Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ009106A0000 ABB PRVS1062 Rear Vertical Segregation Panel H1000 W600 System pro E Power
ABB PRVS1062 (1STQ009106A0000) is a pickled sheet steel rear vertical segregation panel for 1000 mm high and 600 mm wide outgoing-side compartment arrangements in compatible System pro E Power main distribution switchboards with an intermediate rear upright.
£54.06
Why Choose the ABB PRVS1062 System pro E Power Rear Vertical Segregation Panel?
The ABB PRVS1062 (1STQ009106A0000) is a purpose-designed rear vertical segregation panel for ABB System pro E Power main distribution switchboards. Developed for compatible structures incorporating an intermediate rear upright, this accessory provides physical separation on the outgoing circuit side of a low-voltage electrical distribution assembly. Its specified installation configuration is 1000 mm high × 600 mm wide.
As part of the ABB System pro E Power range, the PRVS1062 supports structured internal segregation in modular switchboards. It is designed for vertical circuit-breaker segregation arrangements where the rear barrier extends between the intermediate upright and the structural rear upright on the outgoing side. This dedicated configuration helps electrical panel builders select the appropriate segregation component for a defined compartment layout.
Manufactured from pickled sheet steel, the ABB PRVS1062 combines durable mechanical construction with a precise installation profile. Its published physical dimensions are 995 mm high, 265.7 mm wide and 22 mm deep, with a net weight of approximately 4.205 kg. Designed for integration into compatible ABB System pro E Power structures, it is a practical choice for industrial and commercial switchboard construction, refurbishment and maintenance.
Key Advantages
- Purpose-designed rear vertical segregation panel for ABB System pro E Power switchboards.
- Specified for 1000 mm high × 600 mm wide switchboard segregation arrangements.
- Designed for structures incorporating an intermediate rear upright.
- Provides physical separation on the outgoing circuit side of compatible distribution assemblies.
- Durable pickled sheet steel construction for professional electrical panel building.
- 995 mm physical height for the specified vertical installation arrangement.
- Compact 265.7 mm physical width and 22 mm depth.
- Supports organised internal compartment layouts and structured switchboard construction.
- Designed for integration with compatible ABB System pro E Power mounting and segregation components.
- Suitable for industrial and commercial low-voltage main distribution boards.
- Available as an individual accessory for new installations and compatible replacement applications.
Key Features
- ABB System pro E Power modular switchboard accessory.
- PRVS1062 rear vertical segregation panel.
- ABB manufacturer order code 1STQ009106A0000.
- Designed for vertical circuit-breaker segregation.
- Intended for the rear outgoing circuit side of compatible switchboard structures.
- Suitable for structures with an intermediate rear upright.
- 1000 mm nominal segregation height.
- 600 mm nominal configuration width.
- 995 mm physical component height.
- 265.7 mm physical component width.
- 22 mm physical component depth.
- Pickled sheet steel material.
- Mechanical divider panel for internal switchboard segregation.
- Approximately 4.205 kg net weight.
- Compatible with appropriate ABB System pro E Power enclosure and mounting structures.
- RoHS and REACH compliance documentation available.
Reliable Rear Vertical Segregation for Main Distribution Switchboards
The ABB PRVS1062 rear vertical segregation panel is designed for switchboard structures incorporating an intermediate rear upright. In this arrangement, the segregation panel is positioned on the outgoing circuit side, creating a physical barrier between the intermediate upright and the structural rear upright. This helps establish the compartment boundaries required by the selected switchboard layout.
ABB specifies the PRVS1062 for a nominal segregation arrangement of 1000 mm in height and 600 mm in width. These values identify the intended installation configuration rather than the overall dimensions of the individual component. The actual panel measures 995 mm high × 265.7 mm wide × 22 mm deep, making it important to distinguish between the nominal switchboard configuration and the manufactured accessory dimensions.
Within the ABB System pro E Power modular platform, rear segregation panels help electrical panel builders create organised internal layouts around circuit-breaker installations, busbar systems and outgoing connections. The PRVS1062 is intended for use with compatible structural uprights and associated segregation components, allowing the completed assembly to be configured according to its electrical distribution requirements.
The panel's pickled sheet steel construction provides a robust mechanical barrier suitable for professional switchboard assembly. ABB's segregation system includes configurations supporting different forms of internal separation, but an individual panel does not independently establish a completed switchboard's segregation classification. The final form depends on the correct combination and installation of all necessary internal barriers, mounting components and terminal arrangements.
The PRVS1062 is a mechanical enclosure accessory rather than a complete main distribution board or protective switching device. It does not independently determine current ratings, short-circuit withstand capability or ingress protection. Installation should follow the relevant ABB System pro E Power assembly instructions and applicable IEC/EN 61439 requirements.
