Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ009178A0000 ABB PTBB1026 IP65 Blind Top/Bottom Panel 1000 x 200 mm – System pro E power
ABB PTBB1026 IP65 blind top/bottom panel, order code 1STQ009178A0000, designed for compatible System pro E power low-voltage electrical distribution enclosures with a nominal width of 1000 mm and depth of 200 mm.
£93.74
Why Choose the ABB PTBB1026 IP65 Blind Top/Bottom Panel?
The ABB PTBB1026 is an IP65 blind top/bottom panel designed for compatible ABB System pro E power low-voltage electrical distribution assemblies. With a nominal width of 1000 mm and depth of 200 mm, this component provides a dedicated enclosure covering solution for top or bottom positions within appropriately configured modular switchgear systems.
Designed for IP65 enclosure applications, the PTBB1026 features a blind configuration without pre-formed cable entry or equipment openings. This makes it suitable for compatible distribution board arrangements where a solid top or bottom covering panel is required. Its specified dimensions support coordinated integration with the modular enclosure structures and accessories of the ABB System pro E power range.
Identified by ABB manufacturer order code 1STQ009178A0000, the PTBB1026 supports professional electrical panel builders and switchgear manufacturers in constructing enclosed low-voltage distribution systems. Its dedicated top/bottom arrangement helps maintain organised enclosure construction while supporting the protection requirements of correctly assembled electrical installations.
Key Advantages
- Designed for IP65 System pro E power enclosure configurations.
- Suitable for top or bottom enclosure covering applications.
- Nominal 1000 mm width for compatible distribution board structures.
- Nominal 200 mm depth for the specified enclosure arrangement.
- Blind panel design without pre-formed cable entry openings.
- Supports enclosure protection when installed as part of a correctly configured IP65 assembly.
- Provides a dedicated covering solution for unused top or bottom enclosure openings.
- Part of the coordinated ABB System pro E power modular switchgear range.
- Suitable for professional commercial and industrial electrical distribution installations.
Key Features
- ABB System pro E power modular enclosure accessory.
- PTBB1026 manufacturer model designation.
- 1STQ009178A0000 ABB manufacturer order code.
- IP65 enclosure application designation.
- Blind top/bottom panel configuration.
- 1000 mm nominal width.
- 200 mm nominal depth.
- Solid covering arrangement without designated cable entry cut-outs.
- Designed for compatible low-voltage distribution board enclosures.
- Supports coordinated installation with appropriately selected System pro E power components.
- Suitable for professional electrical switchgear and panel-building applications.
IP65 Top and Bottom Enclosure Protection for Low-Voltage Switchgear
Top and bottom covering panels form an important part of modular electrical enclosure construction. These components close designated enclosure openings and help establish the protective boundary around installed electrical equipment. Blind panels are particularly useful where cable entry openings are not required, allowing panel builders to maintain a continuous enclosure covering surface in the selected location.
The ABB PTBB1026 is specified for IP65 top/bottom applications within compatible System pro E power configurations measuring a nominal 1000 mm wide and 200 mm deep. IP65 denotes protection against dust ingress and water jets under the relevant test conditions. However, the finished switchgear assembly achieves its required degree of protection only when all enclosure components, seals, fasteners and any cable entries are correctly selected and installed in accordance with ABB documentation.
Typical Applications
- ABB System pro E power low-voltage distribution enclosures.
- IP65 top covering arrangements in compatible switchgear assemblies.
- IP65 bottom covering arrangements in compatible distribution boards.
- Enclosure configurations with a nominal width of 1000 mm and depth of 200 mm.
- Commercial building electrical distribution installations.
- Industrial switchboards and electrical distribution panels.
- Electrical panel-building and switchgear manufacturing.
- Factory and manufacturing facility electrical infrastructure.
- Modular electrical enclosure assembly and refurbishment.
Technical Specifications
| Series | System pro E power |
|---|---|
| Manufacturer order code | 1STQ009178A0000 |
| Product group | System Pro E Power |
| Product type | Blind top/bottom panel |
| Accessory category | Electrical distribution enclosure covering panel |
| Specified protection designation | IP65 |
| Nominal width | 1000 mm |
| Nominal depth | 200 mm |
| Installation position | Top or bottom |
| Panel configuration | Blind |
| System compatibility | ABB System pro E power |
| Application | Low-voltage electrical distribution board enclosures |
| Installation requirements | In accordance with ABB System pro E power assembly documentation |
Frequently Asked Questions
What is the ABB PTBB1026 used for?
The ABB PTBB1026 is a blind top/bottom covering panel designed for compatible ABB System pro E power low-voltage electrical distribution enclosures with an IP65 protection requirement.
What are the dimensions of the ABB PTBB1026?
The PTBB1026 is specified for a nominal 1000 mm width and 200 mm depth. These dimensions identify its intended System pro E power enclosure configuration.
What does IP65 mean for the ABB PTBB1026?
The PTBB1026 is designated for IP65 enclosure applications. IP65 indicates dust-tight protection and resistance to water jets under specified test conditions. The complete enclosure must be correctly assembled and verified to achieve the required protection rating.
Can the ABB PTBB1026 be installed at either the top or bottom of an enclosure?
The PTBB1026 is designated as a blind top/bottom panel for compatible ABB System pro E power assemblies. The permitted mounting position and required accessories should be confirmed using the relevant ABB installation documentation.
What is the ABB manufacturer order code for the PTBB1026?
The official ABB manufacturer order code is 1STQ009178A0000, identifying the PTBB1026 IP65 blind top/bottom panel within the System pro E power product range.
Trusted by Electrical Panel Builders and Switchgear Manufacturers
ABB System pro E power enclosure components support electrical engineers, switchgear manufacturers and professional panel builders in constructing modular low-voltage electrical distribution assemblies. The PTBB1026 provides a dedicated IP65 blind top/bottom covering solution for compatible 1000 mm wide and 200 mm deep enclosure configurations, supporting coordinated enclosure construction and professional switchgear installations.
