1STQ009168A0000 ABB PPBS0050 Lateral Blind Cell Segregation H50 System pro E Power

Why Choose the ABB PPBS0050 System pro E Power Lateral Blind Cell Segregation Accessory?

The ABB PPBS0050 (1STQ009168A0000) is a dedicated lateral blind cell segregation accessory for compatible ABB System pro E Power low-voltage electrical distribution switchboards. Specified with a nominal height of 50 mm, this component is intended for applications requiring a defined lateral separation arrangement within the modular switchboard structure.

The authoritative ABB manufacturer designation, LATERAL BLIND CELL SEGREGATION H=50MM, identifies the product's principal characteristics: a lateral segregation arrangement, a blind cell application and a nominal height of 50 mm. These details distinguish the PPBS0050 from segregation components intended for different positions, heights or internal compartment configurations.

As part of the ABB System pro E Power product group, the PPBS0050 supports the construction of organised internal switchboard layouts using manufacturer-specific accessories. It can form part of a coordinated physical separation arrangement when installed with the appropriate enclosure structure and complementary segregation components.

For electrical panel builders, switchboard manufacturers and maintenance engineers, the ABB PPBS0050 lateral blind cell segregation component provides a clearly identifiable solution for the specified 50 mm nominal configuration. Its manufacturer order code, 1STQ009168A0000, supports accurate procurement, technical documentation and replacement-part identification.

Key Advantages

• Dedicated lateral segregation accessory: Intended for compatible ABB System pro E Power switchboard assemblies.
• Blind cell configuration: Specifically identified for lateral blind cell segregation applications.
• 50 mm nominal height: Designed for the corresponding internal segregation arrangement.
• Modular switchboard integration: Supports coordinated construction using ABB System pro E Power components.
• Defined compartment boundaries: Helps establish physical separation within the designated switchboard area.
• Configuration-specific selection: Reduces ambiguity when choosing between segregation accessories with different nominal heights or installation positions.
• Professional panel-building applications: Relevant to commercial, industrial and infrastructure distribution assemblies.
• Accurate manufacturer identification: Clearly referenced as ABB PPBS0050, order code 1STQ009168A0000.
• Suitable for project documentation: Can be specified in switchboard bills of materials and assembly schedules.
• Compatible replacement identification: Provides an exact reference for maintenance or refurbishment of an existing suitable assembly.
• System-based installation: Intended to be used alongside the appropriate ABB structural and segregation components.

Key Features

• ABB System pro E Power modular switchboard accessory.
• PPBS0050 manufacturer model designation.
• ABB order code: 1STQ009168A0000.
• Manufacturer designation: LATERAL BLIND CELL SEGREGATION H=50MM.
• Lateral segregation arrangement.
• Blind cell application.
• 50 mm nominal segregation height.
• Intended for compatible low-voltage electrical switchboard assemblies.
• Supports physical separation of designated internal enclosure areas.
• Designed for integration with appropriate ABB System pro E Power components.
• Relevant to coordinated compartment segregation schemes.
• Suitable for new switchboard construction and compatible accessory replacement.
• Requires verification of the enclosure configuration and installation position.
• Intended for professional installation in accordance with ABB assembly documentation.

Understanding Lateral Blind Cell Segregation in Electrical Switchboards

The ABB PPBS0050 is identified as a lateral blind cell segregation accessory. In a modular electrical switchboard, internal segregation components are used to establish physical boundaries between designated areas of the assembly. These boundaries help panel builders create the compartment layout required by the electrical and mechanical design.

The term lateral identifies the intended side-related segregation arrangement, distinguishing the PPBS0050 from accessories designated for rear vertical, front vertical or horizontal separation positions. The correct interpretation of its mounting position should be established from the applicable ABB System pro E Power assembly drawings.

The manufacturer's blind cell designation identifies the specific cell configuration for which the accessory is intended. It should not be assumed that the component is interchangeable with an open compartment barrier, a general-purpose blanking plate or a segregation accessory intended for another switchboard location.

The specified 50 mm nominal height is a key selection characteristic. This measurement describes the designated segregation configuration and should not automatically be treated as the exact overall physical height of the manufactured component. Where precise dimensions, fixing positions or installation clearances are required, the relevant ABB technical drawing should be consulted.