Typical Applications
- ABB System pro E Power main distribution switchboards.
- Rear vertical segregation on the outgoing circuit side.
- Switchboard structures incorporating an intermediate rear upright.
- Vertical circuit-breaker segregation arrangements.
- 1000 mm high and 600 mm wide nominal segregation configurations.
- Industrial main electrical distribution boards.
- Commercial building power distribution systems.
- Modular low-voltage switchboard manufacturing.
- Industrial manufacturing and processing facilities.
- Electrical infrastructure for industrial automation systems.
- OEM electrical panel building and switchboard assembly.
- Compatible switchboard maintenance, refurbishment and divider panel replacement.
Technical Specifications
| Product group | System pro E Power |
|---|---|
| Series | PRVS |
| Manufacturer order code | 1STQ009106A0000 |
| Product designation | SEGR.VERT.REAR H=1000MM W=600MM INT.UP. |
| Product type | Rear vertical segregation panel |
| Product category | Electrical switchboard enclosure accessories |
| Accessory classification | Divider panel / assembly plate |
| Segregation orientation | Vertical |
| Segregation location | Rear, outgoing circuit side |
| Required structure arrangement | Intermediate rear upright |
| Nominal segregation height | 1000 mm |
| Nominal configuration width | 600 mm |
| Physical component height | 995 mm |
| Physical component width | 265.7 mm |
| Physical component depth | 22 mm |
| Material | Pickled sheet steel |
| Net weight | 4.205 kg |
| Compatible enclosure system | ABB System pro E Power |
| Suitable product class | Main Distribution Boards |
| Installation type | Internal switchboard mounting |
| Primary function | Rear vertical separation of the outgoing circuit compartment |
| Pack quantity | 1 piece |
| GTIN / EAN | 8015646796172 |
| Country of origin | Italy |
| ETIM classification | EC002525 – Divider panel (enclosure/cabinet) |
| Compliance documentation | RoHS, REACH and CE declaration of conformity |
Frequently Asked Questions
What is the ABB PRVS1062 used for?
The ABB PRVS1062 is a rear vertical segregation panel used to provide physical separation on the outgoing circuit side of compatible ABB System pro E Power main distribution switchboards incorporating an intermediate rear upright.
What are the nominal installation dimensions of the ABB PRVS1062?
The PRVS1062 is specified for a 1000 mm nominal segregation height and 600 mm nominal configuration width. These values describe the intended switchboard arrangement rather than the manufactured panel dimensions.
What are the actual physical dimensions of the ABB PRVS1062?
The published physical dimensions are 995 mm high, 265.7 mm wide and 22 mm deep. These measurements should be distinguished from the nominal 1000 mm × 600 mm installation configuration.
What material is the ABB PRVS1062 manufactured from?
The PRVS1062 is manufactured from pickled sheet steel, providing a durable mechanical divider panel for compatible ABB System pro E Power low-voltage switchboard assemblies.
What is an intermediate rear upright and why is it relevant?
An intermediate rear upright is an additional structural support within a compatible switchboard arrangement. The PRVS1062 is designed to provide vertical rear segregation between this intermediate upright and the structural rear upright on the outgoing circuit side.
What is the difference between the ABB PRVS1062 and PRVS8062?
Both models are rear vertical segregation accessories for compatible System pro E Power structures with an intermediate rear upright and a 600 mm nominal configuration width. The PRVS1062 is specified for a 1000 mm nominal height, whereas the PRVS8062 is specified for an 800 mm nominal height.
What is the difference between the ABB PRVS1062 and PRVS1082?
Both models are specified for a 1000 mm nominal segregation height. The PRVS1062 is intended for a 600 mm nominal configuration width, while the PRVS1082 is intended for an 800 mm nominal configuration width. Selection depends on the switchboard's internal structural arrangement.
Is the ABB PRVS1062 a complete main distribution board?
No. Although it is classified for use with Main Distribution Boards, the PRVS1062 is an internal mechanical divider panel, not a complete electrical switchboard or protective switching device. It must be installed with compatible enclosure structures and the other components required by the finished assembly.
What is the ABB order code and EAN for the PRVS1062?
The official ABB manufacturer order code is 1STQ009106A0000, and the EAN is 8015646796172. These identifiers correspond to the PRVS1062 rear vertical segregation panel for the specified 1000 mm high and 600 mm wide installation arrangement.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power components support professional modular low-voltage distribution switchboard construction for industrial and commercial applications. The ABB PRVS1062 rear vertical segregation panel provides a purpose-designed solution for electrical engineers, switchboard manufacturers and panel builders requiring structured outgoing-side compartment separation in compatible 1000 mm high and 600 mm wide segregation arrangements.
