blind top/bottom design for compatible 700 mm wide and 700 mm deep switchboard configurations.