Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PPBS0250 (1STQ009171A0000) is a 250 mm high lateral blind cell segregation accessory designed to provide physical separation between designated internal compartments of System pro E Power low-voltage main distribution switchboards.
£25.97
The ABB PPBS0250 is a purpose-designed lateral blind cell segregation accessory developed for use within ABB System pro E Power low-voltage main distribution switchboards. Identified by ABB order code 1STQ009171A0000, this internal segregation component has a nominal height of 250 mm and provides a physical barrier between designated areas of compatible modular electrical distribution assemblies.
As part of the ABB System pro E Power modular switchboard range, the PPBS0250 supports organised internal compartment layouts by providing a solid lateral separation element. Its blind barrier configuration helps establish defined boundaries between adjacent equipment areas, supporting the mechanical segregation arrangements required in professionally designed low-voltage switchboards.
Designed for electrical panel builders, switchboard manufacturers and industrial electrical contractors, the PPBS0250 provides a practical solution for incorporating 250 mm high lateral cell segregation into compatible System pro E Power configurations. Its modular design supports integration with appropriately selected switchboard structural components and additional segregation accessories, helping engineers create organised electrical distribution assemblies with clearly defined internal compartments.
The ABB PPBS0250 lateral blind cell segregation accessory provides a dedicated mechanical barrier for use within compatible System pro E Power main distribution switchboards. Internal segregation components are used to establish physical boundaries between equipment compartments, helping engineers organise electrical devices and define functional areas within the switchboard structure.
ABB System pro E Power is a modular switchboard platform developed for low-voltage electrical power distribution. The system includes structural components, equipment mounting arrangements, internal barriers and segregation accessories that allow panel builders to configure switchboards according to installation requirements. The PPBS0250 is specifically intended for 250 mm high lateral blind cell separation, making it suitable for corresponding compartment arrangements within the modular system.
When combined with appropriately selected surrounding barriers, mounting components and switchboard structures, the PPBS0250 can contribute to an engineered internal separation arrangement. Its blind configuration provides a solid partition rather than an intentionally open separation element. The achieved form of segregation, electrical clearances, degree of protection and compliance with applicable IEC/EN 61439 requirements depend on the design and verification of the complete switchboard assembly. The PPBS0250 is a mechanical segregation accessory and does not independently establish an electrical protection rating.
| Product series | System pro E Power |
|---|---|
| Manufacturer part number | 1STQ009171A0000 |
| Product type | Lateral blind cell segregation |
| Accessory category | Internal switchboard segregation component |
| Segregation configuration | Blind / solid |
| Installation orientation | Lateral |
| Nominal height | 250 mm |
| Installation location | Internal switchboard compartment |
| Primary function | Physical separation of designated switchboard cell areas |
| Compatible switchboard system | ABB System pro E Power |
| Switchboard category | Main distribution boards |
| Application | Low-voltage electrical distribution assemblies |
| Applicable assembly standard | IEC/EN 61439 series, subject to verification of the complete switchboard assembly |
The ABB PPBS0250 is a lateral blind cell segregation accessory used to provide physical separation between designated internal areas of compatible ABB System pro E Power low-voltage main distribution switchboards.
The PPBS0250 has a nominal height of 250 mm and is designed for corresponding lateral segregation arrangements within the ABB System pro E Power modular switchboard system.
Blind cell segregation refers to a solid barrier arrangement used to physically separate designated areas within an electrical switchboard. Unlike an open or ventilated partition, a blind barrier provides a continuous separation surface across its installed area.
The PPBS0250 is designed for the ABB System pro E Power modular low-voltage switchboard system. Compatibility with a particular compartment arrangement should be checked against the applicable ABB switchboard configuration and installation requirements.
The PPBS0250 is an individual lateral segregation component. The achieved form of internal separation depends on the complete switchboard design, including the arrangement of all relevant barriers, compartments and electrical equipment. A specific segregation form cannot be established from this accessory alone.
ABB System pro E Power segregation accessories provide electrical panel builders, switchboard manufacturers and distribution engineers with modular components for creating organised low-voltage power distribution assemblies, supporting defined equipment compartments, structured internal layouts and dependable mechanical integration.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.