1STQ009169A0000 ABB PPBS0100 Lateral Blind Cell Segregation H100 System pro E Power

Why Choose the ABB PPBS0100 System pro E Power Lateral Blind Cell Segregation Accessory?

The ABB PPBS0100 (1STQ009169A0000) is a dedicated lateral blind cell segregation accessory for compatible ABB System pro E Power low-voltage electrical distribution switchboards. Specified for a nominal segregation height of 100 mm, this component supports the creation of defined internal separation boundaries within the designated blind cell arrangement of a modular switchboard assembly.

The authoritative ABB manufacturer designation, LATERAL BLIND CELL SEGREGATION H=100MM, identifies the product's essential characteristics: a lateral segregation arrangement, a blind cell application and a nominal height of 100 mm. These specifications distinguish the PPBS0100 from accessories intended for different compartment positions or segregation heights.

As part of the ABB System pro E Power product group, the PPBS0100 is intended for use with compatible switchboard structures and associated internal components. It provides a manufacturer-specific solution for electrical panel builders requiring a lateral separation element within a coordinated low-voltage distribution assembly.

For switchboard manufacturers, electrical contractors and maintenance engineers, the ABB PPBS0100 lateral blind cell segregation component offers a clearly identified accessory for the specified 100 mm nominal configuration. Its ABB manufacturer order code, 1STQ009169A0000, supports accurate purchasing, technical specification, project documentation and replacement identification.

Key Advantages

• Dedicated lateral segregation accessory: Intended for compatible ABB System pro E Power low-voltage switchboards.
• Blind cell application: Specifically identified for lateral blind cell segregation arrangements.
• 100 mm nominal height: Specified for the corresponding internal compartment configuration.
• Modular system integration: Supports coordinated switchboard construction using ABB System pro E Power components.
• Defined physical separation: Helps establish a boundary within the designated switchboard cell arrangement.
• Configuration-specific selection: Distinguishes the required accessory from segregation components with different nominal heights.
• Professional panel-building applications: Relevant to industrial, commercial and infrastructure distribution assemblies.
• Accurate product identification: Referenced by model PPBS0100 and ABB order code 1STQ009169A0000.
• Suitable for technical documentation: Can be recorded in bills of materials, assembly schedules and maintenance records.
• Compatible replacement identification: Provides an exact manufacturer reference for refurbishment and maintenance projects.
• System-based installation: Intended for use with appropriate ABB structural and segregation components.

Key Features

• ABB System pro E Power modular switchboard accessory.
• PPBS0100 manufacturer model designation.
• ABB manufacturer order code: 1STQ009169A0000.
• Manufacturer designation: LATERAL BLIND CELL SEGREGATION H=100MM.
• Lateral segregation arrangement.
• Blind cell configuration.
• 100 mm nominal segregation height.
• Intended for compatible low-voltage electrical distribution assemblies.
• Supports physical separation within designated switchboard compartments.
• Designed for integration with appropriate ABB System pro E Power components.
• Suitable for coordinated internal segregation schemes.
• Relevant to new switchboard construction and compatible accessory replacement.
• Requires verification of the intended enclosure and cell configuration.
• Intended for professional installation following ABB assembly instructions.

Understanding Lateral Blind Cell Segregation in Electrical Switchboards

The ABB PPBS0100 is specifically identified as a lateral blind cell segregation accessory. In modular electrical switchboards, internal segregation components establish physical boundaries between designated areas of the assembly. These boundaries form part of the compartment layout specified by the switchboard designer.

The term lateral identifies the side-related segregation arrangement for which the accessory is intended. This distinguishes the PPBS0100 from components designed for rear vertical, front vertical or horizontal separation positions. Its precise mounting location and relationship to adjacent structural elements should be established from the relevant ABB System pro E Power assembly drawings.

The blind cell designation identifies a particular internal cell configuration. The PPBS0100 should therefore be selected for the corresponding ABB arrangement rather than treated as a general-purpose enclosure blanking plate or a universal compartment divider.

The manufacturer's specification includes a 100 mm nominal height. This is an important configuration parameter when selecting the correct segregation accessory. However, it should not automatically be interpreted as the exact physical height of the manufactured component. Precise measurements, mounting points and installation clearances should be confirmed against the applicable ABB technical documentation.

