Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ009112A0000 ABB PRVS1040 Rear Vertical Segregation H1000 W400 System pro E Power
ABB PRVS1040 (1STQ009112A0000) is a rear vertical segregation component for ABB System pro E Power modular low-voltage switchboards, specified for a nominal height of 1000 mm and width of 400 mm with the manufacturer’s NO I.UP configuration reference.
£88.13
Why Choose the ABB PRVS1040 Rear Vertical Segregation Panel for System pro E Power?
The ABB PRVS1040 is a dedicated rear vertical segregation component for the ABB System pro E Power modular low-voltage switchboard range. Designed for internal compartment separation, this accessory supports the construction of organised electrical distribution assemblies by providing a designated rear segregation arrangement within compatible switchboard configurations.
The PRVS1040 carries the manufacturer designation SEGR.VERT.REAR H=1000MM W=400MM NO I.UP, identifying a rear vertical segregation component specified for a nominal height of 1000 mm and width of 400 mm. The description also includes the configuration reference NO I.UP, which should be considered when selecting the correct accessory for the intended System pro E Power assembly.
Identified by ABB order code 1STQ009112A0000, the PRVS1040 provides a system-specific solution for professional switchboard manufacturers and electrical panel builders. Its designated rear installation position and dimensional configuration make it relevant to industrial and commercial low-voltage distribution projects where coordinated internal segregation is required.
Key Advantages
- Dedicated rear vertical segregation: Supports physical separation between designated internal switchboard areas.
- ABB System pro E Power integration: Belongs to ABB's modular low-voltage switchboard accessory range.
- 1000 mm nominal height: Matches the specified vertical segregation configuration.
- 400 mm nominal width: Intended for compatible switchboard arrangements requiring this width.
- Rear installation arrangement: Specifically identified for rear vertical compartment separation.
- Defined configuration reference: Manufacturer designation includes NO I.UP for accurate component selection.
- Organised compartment construction: Helps establish the intended internal separation layout.
- Coordinated system assembly: Supports integration with appropriately selected ABB structural and segregation accessories.
- Professional panel-building applications: Relevant to industrial and commercial electrical distribution assemblies.
- Clear product identification: Dedicated model and ABB order code simplify specification, procurement and replacement planning.
Key Features
- ABB System pro E Power switchboard accessory.
- Product designation: PRVS1040.
- ABB manufacturer order code: 1STQ009112A0000.
- Manufacturer description: SEGR.VERT.REAR H=1000MM W=400MM NO I.UP.
- Product type: Rear vertical segregation component.
- Segregation orientation: Vertical.
- Designated installation position: Rear.
- Nominal segregation height: 1000 mm.
- Nominal segregation width: 400 mm.
- Manufacturer configuration reference: NO I.UP.
- Intended for internal compartment separation in compatible switchboard assemblies.
- Designed for integration within ABB System pro E Power modular structures.
- Supports coordinated selection of internal segregation and enclosure accessories.
Reliable Rear Vertical Segregation for Modular Low-Voltage Switchboards
Internal segregation is an important consideration in the design and construction of low-voltage electrical distribution switchboards. Appropriately positioned separation components help establish physical boundaries between designated functional areas, supporting an organised internal arrangement of electrical equipment, busbar systems and associated connections.
The ABB PRVS1040 is specified as a rear vertical segregation component for a nominal configuration measuring 1000 mm in height and 400 mm in width. Its rear installation designation distinguishes it from front, lateral and horizontal segregation accessories used elsewhere within the System pro E Power range. These nominal dimensions describe the specified configuration and should not automatically be interpreted as independently verified overall physical dimensions of the supplied accessory.
The manufacturer's NO I.UP reference identifies a particular segregation configuration. Its detailed meaning and the associated installation requirements should be confirmed against the applicable ABB System pro E Power technical documentation. The PRVS1040 should be selected alongside the appropriate structural components, compartment barriers and mounting accessories required for the complete switchboard design.
The presence of an individual segregation accessory does not independently establish the finished switchboard's internal separation classification, ingress protection rating or electrical performance. These characteristics depend on the complete assembly, including the installation of all required barriers and enclosure components. The finished switchboard should be designed and verified in accordance with applicable requirements, including the relevant IEC/EN 61439 standards where appropriate.
Typical Applications
- ABB System pro E Power modular low-voltage switchboards.
- Rear vertical segregation in compatible electrical distribution assemblies.
- Internal compartment separation requiring a nominal height of 1000 mm.
- Rear segregation arrangements requiring a nominal width of 400 mm.
- Switchboard configurations incorporating the manufacturer's NO I.UP designation.
- Industrial main electrical distribution switchboards.
- Commercial building low-voltage power distribution assemblies.
- Internal separation of designated switchboard functional areas.
- OEM electrical panel building and switchboard manufacturing.
- Refurbishment or modification of compatible ABB System pro E Power assemblies.
Technical Specifications
| Product range | System pro E Power |
|---|---|
| Product model | PRVS1040 |
| ABB order code | 1STQ009112A0000 |
| Manufacturer description | SEGR.VERT.REAR H=1000MM W=400MM NO I.UP |
| Product type | Rear vertical segregation component |
| Product category | Internal switchboard segregation accessories |
| Segregation orientation | Vertical |
| Installation position | Rear |
| Nominal configuration height | 1000 mm |
| Nominal configuration width | 400 mm |
| Nominal configuration | H1000 × W400 |
| Manufacturer configuration reference | NO I.UP |
| Compatible switchboard system | ABB System pro E Power |
| Primary function | Rear vertical compartment separation |
| Application | Modular low-voltage switchboard assemblies |
| ABB product group | System Pro E Power |
Frequently Asked Questions
What is the ABB PRVS1040 used for?
The ABB PRVS1040 is a rear vertical segregation component for compatible ABB System pro E Power low-voltage switchboards. It supports internal compartment separation within the designated rear installation arrangement.
What dimensions is the ABB PRVS1040 specified for?
The PRVS1040 is specified for a nominal height of 1000 mm and width of 400 mm. These dimensions identify the intended segregation configuration rather than independently confirmed overall physical dimensions of the supplied component.
Where is the ABB PRVS1040 installed?
The manufacturer's description identifies the PRVS1040 as a rear vertical segregation component. It is intended for the designated rear separation arrangement within a compatible ABB System pro E Power switchboard. The exact mounting position and required supports should be confirmed using ABB assembly documentation.
What does NO I.UP mean in the ABB PRVS1040 description?
NO I.UP is a manufacturer configuration reference included in the PRVS1040 product description. Its precise meaning and associated installation requirements should be confirmed using the relevant ABB System pro E Power technical documentation rather than inferred from the abbreviation alone.
What is the ABB order code for the PRVS1040?
The ABB manufacturer order code is 1STQ009112A0000. It identifies the PRVS1040 rear vertical segregation component for the specified 1000 mm × 400 mm configuration within the ABB System pro E Power range.
Designed for Professional Switchboard Builders and Electrical Engineers
ABB System pro E Power segregation accessories support coordinated low-voltage switchboard construction, helping electrical engineers and panel builders select system-compatible components for organised internal compartments and professionally designed electrical distribution assemblies.
