1STQ009121A0000 ABB PRVS1010 Vertical Rear Segregation H1000 W1000 NO I.UP

Why Choose the ABB PRVS1010 Vertical Rear Segregation Component?

The ABB PRVS1010 (1STQ009121A0000) is a dedicated vertical rear segregation component from the ABB System pro E Power range, intended for integration into compatible low-voltage electrical distribution switchboards. Its manufacturer designation, SEGR.VER.REAR H=1000MM W=1000MM NO I.UP, identifies a rear-positioned vertical segregation arrangement specified for a nominal height of 1000 mm and width of 1000 mm.

Designed for use within the ABB System pro E Power modular switchboard platform, the PRVS1010 supports organised internal separation arrangements in professionally engineered electrical assemblies. It is relevant to electrical panel builders, switchboard manufacturers and installation specialists who require segregation components matched to the intended compartment layout.

The PRVS1010 is distinguished by its vertical rear orientation, 1000 mm nominal height, 1000 mm nominal width and the manufacturer's NO I.UP configuration reference. These details help identify the intended product variant and should be checked against ABB assembly documentation when specifying the component for a new installation or selecting a replacement.

Key Advantages

• Dedicated vertical rear segregation component for ABB System pro E Power switchboards.
• Specified for a nominal height of 1000 mm.
• Identified for a nominal width of 1000 mm.
• Designed for compatible rear-positioned internal segregation arrangements.
• Includes the manufacturer's NO I.UP configuration designation.
• Supports organised separation between designated internal switchboard areas.
• Helps professional panel builders select accessories according to the intended assembly layout.
• Forms part of the modular ABB System pro E Power platform.
• Provides a clearly identified option for rear segregation rather than lateral or horizontal arrangements.
• Relevant to compatible industrial and commercial low-voltage distribution projects.
• Identified by ABB order code 1STQ009121A0000 for accurate procurement and replacement.

Key Features

• ABB System pro E Power modular switchboard accessory.
• PRVS1010 vertical rear segregation component.
• ABB manufacturer order code: 1STQ009121A0000.
• Segregation orientation: Vertical.
• Segregation position: Rear.
• Nominal height: 1000 mm.
• Nominal width: 1000 mm.
• Manufacturer configuration reference: NO I.UP.
• Intended for compatible internal separation arrangements within low-voltage switchboards.
• Designed for integration with appropriate ABB System pro E Power structural components.
• Supports planned internal compartment layouts in professionally constructed switchboards.
• Suitable for new assembly projects and matching component replacement applications.

Vertical Rear Segregation for ABB System pro E Power Switchboards

Internal segregation is an important consideration in low-voltage switchboard design. Depending on the required configuration, separation components can help establish boundaries between functional units, equipment spaces and connection compartments. Correctly selected segregation accessories support the intended internal layout and must be considered as part of the complete switchboard assembly.

The ABB PRVS1010 is specifically identified as a vertical rear segregation component. Its vertical orientation and rear positioning distinguish it from horizontal segregation accessories and vertical lateral separation components. Selecting the appropriate orientation is essential when following the intended compartment arrangement in ABB System pro E Power switchboards.

The manufacturer specifies a nominal 1000 mm height and 1000 mm width for the PRVS1010. These values are important for identifying the intended switchboard configuration and determining whether the accessory matches the planned assembly. They should not automatically be interpreted as independently verified overall physical dimensions of the individual component.

The product description also includes the configuration notation NO I.UP. This is an ABB manufacturer reference that distinguishes the specified configuration. Its precise technical meaning and any associated installation requirements should be confirmed using the relevant ABB catalogue, assembly drawings and installation instructions rather than inferred from the abbreviation alone.

The ABB System pro E Power range provides a modular platform for constructing low-voltage electrical distribution switchboards. It includes structural elements, mounting accessories, internal panels and segregation components that allow professional panel builders to develop assemblies suited to different equipment layouts and installation requirements.

Rear segregation components are selected as part of a wider internal assembly arrangement. Their effectiveness depends on the surrounding switchboard structure, adjoining barriers, installed equipment and specified mounting method. The PRVS1010 should therefore be used only within a compatible configuration that incorporates the appropriate associated ABB components.

The 1000 mm nominal width makes the PRVS1010 a designated option for compatible switchboard arrangements requiring that width. However, compatibility should not be assumed solely from a matching dimensional value. The enclosure design, adjoining components and relevant configuration references must also be checked.

An individual segregation accessory does not independently determine the completed switchboard's form of internal separation, ingress protection rating or electrical performance. These characteristics depend on the overall assembly design and verification. Where applicable, completed low-voltage switchgear and controlgear assemblies should be designed and verified against the relevant requirements of IEC 61439-1 and IEC 61439-2.

For new installations and maintenance projects, the manufacturer's model PRVS1010 and order code 1STQ009121A0000 should be checked against the project bill of materials and ABB technical documentation. This helps ensure that the selected component matches the intended rear segregation arrangement.

Selecting the Correct ABB PRVS1010 Segregation Component

Accurate selection begins with the product's full manufacturer designation: SEGR.VER.REAR H=1000MM W=1000MM NO I.UP. This description identifies the segregation orientation, rear position, nominal configuration dimensions and additional manufacturer reference.

The PRVS1010 should not be confused with similarly named ABB System pro E Power accessories. Even where products share the same segregation orientation and width, differences in height or configuration notation may affect their suitability for a particular switchboard design.

For example, the ABB PRVS8010, order code 1STQ009120A0000, is specified for a nominal height of 800 mm and width of 1000 mm. By comparison, the PRVS1010 is specified for a nominal height of 1000 mm and width of 1000 mm. Both carry the NO I.UP configuration reference, but their different height designations mean interchangeability should not be assumed.

When preparing a bill of materials, use ABB order code 1STQ009121A0000 alongside the model designation. For replacement work, confirm that the original assembly requires the same product reference and that no additional components or revised installation instructions apply.

The supplied specification does not state the product's nominal depth, material, fixing method or included mounting hardware. These details should be obtained from the appropriate ABB technical documentation before installation.

Typical Applications

• ABB System pro E Power modular low-voltage switchboards.
• Internal vertical rear segregation arrangements.
• Compatible switchboard configurations requiring a nominal 1000 mm height.
• Rear segregation arrangements specified for a nominal 1000 mm width.
• Internal separation configurations incorporating the NO I.UP manufacturer reference.
• Industrial low-voltage electrical distribution cabinets.
• Commercial building power distribution switchboards.
• Main distribution board assembly projects.
• Modular switchgear and controlgear construction.
• Professional electrical panel manufacturing and integration.
• Replacement of matching PRVS1010 components in compatible ABB System pro E Power assemblies.