Using a manufacturer-designated component helps maintain consistency between the intended switchboard layout and the installed accessories. Depending on the complete assembly, the PPBS0100 may need to be combined with additional segregation barriers, supports or structural elements specified by ABB.

Designed for ABB System pro E Power Modular Distribution Boards

The ABB System pro E Power platform provides a modular approach to constructing low-voltage electrical distribution switchboards. A complete assembly may incorporate enclosure frames, busbar systems, circuit-breakers, functional units, connection compartments and dedicated internal segregation accessories.

The PPBS0100 lateral blind cell segregation component forms part of this coordinated system. Its role is mechanical rather than electrical: it is intended to contribute to physical separation within the designated cell arrangement and is not itself a circuit protection device or electrical connection component.

When selecting the PPBS0100, panel builders should confirm that the switchboard design requires a lateral blind cell accessory with a nominal height of 100 mm. Compatibility must also be checked against the enclosure structure, cell arrangement, adjacent equipment and any additional segregation components.

The exact ABB manufacturer reference, 1STQ009169A0000, should be included in the project's bill of materials. Similar accessories may differ in nominal height or intended installation position, making accurate model identification important for both procurement and assembly.

The PPBS0100 should be installed in accordance with the applicable ABB System pro E Power instructions. Any additional components needed to complete the intended segregation scheme must be selected as part of the overall switchboard design.

Internal Segregation and IEC/EN 61439 Considerations

Internal separation is an important consideration in many low-voltage switchboard designs. Depending on the required configuration, physical barriers may be used to separate busbars, functional units, terminals and other designated areas of the assembly.

The IEC/EN 61439 series establishes requirements for low-voltage switchgear and controlgear assemblies. Internal separation arrangements are commonly described using forms that indicate the degree of separation between different functional areas.

For example, Form 2 arrangements provide separation between busbars and functional units, while Form 3 arrangements additionally separate individual functional units. Form 4 arrangements incorporate further separation involving terminals associated with functional units. The applicable classification depends on the construction of the complete switchboard.

The ABB PPBS0100 can contribute to a physical segregation arrangement, but its manufacturer designation does not independently establish Form 2, Form 3, Form 4 or any particular subdivision. The final classification depends on the complete design and correct installation of all required separation components.

The PPBS0100 is a mechanical segregation accessory, not a protective switching device, busbar system or complete electrical enclosure. It does not independently determine the switchboard's rated current, short-circuit withstand performance, ingress protection or compliance with IEC/EN 61439.

These characteristics must be verified for the completed electrical assembly, taking account of its enclosure, installed equipment, electrical connections and applicable manufacturer instructions.

Selecting and Installing the ABB PPBS0100

Before ordering the ABB PPBS0100, confirm that the intended switchboard belongs to the System pro E Power range and requires the specified lateral blind cell segregation arrangement.

The nominal height is a key selection requirement. The PPBS0100 is designated for H=100MM, making the 100 mm nominal configuration an essential characteristic when comparing it with other ABB segregation accessories.

The manufacturer order code 1STQ009169A0000 should be used for purchasing, technical enquiries and maintenance documentation. This helps distinguish the PPBS0100 from the related PPBS0050, which is specified for a 50 mm nominal height.

Before installation, consult ABB's relevant technical documentation to confirm the correct cell position, physical dimensions, fixing requirements and any complementary components. The supplied product designation does not independently establish the accessory's material, weight or complete package contents.

Installation should be undertaken by appropriately qualified personnel following ABB's applicable assembly instructions. The finished switchboard must be assessed as a complete assembly to confirm that its mechanical arrangement, internal separation and electrical performance satisfy the project requirements.

Typical Applications

• ABB System pro E Power low-voltage electrical distribution switchboards.
• Lateral blind cell segregation within compatible modular enclosures.
• 100 mm nominal height internal separation arrangements.
• Physical separation of designated switchboard cell areas.
• Industrial main distribution boards.
• Commercial building electrical distribution assemblies.
• Modular low-voltage switchboard construction.
• Electrical infrastructure installations using ABB System pro E Power.
• OEM electrical panel manufacturing.
• Switchboard compartment layout and segregation projects.
• Coordinated internal separation arrangements using ABB accessories.
• Switchboard extensions where the required configuration has been verified.
• Maintenance and refurbishment of compatible System pro E Power assemblies.
• Replacement of an existing ABB PPBS0100 segregation component.