Using a manufacturer-designated component such as the PPBS0050 helps maintain consistency between the switchboard design and the installed accessories. The complete segregation arrangement may require additional panels, supports or structural elements depending on the selected System pro E Power configuration.

Designed for ABB System pro E Power Modular Switchboards

The ABB System pro E Power platform supports the construction of modular low-voltage electrical distribution assemblies. Depending on the application, these switchboards can incorporate enclosure structures, busbar systems, circuit-breakers, functional units, cable connection areas and internal separation accessories.

The PPBS0050 lateral blind cell segregation component forms part of this system-based approach. Its purpose is associated with a defined internal segregation position rather than the operation or protection of an electrical circuit.

When selecting the PPBS0050, panel builders should confirm that the relevant switchboard configuration requires a lateral blind cell accessory with a nominal height of 50 mm. The installation should also be checked for compatibility with neighbouring enclosure structures, mounting supports and other segregation components.

The exact manufacturer order code, 1STQ009168A0000, is important when preparing technical schedules and bills of materials. Similar segregation accessories may differ in height, location or intended cell configuration, so the model reference should not be substituted without confirming the alternative's suitability.

The PPBS0050 should be installed as part of the intended ABB switchboard arrangement. Any additional barriers or mechanical components required to complete the internal separation scheme must be identified from the relevant assembly documentation.

Internal Segregation and IEC/EN 61439 Considerations

Internal separation is an important design consideration in many low-voltage switchboards. Depending on the required arrangement, physical barriers may be used to separate busbars, functional units and terminal compartments.

The IEC/EN 61439 series provides requirements for low-voltage switchgear and controlgear assemblies. Internal separation arrangements are commonly described using forms that distinguish the degree of physical separation between different functional areas.

For example, Form 2 arrangements separate busbars from functional units, while Form 3 arrangements additionally separate individual functional units. Form 4 arrangements incorporate further separation involving terminals associated with functional units. The applicable classification depends on the detailed construction of the complete assembly.

The ABB PPBS0050 can contribute to a physical segregation arrangement, but its manufacturer designation does not independently establish Form 2, Form 3, Form 4 or any particular subdivision. The required classification must be determined from the complete switchboard design and the installation of all necessary separation components.

The PPBS0050 is a mechanical switchboard accessory, not a protective switching device, electrical busbar assembly or complete enclosure. It does not independently establish the switchboard's rated current, short-circuit withstand capability, ingress protection or conformity with IEC/EN 61439.

These characteristics must be verified for the finished electrical assembly, taking account of the selected equipment, electrical connections, enclosure construction and applicable manufacturer instructions.

Selecting and Installing the ABB PPBS0050

Before ordering the ABB PPBS0050, confirm that the intended electrical switchboard belongs to the System pro E Power range and requires the specified lateral blind cell segregation arrangement.

The required nominal height should be checked carefully. The PPBS0050 is designated for H=50MM, making the 50 mm nominal configuration a defining characteristic of the product.

Use the manufacturer order code 1STQ009168A0000 when purchasing the accessory or recording it in project documentation. This helps distinguish it from other ABB segregation components that may have different dimensions or mounting arrangements.

Before installation, consult the applicable ABB technical documentation to verify the intended cell position, component dimensions, mounting points, supplied contents and any complementary parts required. The supplied manufacturer designation does not independently establish the accessory's material, weight or complete fixing arrangement.

Installation should be performed by appropriately qualified personnel in accordance with ABB's assembly instructions. The finished switchboard must be assessed as a complete assembly to confirm that its mechanical arrangement, internal separation and electrical performance satisfy the project requirements.

Typical Applications

• ABB System pro E Power low-voltage electrical distribution switchboards.
• Lateral blind cell segregation within compatible modular enclosures.
• 50 mm nominal height internal separation arrangements.
• Physical separation of designated switchboard cell areas.
• Industrial main distribution boards.
• Commercial building electrical distribution assemblies.
• Modular low-voltage switchboard construction.
• Electrical infrastructure installations using ABB System pro E Power.
• OEM electrical panel manufacturing.
• Switchboard compartment layout and segregation projects.
• Coordinated internal separation arrangements using ABB accessories.
• Switchboard extensions where the required configuration has been verified.
• Maintenance and refurbishment of compatible System pro E Power assemblies.
• Replacement of an existing ABB PPBS0050 segregation component.