Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PRVS7040 (1STQ009110A0000) is a vertical rear segregation component for compatible ABB System Pro E Power low-voltage switchboards, designated for a nominal height of 700 mm and width of 400 mm with the manufacturer-specific NO I.UP. configuration reference.
£79.08
The ABB PRVS7040, manufacturer order code 1STQ009110A0000, is a dedicated vertical rear segregation component for the ABB System Pro E Power low-voltage switchboard range. Identified by the manufacturer designation SEGR.VERT.REAR H=700MM W=400MM NO I.UP., this accessory is intended for compatible switchboard arrangements requiring vertical internal separation at the rear of the assembly.
Specified for a 700 mm nominal height and 400 mm nominal width configuration, the ABB PRVS7040 supports the construction of defined internal compartment boundaries within modular electrical distribution assemblies. Its vertical rear segregation design helps panel builders select the appropriate separation component for the corresponding enclosure arrangement.
The manufacturer designation also includes NO I.UP., which identifies a specific configuration requirement within the ABB System Pro E Power system. As the supplied designation does not fully define this abbreviation, its precise application should be confirmed against the relevant ABB assembly documentation. The PRVS7040 provides a clearly identifiable manufacturer component for professional switchboard construction, specification and compatible maintenance projects.
Internal separation is an important design consideration in low-voltage switchgear and controlgear assemblies. Depending on the intended arrangement, segregation components help establish physical boundaries between busbar areas, functional units, cable spaces and other internal sections. The complete separation system must be coordinated with the enclosure structure and associated electrical equipment.
The ABB PRVS7040 vertical rear segregation component is intended to contribute to the manufacturer-specified internal separation arrangement within a compatible System Pro E Power switchboard. Its vertical orientation and rear installation position distinguish it from horizontal segregation accessories and components designed for other internal locations.
The specified 700 mm height and 400 mm width are important selection parameters for the corresponding switchboard configuration. These nominal values should not be interpreted as independently verified external measurements of the individual component without checking ABB's technical drawings. The additional NO I.UP. reference must also be matched to the appropriate manufacturer installation instructions.
The PRVS7040 is one part of a complete modular switchboard assembly. Installing this accessory alone does not establish a particular Form 2, Form 3 or Form 4 internal separation classification or certify compliance with IEC 61439-2. The achieved segregation arrangement, electrical ratings, degree of protection and conformity with applicable standards depend on the complete assembly design, associated components and appropriate verification.
| Product series | System Pro E Power |
|---|---|
| ABB order code | 1STQ009110A0000 |
| Manufacturer designation | SEGR.VERT.REAR H=700MM W=400MM NO I.UP. |
| Product type | Vertical rear segregation component |
| Product category | Low-voltage switchboard internal segregation accessories |
| Segregation orientation | Vertical |
| Segregation position | Rear |
| Nominal configuration height | 700 mm |
| Nominal configuration width | 400 mm |
| Manufacturer height reference | H=700MM |
| Manufacturer width reference | W=400MM |
| Additional configuration reference | NO I.UP. |
| Compatible system | ABB System Pro E Power |
| Primary function | Internal vertical rear segregation in the specified switchboard configuration |
| Application | Low-voltage electrical distribution switchboards |
The ABB PRVS7040 is a vertical rear segregation component for compatible ABB System Pro E Power low-voltage switchboards. It supports the construction of defined internal separation boundaries at the rear of the specified switchboard arrangement.
The manufacturer designation specifies a nominal height of 700 mm and width of 400 mm. These values identify the intended segregation configuration and should not be treated as verified external dimensions of the individual component without consulting ABB technical documentation.
SEGR.VERT.REAR identifies a vertical rear segregation component. It describes the intended orientation and position within a compatible switchboard arrangement, distinguishing the product from horizontal or differently positioned segregation accessories.
NO I.UP. is an additional manufacturer-specific configuration reference in the ABB PRVS7040 designation. Its precise meaning and installation implications should be verified against the applicable ABB System Pro E Power assembly documentation rather than inferred from the abbreviation alone.
The ABB manufacturer order code is 1STQ009110A0000. It identifies the PRVS7040 vertical rear segregation component for the specified 700 mm high, 400 mm wide, NO I.UP. System Pro E Power configuration.
ABB System Pro E Power provides a modular platform for professional low-voltage electrical distribution assemblies. The ABB PRVS7040 vertical rear segregation component, order code 1STQ009110A0000, offers a manufacturer-designated solution for compatible 700 mm height and 400 mm width configurations identified by the NO I.UP. reference, supporting organised internal separation and coordinated integration within the wider switchboard system.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.