Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PVCX3607 (1STQ009148A0000) is a System pro E Power vertical installation kit for two compatible ABB SACE Tmax XT3 3-pole or 4-pole plug-in circuit-breakers in a 600 mm nominal width switchboard configuration.
£154.04
The ABB PVCX3607 (1STQ009148A0000) is a dedicated vertical installation kit for two ABB SACE Tmax XT3 circuit-breakers within compatible ABB System pro E Power low-voltage electrical distribution switchboards. Designed for 3-pole or 4-pole plug-in XT3 circuit-breaker configurations, this accessory is specified for a 600 mm nominal switchboard width.
The manufacturer's designation, 2 XT3 KIT 3-4P PLUG IN VERT.W=600MM, identifies the principal installation requirements: accommodation of two XT3 circuit-breakers, compatibility with 3-pole and 4-pole versions, a plug-in mounting configuration, vertical arrangement and a nominal switchboard width of 600 mm. These characteristics make the PVCX3607 a configuration-specific accessory for professional electrical panel builders working with ABB modular distribution assemblies.
As part of the ABB System pro E Power product group, the PVCX3607 supports the integration of compatible ABB SACE Tmax XT3 moulded-case circuit-breakers into a coordinated switchboard structure. Using a purpose-designated installation kit helps panel builders follow the intended equipment layout, identify the correct mounting arrangement and maintain consistency across the assembly.
The ABB PVCX3607 XT3 plug-in vertical kit is particularly relevant to main distribution boards and other low-voltage switchboard installations where two compatible XT3 circuit-breakers must be accommodated in a vertical configuration. Its dedicated manufacturer order code, 1STQ009148A0000, supports accurate specification, procurement and replacement identification.
The ABB PVCX3607 installation kit is specifically identified for a two-device arrangement using compatible ABB SACE Tmax XT3 moulded-case circuit-breakers. XT3 devices belong to ABB's Tmax XT circuit-breaker family, which is used in low-voltage electrical distribution applications requiring circuit protection and switching functionality.
The manufacturer's designation specifies two XT3 devices, making the PVCX3607 distinct from mounting accessories intended for a single circuit-breaker or a different number of devices. The correct arrangement of two circuit-breakers must be coordinated with the switchboard's mechanical structure, electrical connections and available installation space.
The kit is also designated for 3-pole and 4-pole XT3 configurations. Three-pole circuit-breakers are commonly used in three-phase electrical systems, while four-pole versions provide an additional switched pole for applications requiring that configuration. The correct pole arrangement depends on the electrical design and the specific circuit-breaker selected.
The plug-in execution is an important compatibility requirement. Plug-in circuit-breaker installations use a device arrangement designed for connection through the appropriate plug-in components, rather than the fixed or withdrawable execution of a different configuration. The PVCX3607 should therefore be selected only after confirming that the intended XT3 circuit-breakers and their associated plug-in equipment match the ABB installation requirements.
Although the kit is designed around the XT3 frame designation, this does not mean that every XT3 variant, accessory combination or terminal arrangement is automatically suitable. The complete circuit-breaker configuration must be checked against ABB's relevant compatibility and assembly documentation.
The vertical installation arrangement is a defining feature of the ABB PVCX3607. Within a modular switchboard, equipment orientation affects the positioning of circuit-breakers, the arrangement of supporting structures and the space available for electrical connections.
The manufacturer's specification identifies a 600 mm nominal width, indicating the switchboard configuration for which the kit is intended. This measurement should not be interpreted as the physical width of the installation kit itself. The exact manufactured dimensions, mounting positions and required installation clearances must be established from the relevant ABB technical drawings.
The PVCX3607 supports a coordinated installation approach within ABB System pro E Power structures. Panel builders should confirm that the enclosure width, internal mounting arrangement, selected XT3 devices and any required plug-in connection components correspond to the intended ABB configuration.
Where multiple circuit-breakers are installed in one switchboard section, attention must also be given to cable routing, connection access, ventilation and the arrangement of neighbouring equipment. The complete assembly design determines whether the proposed installation satisfies the required operating and maintenance conditions.
Using the correct ABB kit for the specified vertical arrangement helps maintain consistency with the intended switchboard layout. However, the kit itself does not independently establish the electrical performance, thermal behaviour or protection characteristics of the completed installation.
The ABB System pro E Power platform provides a modular framework for low-voltage electrical switchboard construction. Compatible assemblies may incorporate circuit-breakers, busbars, supporting structures, internal segregation barriers and dedicated installation accessories such as the PVCX3607.
The PVCX3607 serves a mechanical installation function within this system. It is not itself an XT3 circuit-breaker and should not be assigned the rated current, breaking capacity or protective characteristics of the devices it is intended to accommodate.
The completed switchboard's electrical characteristics depend on the selected circuit-breakers, their connection arrangements, the busbar system, conductor sizing, installation conditions and the verified assembly design. Any applicable IEC/EN 61439 requirements must be addressed at the complete switchboard level.
Likewise, the installation kit does not independently determine the switchboard's internal segregation form or ingress protection rating. Where the design requires Form 2, Form 3 or Form 4 internal separation, the appropriate segregation components and terminal arrangements must be incorporated in addition to the circuit-breaker installation equipment.
