Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PSVS0055 System pro E power F3B vertical segregation component designed for compatible 500 x 700 mm switchboard arrangements incorporating ABB Emax E1.2 or Tmax T7 circuit breakers in 3-pole or 4-pole configurations.
£98.77
The ABB PSVS0055 is a specialised vertical segregation component designed for the ABB System pro E power modular low-voltage switchboard range. Developed for use with compatible ABB Emax E1.2 and Tmax T7 circuit breaker installations, this component supports internal separation within electrical distribution assemblies, helping switchboard builders create organised and structured equipment compartments.
As part of the ABB System pro E power series, the PSVS0055 is specified for 500 × 700 mm switchboard configurations and applications involving 3-pole or 4-pole circuit breakers. Its manufacturer designation identifies the component as a vertical segregation solution for F3B arrangements incorporating ABB E1.2 or T7 equipment.
The ABB PSVS0055, order code 1STQ009160A0000, carries the manufacturer designation SEGREG.VER.F3B E1.2 T7 3/4P H. 500X700MM. It provides a system-specific segregation accessory for compatible low-voltage switchboard assemblies used in industrial, commercial and infrastructure power distribution applications.
Internal segregation is an important aspect of low-voltage switchboard design. Segregation components provide physical separation between designated areas of an electrical assembly, helping establish organised compartments for switching equipment, protective devices and associated electrical connections.
The ABB PSVS0055 is designed for vertical segregation within compatible System pro E power switchboards incorporating ABB Emax E1.2 or Tmax T7 circuit breakers. Its 3-pole and 4-pole compatibility designation makes it applicable to selected circuit breaker arrangements used in industrial and commercial electrical distribution systems.
The F3B designation identifies the intended manufacturer segregation configuration. The final form of internal separation, accessibility and electrical performance of a completed switchboard depend on the full assembly design, installed components and verified configuration. The PSVS0055 should therefore be selected and installed in accordance with the relevant ABB System pro E power assembly instructions.
The wider ABB System pro E power platform supports modular low-voltage switchboard construction under the applicable requirements of IEC 61439-1 and IEC 61439-2. The PSVS0055 contributes to the physical compartment arrangement but does not independently determine the electrical ratings or compliance of the complete switchboard.
| Series | System pro E power |
|---|---|
| ABB order code | 1STQ009160A0000 |
| Product type | Vertical segregation component |
| Product category | Low-voltage switchboard accessories |
| Segregation orientation | Vertical |
| Configuration designation | F3B |
| Compatible circuit breaker families | ABB Emax E1.2 / ABB Tmax T7 |
| Compatible pole configurations | 3-pole / 4-pole |
| Specified assembly size | 500 × 700 mm |
| Manufacturer height designation | H. 500 × 700 mm |
| Installation application | Internal segregation for compatible circuit breaker compartments |
| Compatible system | ABB System pro E power |
| Manufacturer product group | System Pro E Power |
| Manufacturer designation | SEGREG.VER.F3B E1.2 T7 3/4P H. 500X700MM |
The ABB PSVS0055 is a vertical segregation component designed for compatible ABB System pro E power switchboards incorporating Emax E1.2 or Tmax T7 circuit breaker arrangements.
The manufacturer designation identifies compatibility with selected ABB Emax E1.2 and Tmax T7 circuit breaker arrangements in 3-pole and 4-pole configurations. The exact assembly compatibility should be verified against ABB installation documentation.
The PSVS0055 carries a 500 × 700 mm manufacturer assembly-size designation. These values identify the specified configuration rather than independently confirmed overall physical dimensions of the segregation component.
F3B is the manufacturer configuration designation associated with this vertical segregation component. Its application and the resulting form of internal separation must be determined from the complete ABB System pro E power switchboard configuration.
The ABB manufacturer order code is 1STQ009160A0000, corresponding to the PSVS0055 System pro E power vertical segregation component for compatible E1.2 and T7 circuit breaker arrangements.
ABB System pro E power provides a modular platform for constructing low-voltage switchboards in industrial and commercial environments. The PSVS0055 supports structured circuit breaker compartment separation through its dedicated vertical segregation design for compatible F3B arrangements incorporating ABB Emax E1.2 or Tmax T7 devices in 3-pole and 4-pole configurations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.