The correct selection of the ABB PVCX3607 should therefore be considered alongside the overall switchboard design, including mechanical compatibility, electrical connection requirements, assembly verification and the intended operating environment.
Before ordering the ABB PVCX3607, confirm that the intended switchboard belongs to the System pro E Power range and uses a compatible 600 mm nominal width configuration.
Next, verify that the installation requires two ABB SACE Tmax XT3 circuit-breakers in a vertical plug-in arrangement. The selected devices should be checked for the appropriate 3-pole or 4-pole execution and for compatibility with the required plug-in connection equipment.
The manufacturer order code 1STQ009148A0000 should be used in procurement documents, bills of materials and replacement-part enquiries. This helps distinguish the PVCX3607 from installation kits intended for other XT frames, different mounting orientations or alternative switchboard widths.
Before assembly, consult the relevant ABB technical documentation to confirm the supplied kit contents, required fixing components, mounting positions and any additional accessories. The manufacturer designation identifies the intended installation configuration but does not, by itself, confirm that circuit-breakers or plug-in bases are included in the package.
Installation should be carried out by qualified personnel following ABB's applicable assembly instructions. The finished switchboard must be verified as a complete assembly to ensure that its mechanical installation and electrical performance meet the project requirements.
| Product group | System pro E Power |
|---|---|
| Manufacturer order code | 1STQ009148A0000 |
| Product designation | 2 XT3 KIT 3-4P PLUG IN VERT.W=600MM |
| Product type | Circuit-breaker installation kit |
| Product category | Electrical switchboard mounting accessories |
| Compatible circuit-breaker family | ABB SACE Tmax XT |
| Compatible circuit-breaker frame | XT3 |
| Specified circuit-breaker quantity | 2 |
| Supported pole configurations | 3-pole and 4-pole |
| Circuit-breaker execution | Plug-in |
| Installation orientation | Vertical |
| Nominal switchboard width | 600 mm |
| Compatible switchboard system | ABB System pro E Power |
| Application | Low-voltage electrical distribution assemblies |
| Primary function | Installation of two compatible XT3 plug-in circuit-breakers |
| Mounting arrangement | Vertical circuit-breaker installation |
| Physical kit dimensions | Confirm against the applicable ABB technical drawing |
| Material and finish | Confirm against the ABB product datasheet |
| Kit contents | Confirm against the ABB assembly documentation |
| Net weight | Confirm against the ABB product datasheet |
| Circuit-breakers included | Not established by the supplied designation; confirm supply contents before ordering |
| Electrical ratings | Determined by the selected circuit-breakers and verified switchboard assembly |
| Applicable assembly standard | IEC/EN 61439, as relevant to the completed switchboard |
The ABB PVCX3607 is an installation kit designed for a vertical arrangement of two compatible ABB SACE Tmax XT3 plug-in circuit-breakers within a 600 mm nominal width ABB System pro E Power switchboard configuration.
The official ABB manufacturer order code for the PVCX3607 is 1STQ009148A0000. This reference should be used when ordering or identifying the installation kit.
The manufacturer designation specifies an arrangement for two ABB SACE Tmax XT3 circuit-breakers. The selected devices must be compatible with the required plug-in execution and vertical installation configuration.
Yes. The manufacturer's designation explicitly identifies 3-pole and 4-pole XT3 configurations. The complete device execution and associated connection equipment must still be checked against ABB's installation documentation.
The designation identifies a kit for two XT3 circuit-breakers, suitable for compatible 3-pole or 4-pole plug-in executions, installed in a vertical arrangement within a switchboard configuration having a 600 mm nominal width.
The PVCX3607 is specifically designated for plug-in XT3 circuit-breaker configurations. Compatibility with fixed or withdrawable executions should not be assumed. Use the ABB installation kit specified for the selected circuit-breaker execution.
The manufacturer designation describes an installation kit for two XT3 circuit-breakers, but it does not establish that the circuit-breakers themselves are supplied. Confirm the package contents and any required plug-in components with the supplier or ABB documentation before ordering.
Not necessarily. The 600 mm measurement identifies the nominal switchboard width for the intended installation configuration. The kit's exact physical dimensions should be verified using the relevant ABB technical drawing.
The PVCX3607 is specifically identified for the ABB SACE Tmax XT3 frame. Compatibility with XT1, XT2, XT4 or other circuit-breaker frames should not be assumed. Select the manufacturer-designated installation kit for the required device.
No. The PVCX3607 is a circuit-breaker installation accessory. The rated current, breaking capacity and protective characteristics depend on the selected XT3 circuit-breakers and the verified electrical switchboard assembly.
Confirm the ABB System pro E Power enclosure configuration, 600 mm nominal width, requirement for two XT3 circuit-breakers, correct 3-pole or 4-pole plug-in execution and vertical mounting arrangement. Also verify the kit contents, fixing components and associated plug-in equipment against ABB's assembly instructions.
ABB System pro E Power accessories support professional modular low-voltage switchboard construction for industrial and commercial electrical distribution. The ABB PVCX3607 XT3 plug-in vertical installation kit provides a configuration-specific solution for panel builders and electrical engineers integrating two compatible 3-pole or 4-pole ABB SACE Tmax XT3 circuit-breakers into a 600 mm nominal width System pro E Power switchboard arrangement.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.